Categories: Clean Air deodorizer-24
Images: Alt
Product Short Description: Activated Carbon Commercial Grade
Product Description:
Activated Carbon manufacturer, supplier And one of major exporter from INDIA to Middle East. Our distribution network supplying Activated carbon Powder to various industries which includes Oil, Chemical, and Water Purification industries.
 
Our Activated Carbon Powder is used in liquid phase application primarily for removal of undesired color, smell and other impurities in edible and non edible oil.   We provide bulk and loose quantities of Activated Carbon Powder at market leading prices. 
Product Application:

Our Activated Carbon Powder is used in liquid phase application primarily for removal of undesired color, smell and other impurities in edible and non edible oil.

Product Dose:

Traditionally, active carbons are made in particulate form as powders or fine granules less than 1.0 mm in size with an average diameter between 0.15 and 0.25 mm. Thus, they present a large surface to volume ratio with a small diffusion distance. PAC is made up of crushed or ground carbon particles, 95–100% of which will pass through a designated mesh sieve.

Product Note:
Packaging Details:
Packing :- Triplicate Packing 
 
1) First bags is without laminated 
 
2) Heavy Liner
 
3) Last packing in laminated bags
 
( All bags are fresh)

DETERMINATION OF M.B. VALUE OF ACTIVATED CARBON REAGENT: 

Methylene Blue Solution – Dissolve 0.15 gram of methylene blue confirming to IS: 2230-1962 in 100 ml of Distilled Water (Distilled water having pH value 7.0). PROCEDURE : Weigh accurately about 0.1 gram of the material, as received, with accuracy of 0.01 gram and transfer to 50 ML Glass stoppered flask. Add from a burette 10 ml of methylene blue solution and shake for 5 minutes. After the first 10 ml are decolorized continue to add methylene blue solution (1 ml at a time) till the blue colour disappears for 5 minutes. Decolorizing power of Activated Carbon is expressed in terms of milligrams of methylene blue adsorbed by 1 gram of activated carbon. (This value is MB value).

CALCULATION :

DECOLOURIZING POWER = 15 x V  Divided by 10 x M

 Where V = volume in ml of methylene blue solution consumed, and M = mass in gram of the material taken for the test. (Use methylene blue of any standard company to prepare solution and compare solution with standard solution of methylene blue as it does vary batch to batch).   
Product Technical Specification:
- MB Value : 90 to 110 MB (Mg/gm)
- 200 # mesh Passing : 90-95%
- Moisture : 3% - 5 %
- Ph Value : 9% to 10%
Remarks:
prod_useful_area:
Product Supply Location:
stock-clearance.png