OxySafe Oxygen Absorbent 200 CC

Size:

Color:

Product Short Description: Absorbs oxygen to maintain freshness and quality of stored items
Product Technical Specification:

 

Appearance Powder
Colour Black
Odour Odourless
Boiling Point 2730 deg C
Remarks:
Images: Alt


Activated Alumina Claus Catalyst

Size:

Color:

Product Short Description: RXSOL CC 3S Activated Alumina Claus Catalyst is a high surface area activated alumina sphere with tailored pore size distribution to enhance Claus reaction activity through increased diffusion rates and surface activity.
Product Technical Specification:

 

Physical Properties

2-5 mm

3-6 mm

Surface Area m2/g 

375

360

Total Pore Volume cc/g

0.55

0.55

Macroporosity > 750 Å cc/g

0.18

0.15

Crush Strength (5 mesh) kg

14

23

Abrasion Loss, wt %

0.4

0.4

Bulk Density, (kg/m3

641

641

 

Remarks:
Images: Alt


ACID Neutralizer Amine

Size:

Color:

Product Short Description: pH Neutralizer Amine is a colorless to pale yellow, hygroscopic viscous liquid with slight ammoniacal odor. We are supplier and exporter of TEA.
Product Technical Specification:

 PRODUCT NAME  : pH Neutralizer Amine
Odour    : SLIGHTLY AMMONIACAL
Solubility in water    : COMPLETE
Density : 995 kg/m3     at 20    oC
Boiling point    : 360 oC
 Melting point  : 21 oC
 Viscosity          :  
 Flashpoint            : 190 oC
 Explosive limits      : 1.2 -  Vol%
 Vapour pressure       : .03 mbar at 20 oC
 Skin absorption/irritation           : YES
 TLV       Country  NL             Year  1995   :  
Pollution category  1994 : D
 
Remarks:

If RXH is not acid enough to release a proton at alkaline pH, as it is the case with amines, then the reaction has to be carried out in two steps. During the first step the first EO mole is added at acid pH, so that the amine is transformed in ammonium. The reaction produce the mono-, di- and tri-ethanol amines. 

Proton release from ammonium NH4+ → NH3 + H+ (here RX- is NH3) Then, the three condensation reactions: 

 

NH3 + EO → NH2CH2CH2OH (mono-ethanol amine MEA)
NH2CH2CH2OH + EO → NH(CH2CH2OH)2 (di-ethanol amine DEA)
NH-(CH2CH2OH)2 + EO → N(CH2CH2OH)3 (tri-ethanol amine TEA) 

With an alkyl amine, first the alkyl ammoniumion is formed and it is deprotonated: 

RNH3+ → RNH2 + H+ (here RX- is RNH2)
RNH2 + EO → RNH-CH2CH2OH (mono-ethanol alkyl amine)
RNH-CH2CH2OH + EO → RN(CH2CH2OH)2 (di-ethanol alkyl amine) 

Once the ethanol amine is attained, the EO polycondensation is carried out at alkaline pH as previously. In many instance the first ethoxylation is stopped when the monoethanol alkyl amine is formed in order to avoid the polycondensation in more than one chain. 

 PRODUCT NAME  : TRI ETHANOL AMINE 
 CAS number       : 102-71-6
 UN number       :  
 Formula         : (HOC2H4)3N
Odour    : SLIGHTLY AMMONIACAL
Solubility in water    : COMPLETE
Density : 1.13     at 20    oC
Boiling point    : 360 oC
 Melting point  : 21 oC
  Viscosity          :  
 Flashpoint            : 190 oC
 Explosive limits      : 1.2 - ? Vol%
 Vapour pressure       : .03 mbar at 20 oC
 Skin absorption/irritation           : YES
 TLV       Country  NL             Year  1995   :  
 Pollution category    1994      : D
 
Images: Alt
Get MSDS
Get Technical Bulletin
Connect On Whats App


pH Neutralizer Amine

Size:

Color:

Product Short Description: pH Neutralizer Amine is a colorless to pale yellow, hygroscopic viscous liquid with slight ammoniacal odor. We are supplier and exporter of TEA.
Product Technical Specification:

 PRODUCT NAME  : TRI ETHANOL AMINE 
 CAS number       : 102-71-6
 UN number       :  
 Formula         : (HOC2H4)3N
Odour    : SLIGHTLY AMMONIACAL
Solubility in water    : COMPLETE
Density : 1.13     at 20    oC
Boiling point    : 360 oC
 Melting point  : 21 oC
 Viscosity          :  
 Flashpoint            : 190 oC
 Explosive limits      : 1.2 -  Vol%
 Vapour pressure       : .03 mbar at 20 oC
 Skin absorption/irritation           : YES
 TLV       Country  NL             Year  1995   :  
Pollution category  1994 : D
 
Remarks:

If RXH is not acid enough to release a proton at alkaline pH, as it is the case with amines, then the reaction has to be carried out in two steps. During the first step the first EO mole is added at acid pH, so that the amine is transformed in ammonium. The reaction produce the mono-, di- and tri-ethanol amines. 

Proton release from ammonium NH4+ → NH3 + H+ (here RX- is NH3) Then, the three condensation reactions: 

 

NH3 + EO → NH2CH2CH2OH (mono-ethanol amine MEA)
NH2CH2CH2OH + EO → NH(CH2CH2OH)2 (di-ethanol amine DEA)
NH-(CH2CH2OH)2 + EO → N(CH2CH2OH)3 (tri-ethanol amine TEA) 

With an alkyl amine, first the alkyl ammoniumion is formed and it is deprotonated: 

RNH3+ → RNH2 + H+ (here RX- is RNH2)
RNH2 + EO → RNH-CH2CH2OH (mono-ethanol alkyl amine)
RNH-CH2CH2OH + EO → RN(CH2CH2OH)2 (di-ethanol alkyl amine) 

Once the ethanol amine is attained, the EO polycondensation is carried out at alkaline pH as previously. In many instance the first ethoxylation is stopped when the monoethanol alkyl amine is formed in order to avoid the polycondensation in more than one chain. 

 PRODUCT NAME  : TRI ETHANOL AMINE 
 CAS number       : 102-71-6
 UN number       :  
 Formula         : (HOC2H4)3N
Odour    : SLIGHTLY AMMONIACAL
Solubility in water    : COMPLETE
Density : 1.13     at 20    oC
Boiling point    : 360 oC
 Melting point  : 21 oC
  Viscosity          :  
 Flashpoint            : 190 oC
 Explosive limits      : 1.2 - ? Vol%
 Vapour pressure       : .03 mbar at 20 oC
 Skin absorption/irritation           : YES
 TLV       Country  NL             Year  1995   :  
 Pollution category    1994      : D
 
Images: Alt
Get MSDS
Get Technical Bulletin
Connect On Whats App


Silica Gel Orange to White

Size:

Color:

Product Short Description: Orange Silica Gel helps to detect humidity of transformer oil by changing its colour, Humidity is main causes of fluctuation of DIELECTRIC STRENGTH
Product Technical Specification:

 

TECHNICAL SPECIFICATION Of  ORANGE SILICA GEL 

DESCRIPTIONS

SILICA GEL ORANGE  BEADS

Assay (as SiO2)

98 %

pH

4-6
Melting point 1610oC
Boiling Point 2230oc

Bulk Density gm/ltr

0.670 – 0.780
Density  2.6

Loss on Drying %

4 - 6 %

Loss on Attrition

2.5 % Max

Adsorption Capacity at 100 % humidity

35 - 40 %

Friability

99.5

Chloride (as Nacl)

Max. 0.5% ppm

Sulfates (as Na2SO4)

Max 0.5 % ppm

Cobalt Chloride (as CaCl2)

0.5 – 0.7 %

Ammonium Compound (as NH3)

0 %

Binder as CaSO4

0 %

Dimethyl Fumrate (DMF)

0 %

Particle size

4 - 6

 

COLOUR CHANGE 

RH =20 %

RH =50 %

RH = 100 %



ORANGE

PALE ORANGE

ALMOST COLORLESS

 

Remarks:

Silica Gel Details
CAS No. : 112926-00-8
Chemical Name : Silica gel
CBNumber : CB1199389
Molecular Formula : O2Si
Formula Weight : 60.08

Images: Alt
Get MSDS
Get Technical Bulletin
Connect On Whats App


Aromatic Essential Oil

Size:

Color:

Product Short Description: Aromatic Essential Oil
Product Technical Specification:
Essential oils are highly concentrated liquids that can be harmful if not used carefully. By treating essential oils as medicines and following the steps outlined below, you will be well on your way to safely enjoying the many benefits that aromatherapy can offer.

These safety guidelines are not a complete safety reference for the proper use of essential oils. When in doubt, consult your physician and/or a qualified and trained aromatherapy practitioner.

Do not use undiluted essential oils on the skin. Some oils can cause sensitization or allergic reactions in some individuals. When using a new oil for the first time, do a skin patch on a small area of skin. Place a small amount of the diluted essential oil on the inside of your elbow and apply a bandage. Wait 24 hours to see if there is any form of reaction. Some essential oils should be avoided during pregnancy or by those suffering from asthma, epilepsy, or with other health conditions.

When using essential oils, use the smallest amount of essential oils that will get the job done. Do not use two drops, if the job is done from one drop. Not all essential oils are suitable for use in aromatherapy. Keep essential oils away from the reach of children. Keep them out of the way of fire hazards.

Essential oils should not be taken internally and should only be taken internally after receiving a detailed consultation and prescription from a trained and qualified aromatherapy practitioner.
Remarks:
Images: Alt
Get MSDS
Get Technical Bulletin
Connect On Whats App


Type C Silica Gel

Size:

Color:

Product Short Description: C-Type Silica Gel is also known as macro-pored a SILICA GEL. available in Spherical/Beads and Irregular/Crystal shape.
Product Technical Specification:

SPECIFICATION FOR TYPE C SILICA GEL:

Loss on drying : Not more that 5% mass
Absorption Capacity : 27% min on the basis of mass
PH : 3.5 to 8.
Chlorides : 0.05% by mass max
Cobalt (as CoCl2) : 0.4 by mass max
Ammonium compounds (as NaH3): 0.5% by mass max
Sulphates (Na2SO4) : 0.5% by mass max
Industrial Packing: 25 / 50 kgs M S drum (Smaller packing available).
 

Characteristics :

Color Grey
Purity 99%
Form Crystal
Packaging Type HDPE Bag
Density 700 kg/m³
Molar Mass 60.08 g/mol
Remarks:
Images: Alt
Get MSDS
Get Technical Bulletin
Connect On Whats App


Type B Silica Gel

Size:

Color:

Product Short Description: B type silicagel Used for moisture control and Adsorbs water vapor at high humidity and releases it at low humidity
Product Technical Specification:

SPECIFICATION FOR TYPEB SILICA GEL:

Loss on drying : Not more that 5% mass
Absorption Capacity : 27% min on the basis of mass
PH : 3.5 to 8.
Chlorides : 0.05% by mass max
Cobalt (as CoCl2) : 0.4 by mass max
Ammonium compounds (as NaH3): 0.5% by mass max
Sulphates (Na2SO4) : 0.5% by mass max
Industrial Packing: 25 / 50 kgs M S drum (Smaller packing available).
 

Characteristics :

Material Natural Quartz
Color Multicolor
Purity 99%
Feature Premium Quality, Safe Packaging
Packaging Bag
Form Crystal
 
Remarks:
Images: Alt
Get MSDS
Get Technical Bulletin
Connect On Whats App


Type A Silica Gel

Size:

Color:

Product Short Description: A-Type Silica Gel contains fine pores & has large internal surface area. Having high moisture-absorbing capacity at low humidity, our A-Type Silica Gel is used as a desiccant for storing food and metal parts
Product Technical Specification:

SPECIFICATION FOR SILICA GEL INDICATING (BLUE) / NON INDICATING (WHITE):

Loss on drying : Not more that 5% mass
Absorption Capacity : 27% min on the basis of mass
PH : 3.5 to 8.
Chlorides : 0.05% by mass max
Cobalt (as CoCl2) : 0.4 by mass max
Ammonium compounds (as NaH3): 0.5% by mass max
Sulphates (Na2SO4) : 0.5% by mass max
Industrial Packing: 25 / 50 kgs M S drum (Smaller packing available).
 

Characteristics :

Color Grey
Purity 99%
Feature Premium Quality, Safe Packaging
Packaging Bag
Form Crystal
Sachet Pack Size 1-10kg
Remarks:
Images: Alt
Get MSDS
Get Technical Bulletin
Connect On Whats App


Silica Gel Blue Beads

Size:

Color:

Product Short Description: When free from moisture the Granules or beads are dark blue in color. As the beads takes up moisture, they turns to light blue gradually they turn pink.
Product Technical Specification:

 

TECHNICAL SPECIFICATION

DESCRIPTIONS

SILICA GEL BLUE

Assay (as SiO2)

98 %

pH

6.8 - 7.2
Melting point 1610oC
Boiling Point 2230oc

Bulk Density gm/ltr

0.600 – 0.700
Density  2.6

Loss on Drying %

4 - 6 %

Loss on Attrition

2.5 % Max

Adsorption Capacity at 100 % humidity

35 - 40 %

Friability

99.5

Chloride (as Nacl)

Max. 0.5% ppm

Sulfates (as Na2SO4)

Max 0.5 % ppm

Cobalt Chloride (as CaCl2)

0.5 – 0.7 %

Ammonium Compound (as NH3)

0 %

Binder as CaSO4

0 %

Dimethyl Fumrate (DMF)

0 %

Particle size

4 - 6

 
Remarks:

Silica Gel Details
CAS No. : 112926-00-8
Chemical Name : Silica gel
CBNumber : CB1199389
Molecular Formula : O2Si
Formula Weight : 60.08

Images: Alt
stock-clearance.png