Categories: Tank Cleaner-20
Images: Alt
Product Short Description: Cold Wash cleaner specialized degreaser and tank cleaner which is safe for common tank metal and epoxy and zinc silcate coating.
Product Description:
Cold clean wash specialized degreaser and tank cleaner which is safe for common tank metal and epoxy and zinc silcate coating. Cold wash is excellent for use as a wash for fuel tankers and heavy mineral oils and fats.  This is a Heavy duty and highly concentrated tank cleaner.
Product Application:

Ready to use for tank cleaning or general degreasing.
Complete removal of dirt, oil, carbonized grease, heavy oil, gum, vegetable oil, Lube oil, soot, asphalt, paraffin, carbon stains etc. Gives clear finish to the surface. Highly effective for the removal of crude and other high melting point stains.

Product Dose:
PROEDURE OF USE :

SPRAY METHOD

Mix 1 part of RXSOL-20-2003-CW  with 2 -10 parts of water / GAS-OIL ( For heavy oil,greasy surface use  directly)Spray directly on the entire surface to be cleaned. This can be achieved by Hand spray / mechanical spray pump. Immediately after 2 -5 minted of spray the RXSOL-20-2003-CW  starts its function. The Dirt, oil grease etc will loosen. 5 to 6 minutes after spraying start rinsing the system with water   (High pressure recommended). Dirt and mud starts vanishing with cleaning media and water                                                                  

Immersion Method             

Application in immersion process with or without ultrasonic support, manual wipping.

RE-circulation Method

RXSOL-20-2003-CW is also used in conjunction with alkaline degreasing bath at 2-10% (v/v) concentration for better and quick degreasing action. Eithers the bath is heated to be 70°Cor the solution can be stirred or air agitated. FINALLY RINSE THE SYSTEM WITH FRESH WATER.
 
Product Note:

Advantages :
RXSOL-20-2003-025 is easily soluble in water Action is quite fast even at low temperature which gives advantages of cleaning under operation And avoid shut down and down time.Non corrosive to most of the metals / plastics. Gives clear finish to the surface .Lower cost due to high concentration

Product Technical Specification:

 

Appearance      Clear amber brown liquid
Density In g/cm3 at 15°C: 0.95b
Flash Point  Above 70°C ( on dilution with water more than 90°C )
Compatibility  
Metal No known effect
Rubber  May swell
Synthetic rubber May swell
PACKAGING  Order No: RXSOL-20-2003-CW Size (in litres): 25,/30,/210
Remarks:

AVOID contact of  RXSOL-20-2003-025 with skin or eye Contact. If contact occurs wash with ample quantity of water. NOTE : on dilution RXSOL-20-2003-025 is more effective and safe for use on epoxy, polyurethane, zinc-silicate coatings and stainless steel.

prod_useful_area:
Cold Wash is one of classified economical emulsifier which makes it Safe to use on most metal surfaces, painted and coated surfaces and also used as a multipurpose degreaser in extremely hard cleaning conditions. Cold Wash is Emulsifying cleaning agent for the removal of medium to by spraying and brushing. Based on aliphatic hydrocarbons, non-ionic and anionic surface active agents. It is the most universally applicable product from the series of emulsifying cleaning agents. Safe for use on common metals, epoxy and zinc silicate coatings.


Chemical for Maintenance of Industrial and Institutional physical plants for handle really tough daily cleaning problems. Can be used as a stripper for all types of waxes and finishes and as a Degreaser where regular cleaners will not perform. Maybe brushed on, sprayed or used in a dip tank. 

Product Supply Location:

Cold clean wash tank cleaner supplier in Chennai - Ennore, Visakhapatnam - Gangavaram, Kolkata - Ennore, Mumbai, Surat - Hazira, Gandhidham Kandla - Mundra, Fujairah - Dubai, Sharjah, Abudhabi, Ajman, Ruwi Barka, Muscat Oman, Sudan, Nairobi Yemen

stock-clearance.png