New Products!!
Rx-Sol Marine Chemicals Products Manufacturing Company
Marine Chemicals Products
Fuel Oil Treatment [First] [Prev] 1 | 2
Common name Brand name Active matter
Soot Remover Liquid RXSOL SOOT 7005 A ACTIVE MATTER 78-83%
RXSOL-Soot 7005 A Soot Remover Liquid is formulated for effective prevention of soot and fire scale deposits from boilers and diesel engine exhaust systems

APPLICATION:  : For provides greater fuel efficiency, but also prevents acid formation in areas where severe corrosion could result in expensive damage, i.e. heat exchangers, super heaters, economisers, exhaust paths/stacks

DOSE:  Soot Remover Liquid should be introduced to the boiler through a suitable port, preferably with an injector, ensuring that the liquid is spread through the flame path toward the back of the combustion chamber


PACKAGING: 25 ltrs        View More Details >>
Common name Brand name Active matter
Soot remover - Powder RXSOL SOOT 7005 ACTIVE MATTER 98-100%
RXSOL-SOOT- 7005 is a dry powder compound formulated for safe removal of soot and deposits from boilers and diesel engine exhaust systems

APPLICATION:  If deposits are allowed to form on heat exchangers, the loss of efficiency can be directly related to extra fuel consumption. A 1 mm deposit is approximately equivalent to a 10% efficiency loss, a 3 mm deposit can reduce efficiency by up to 50%. The normal ignition temperature of soot is around 600?C. This means that it is burned only in the hottest parts of the boiler or diesel exhaust systems. Due to the catalytic action of Soot Remover, the ignition temperature of the soot/deposit is reduced to less than 280?C. The carbon deposits are thus ignited, leaving an easily removed ash

DOSE:  : Rxsol Soot 7005 should be introduced to the boiler through a suitable port, preferably with a blower, ensuring that the powder is spread through the flame path towards the back of the combustion chamber


PACKAGING: 25 Kgs,        View More Details >>
Common name Brand name Active matter
Vavecare RXSOL VLV 7006 ACTIVE MATTER 86-88%
RXSOL-VLV- 7006 is specifically intended for treatment and reduction of corrosive deposits formed on exhaust valve seats and turbocharger components

APPLICATION:  For physically modifies fuel ash, raising the sinter and melting points of the ash above the normal engine operating temperatures. Modified ash particles are solid, small and non-adhesive and are ejected with the exhaust gas stream

DOSE:  Typical dose rates vary between 1:1000 and 1:5000 depending on the nature and severity of the problem. For more detail prefer to technical bulletin


PACKAGING: 25 Ltrs        View More Details >>
[First] [Prev] 1 | 2