Buffer Cleaner
Oman Chemical is leading one Largest Supplier, Manufacture a
Your shopping cart is empty.
| Product Name | : | Castor Oil |
| CAS number | : | 8001-79-4 |
| UN number | : | |
| Formula | : | |
| Odour | : | Faint , Mild |
| Solubility in water | : | Insoluble |
| Density | : | 0.955 at 25 oC |
| Boiling point | : | oC |
| Melting point | : | -12 oC |
| Viscosity | : | 9.35 cp at 20 oC |
| Flashpoint | : | 229 oC |
| Explosive limits | : | |
| Vapour pressuer | : | |
| Skin absorption/irritation | : | NO |
| TLV Country | : | |
| Pollution category 1994 | : | D |
Castor oil incredible benefits for beautiful skin and hair.
Castor Oil are for Domestic, industrial and technical use in paints, printing inks, synthetic (alkyd) resins, varnishes, adhesives, plasticisers, sealants, leather, foundries, wood & timber preservation / treatment, glass putty, etc. Also, the biodiesel or methyl esters find use as fuel, solvent, lubricant, adjuvant, cleaner, metal pre-treatment (degreasing). Methyl ester sulfonates can be prepared from these for use in detergents.
|
Appearance: |
Clear to slightly Hazy liquid |
|
Odor |
Characteristic odor. |
|
Boiling Point: |
100ºC |
|
Vapor Pressure: |
N/A |
| Vapor Density (Air = 1): | N/D |
|
Solubility in Water: |
Miscible |
|
Specific Gravity (H2O=1): |
1.100-1.250 |
|
Evaporation Rate |
.1 |
| Water Reactive : |
No |
Advantages:-
Harmless to paint, rubber, windshields, and ordinary glass. Removes and cleans a wide range of deposits and soils quickly. Can be diluted for economical use. Reduced hazard to user and surfaces.Contains acombination of acids, detergents, wetting and penetrating agents. Contains a odor control agent to reduce fumes. C.R.M.C.-83 is inhibited against attacking most metals and paint when used in diluted form.
Dissolves grease, paint, ink, grime, dirt, tar and difficult to clean substances. Smooth, gelatin, waterless hand cleaner for engineers.
Physical Properties :
|
Active ingredients |
: 920 - 95% |
|
Appearance |
: Gritty paste |
|
Odour |
: Almond |
|
pH |
: 9-10 |
|
Solvent |
: Non |
|
Flash Point |
: None |
|
Boiling Point |
: None |
|
Specific Gravity |
: 1.4 – 1.45 |
|
Miscibility |
: Apart fromthe abrasive the product is completely miscible in hot or cold water |
Water less Hand Cleaner manufacturer and supplier in Mumbai, Kandla, Chennai, Visakhapatnam, Kolkata, Fujairah, Dubai, Sharjah, Abudhabi.
|
Property |
Unit |
Result |
||
|
|
|
50 cSt |
100 cSt |
200 cSt |
|
Appearance |
|
Crystal clear |
Crystal clear |
Crystal clear |
|
Specific Gravity at 25°C (77°F) |
|
0.960 |
0.964 |
0.967 |
|
Refractive Index at 25°C (77°F) |
|
1.4022 |
1.4030 |
1.4032 |
|
Color, APHA |
|
5 |
5 |
5 |
|
Flash Point, Open Cup |
°C (°F) |
318 (605) |
> 326 (> 620) |
> 326 (> 620) |
|
Acid Number, BCP |
|
Trace |
Trace |
Trace |
|
Melt Point |
°C (°F) |
-41 (-42) |
-28 (-18) |
-27 (-17) |
|
Pour Point |
°C (°F) |
-70 (-94) |
-65 (-85) |
-65 (-85) |
|
Surface Tension at 25°C (77°F) |
Dynes/cm |
20.8 |
20.9 |
21.0 |
|
Volatile Content, at 150°C (302°F) |
Per cent |
0.3 |
0.02 |
0.07 |
|
Viscosity Temperature Coefficient |
|
0.59 |
0.60 |
0.60 |
|
Coefficient of Expansion |
cc/cc/°C |
0.00104 |
0.00096 |
0.00096 |
|
Solubility Parameter |
|
7.3 |
7.4 |
7.4 |
|
Solubility in Typical Solvents |
||||
|
Chlorinated Solvents |
|
High |
High |
High |
|
Aromatic Solvents |
|
High |
High |
High |
|
Aliphatic Solvents |
|
High |
High |
High |
|
Dry Alcohols |
|
Poor |
Poor |
Poor |
|
Water |
|
Poor |
Poor |
Poor |
|
Fluorinated Propellants |
|
High |
High |
High |
|
Dielectric Strength at 25°C (77°F) |
volts/mil |
400 |
400 |
400 |
|
Appearance/Odour |
: Liquid Green / Yellow, Pleasant odour |
|
pH |
: 8.5 |
|
Boiling point/boiling range |
: 100 ºC |
|
Melting point |
: Not applicable. |
|
Flammability (solid, gas) |
: Not classified |
|
Explosive properties |
: Not classified |
|
Oxidising properties |
: Not classified |
|
Flash point |
: Not applicable. |
|
Relative density |
: 1 |
|
Water solubility |
: Complete |
|
Evaporation rate |
: No data available |
| Property | ASTM Test Method | UOM | Product Specification |
| Kinematic Viscosity |
D445 |
CST |
≤ 50°C@ 40°C |
| ≤ 8@ 100°C | |||
| Pour Point | D5950 |
°C |
≤ -10 |
| Flash Point (Open Cup) | D 92 |
°C |
≥250 |
| Fire Point | D 92 |
°C |
Can be removed |
|
Auto-Ignition Temperature |
D 2155 |
°C |
≥350 |
| Vapour Pressure | D 2879 | KPa | ≤2.75@ 200°C |
| KPa | 0@ 50°C | ||
| Initial Boiling point | D2887 |
°C |
390 -440 |
| Max.Bulk Temperature |
°C |
≥250 | |
| Max. Film Temperature |
°C |
≥340 | |
| Coefficient of Thermal Expansion | D1250-80 |
1/°C |
<0.0008 for complete operating range (up to 250°C ) |
|
Thermal Conductivity,(k) |
W/M-K | ≥0.12 @200°C | |
|
Specific Heat, (C) |
KJ/KG-°C | ≥2.12 @200°C | |
|
Density, (p) |
KG/M3 | ≥840@15°C | |
|
Oxidation Stability Test |
D943 | Vendor to advise (Note 1,2,3) | |
|
Thermal Stability Test |
D-5800 | Vendor to advise (Note 1,2,3) | |
|
Heat Transfer Parameter @ 200°C |
Calculated | >1.35 x 10-4 |
We are marine chemical supplier since 1996.These Marine Chemicals include different sets of products such as Tank Cleaners, Maintenance Chemicals, Cooling Water Treatment Chemicals, Boiler Water Treatment Chemicals, Fuel Additives, etc.
Oman Chemical is leading one Largest Supplier, Manufacture a
Oman Chemical is leading one Largest Supplier, Manufacture a
