Categories: Tank Cleaner-20
Images: Alt
Product Short Description: pH-neutral, liquid concentrated detergent with good cleaning qualities. It contains effective but mild and environmentally safe wetting agents and surfactants that allow rapid penetration to remove fats and oils. UNI-POLL Detergent is especially suitable for hydrocar
Product Description:

Neutral pH Detergent is liquid concentrated detergent with good cleaning qualities. It contains effective but mild and environmentally safe wetting agents and surfactants that allow rapid penetration to remove fats and oils. Neutral pH Detergent is especially suitable for hydrocarbon freeing of tanks, and is safe on all tank coatings including zinc silicate.

Product Application:

For the removal of traces of hydrocarbons to a hydrocarbon free wall wash test specification prior to loading of sensitive cargoes. Neutral pH Detergent may also be used as a general purpose economical tank cleaning detergent.

Product Dose:

The most economical method of using RXSOL Neutral pH Detergent is by recirculation washing, using tank cleaning machines. Make up a solution of 1–5% in preferably fresh water in the tank and recirculate. Whenever possible, the cleaning solution should be heated to 50–80°C. Rinse off with hot fresh water. Alternatively, hand spray the tank with a 20–50% solution of RXSOL Neutral pH Detergent and allow to stay for 30–60 minutes before a final rinse with hot water. When the tank is cleaned to a “water white standard”, remove any free water and ventilate until the tank is dry.

Product Note:
  • Non-caustic, pH neutral.
  • Solvent free
  • Non-flammable.
  • Does not contain nonyl phenol ethoxylates or otherestrogenic compounds.
  • Non-corrosive to metals.
  • Suitable for all tank-coatings.
  • Can be used for gas and hydrocarbon-freeing of tanks.
  • Can be used for deodorizing.
  • Complies with all environmental regulations and the EU Detergent Regulation
Product Technical Specification:

APPEARANCE

Light yellow liquid

DENSITY, in g/cm3 at 15°C:

1.1

FLASH POINT, (PMCC) in °C:

N/A

pH, in conc. at 20°C:

8-9

pH, in 1% at 20°C:

7–8

COMPATIBILITY:

 

Metal:

The product is compatible

with all normally used metals

and their alloys.

Rubber:

No known effect.

Synthetic rubber:

No known effect.

Remarks:
prod_useful_area:
Product Supply Location:
stock-clearance.png