Categories: Metal Treatment-68
Images: Alt
Product Short Description: Pickling paste Green is used for cleaning and passivating of welding joints and the heat affected zone (HAZ) in welded stainless steel constructions.
Product Description:

Pickling Paste Green is used for cleaning and passivating of welding joints and the heat affected zone (HAZ) in welded stainless steel constructions. It is based on a unique recepie in which the concentration of Weak acid is only about 15% of the level of most pickling products.

Product Application:

Pickling Paste  Green has excellent adhesion and can be applied on vertical surfaces and ceilings without any risk of running or drying. This is due to the paste's gel-like (thixotropic) consistency. Pickling Paste  Green  has a distinctive green color, making it easier to see where it has been applied. RXSOL's pickling paste is economical to use, as only a thin film of the pickling paste is required for perfect result.

Product Dose:
  • The paste is applied with a brush. After pickling and rinsing with water (high pressure) the corrosion resistance is restored in the welded area.
  • The pickling times, which are dependent on temperature, type of steel and welding method vary between 45–240 minutes at room temperature.
  • Working temperature +5 to +40ºC (+41 to +104ºF).
  • Rinsing is done with water (high pressure).
  • The pickling should as far as possible be done indoors in well ventilated rooms at room temperature. At outside work the construction is to be shielded from direct sunlight and rain.
  • There are instructions for use and safety precautions on each pack.
Product Note:

Feature & Benefit

Pickling Paste  Green Compared with conventional pickling pastes, Rxsol ickling paste  Green gives 85% less discharge of dangerous nitrat- and nitriteions to the waste water. This pickling paste releases 80–85% less toxic, nitric fumes during the pickling process and is therefore more operator friendly than other pickling pastes that generate nitrous compounds that are fairly evil-smelling.

Product Technical Specification:
 

Form

:

Viscous, green, gel-like solution with weak odour

Density

:

1.30 kg/l

 Packaging

:

Plastic bottles of 1, 2 or 5 kg

Consumption

:

1 kg  of pickling paste is enough for approximately 120 m (393 ft) of weld bead or a surface of approximately 6 m2 (64.58 ft2)

 


 

Form

:

Viscous, green, gel-like solution with weak odour

Density

:

1.30 kg/l

 Packaging

:

Plastic bottles of 1, 2 or 5 kg

Consumption

:

1 kg  of pickling paste is enough for approximately 120 m (393 ft) of weld bead or a surface of approximately 6 m2 (64.58 ft2)

 

 


 

Form

:

Viscous, green, gel-like solution with weak odour

Density

:

1.30 kg/l

 Packaging

:

Plastic bottles of 1, 2 or 5 kg

Consumption

:

1 kg  of pickling paste is enough for approximately 120 m (393 ft) of weld bead or a surface of approximately 6 m2 (64.58 ft2)

 
Remarks:
prod_useful_area:
Product Supply Location:
stock-clearance.png