Categories: Degreaser-10
Images: Alt
Product Short Description: APPEARANCE Pale yellow clear liquid Compatible with oily water separators.
Product Description:

A concentrated oil and grease solvent and emulsifier. Penetrates, dissolves and flushes away dirt from machinery, floors and equipment.  Emulsion Degreaser will not flash ignite below its boiling point (210 degrees F.) and is self exinguishing.

Product Application:

Spray or mop Emulsion Degreaser over surface to be cleaned. If grease buildup is thick, score with a wire brush and mix with cleaner. Allow Emulsion Degreaser to stand for 10 minutes then hose off with water, preferably a pressure washer type system. Emulsion Degreaser can be used as a presoak or pretreat prior to cleaning with steam. For milder soils Emulsion Degreaser can be diluted with 10 parts of water. At this dilution can be used in tanks or for swabbing off surfaces. Emulsion Degreaser can be used safely on ferrous metals and is excellent for degreasing concrete floors prior to painting. It can also be used on engine blocks, chassis, machinery and shop floors. 

Product Dose:
Product Note:

Material Safety

Avoid contact with skin and eyes. For contact with skin, flush with water. For contact with eyes, flush with water for 15 minutes and seek medical attention. If swallowed drink two glass of water and induce vomiting. Seek immediate medical attention. After vomiting, give water, milk or solution of sodium bichromate in water (1 teaspoon per quart). Do not give anything to an unconscious or convulsing person. Caution, contains heavy aromatic naphtha.

Product Technical Specification:

Technical Information

Appearance: White Viscous   Solubility: Excellent
Density: > 1   pH Level: Neutral
Odor: Sweet Smell   Foaming: Low
Flash Point: None To Boiling Point   Stability: Stable
 
Remarks:
prod_useful_area:
Product Supply Location:
stock-clearance.png