Cationic Polyacrylamide Flocculant

Size:

Color:

Product Short Description: Polyacrylamide Flocculant to be used as flocculant in direct filtration process for settling of inorganic suspended solids, effluent water.
Product Technical Specification:
Remarks:
Images: Alt



Partial Hydrolyzed Polyacrylamide PHPA

Size:

Color:

Product Short Description: Is a co polymer of anionic character and high molecular weight
Product Technical Specification:
Remarks:
Images: Alt



Potassium Alum

Size:

Color:

Product Short Description: Potassium alum is commonly used in water purification, Leather Tanning, Dyeing, Fireproof Textiles, and Baking Powder.
Product Technical Specification:
Molar Mass 258.192 g/mol (anhydrous)

474.37 g/mol (dodecahydrate)

Density 1.725 g/cm3
Melting Point 92 to 95 °C (198 to 203 °F; 365 to 368 K)
Boiling Point 200 °C (392 °F; 473 K)

 

Test Specification Result
Appearance (Color) White White
Appearance (Form) Powder Powder
Solubility (Color) Colorless Colorless
Solubility (Turbidity)
0.5M, H2O
Clear to Slightly Hazy Clear
Calcium (Ca) _< 0.0005 % < 0.0005 %
Copper (Cu) _< 0.0005 % < 0.0005 %
Iron (Fe) _< 0.001 % 0.001 %
Magnesium (Mg) _< 0.005 % < 0.005 %
Sodium (Na) _< 0.02 % < 0.02 %
Phosphorus (P) _< 0.0005 % < 0.0005 %
Lead (Pb) _< 0.001 % < 0.001 %
Zinc (Zn) _< 0.0005 % < 0.0005 %
Chloride (Cl)
< or = 0.0005%
Pass Pass
Insoluble Matter _< 0.005 % 0.002 %
Ammonia (NH4)  _< 0.005 % 0.002 %
Purity by Titration
by EDTA
_> 98.0 % 99.8 %

 

 

Form         Liquid
Colour Dark brown
Odour Hydrocarbon-like.
Odor Threshold No Information Available
pH Not Applicable
Melting Point < -40 °F (< -40 °C)
Boiling Point 348.8 °F (176 °C)
Flash Point 150.1 °F (65.6 °C) Pensky-Martens Closed Cup
Evaporation Rate  < 1 (Ether =1)
Flammability (solid, gas) Not Applicable
Explosive limits Lower / Uper Not Available
Vapour pressure  < 5 mm Hg @ 21°C
Vapour Density > 1 (Air =1)
Secific Gravity 1.42
Decomposition Temperature No information available
Partition coefficient No data available
Autoignition Temperature No data available
Solubility in Water Not Soluble
Viscosity  < 400 cSt @ 60°F
Explosive properties
Remarks:
Images: Alt
Get MSDS
Get Technical Bulletin
Connect On Whats App



Polyacrylate Dispersant

Size:

Color:

Product Short Description: Low and narrow molecular weight polyacrylate having a sodium cation.
Product Technical Specification:
Remarks:
Images: Alt
Get MSDS
Get Technical Bulletin
Connect On Whats App



Seawater Dispersant SWD

Size:

Color:

Product Short Description: Seawater dispersant is a highly effective dispersant for keeping seawater cooling system free from marine fouling. Keeping seawater cooling systems free from microbiological bacteria and fungi or macro biological.
Product Technical Specification:
TYPICAL PHYSICAL PROPERTIES
Appearance:                             Clear, water-white liquid
Odor:                                          Fresh, pleasant odor
Specific Gravity @25°C:          0.989
Flash Point (PMCC):                None
pH:                                              7.0 - 8.5
Water Solubility:                        Complete in all proportions
Remarks:
PACKAGING
Seawater dispersant is available in 25-liter containers (PCN 5148409).For vessels which operate continuously in coastal waters,
we recommend dosing every three days. For all oceangoing vessels, we recommend dosing every two days while in coastal waters and at a minimum dose of once a week when not.  Seawater dispersant should not be fed to a system while the seawater is being drawn as makeup for an evaporator or water maker. Either isolate the evaporator or shut it down while Seawater dispersant is being dosed and for at least 30 minutes afterward.
Images: Alt
Get MSDS
Get Technical Bulletin
Connect On Whats App



SODIUM SULPHIDE solution

Size:

Color:

Product Short Description: Colourless water-soluble salts that give strongly alkaline solutions
Product Technical Specification:
Remarks:
  • Used as Depilatory reagent and in pharmaceutical Industries.
  • Used in obtaining the sulphur Black Dyes.
  • Used in Ore Floatation.
  • Used in Engraving and also used as analytical reagent.
  • Used for removing sulphur in viscous Rayon Industry.
  • Used in Industries to remove heavy metals from waste water.
  • Used in the manufacture of lubricating oils.
  • Used in the production of polysulphide elastomers.
  • Used in Synthetic cooking liquor.
Images: Alt
Get MSDS
Get Technical Bulletin
Connect On Whats App



FORMIC ACID

Size:

Color:

Product Short Description: Formic acid use as a preservative, antibacterial agent, cleaning agent and coagulant in rubber industries.
Product Technical Specification:

 

 PRODUCT NAME  : FORMICACID  
 CAS number     : 64-18-6
 UN number   : 1779
 Formula    : HCOOH
 Odour   : PENETRATING
 Solubility in water   : COMPLETE
 Density           :  1.22     at 20 oC
 Boiling point  : 101oC
 Melting point  : 8 oC
 Viscosity   : 1.80 cp at 20oC
 Flashpoint  : 42oC
 Explosive limits     : 10 – 45.5 Vol%
 Vapour pressure    : 42 mbar at 20oC
 Skin absorption/irritation    : YES
 TLV       Country  NL             Year  1995   : 5 ppm                    9          mg/m3
 Pollution category    1994 : D

 

Remarks:
Images: Alt
Get MSDS
Get Technical Bulletin
Connect On Whats App



BTC Zyme

Size:

Color:

Product Short Description: Zyme BTC is a unique biological active liquid formulation containing specialized bacterial strains, biodegradable low foaming chemical cleaners and anti foam agents.
Product Technical Specification:

APPEARANCE

Green liquid

pH, in conc.

9

DENSITY, in g/cm3 at 15°C

1.0

COMPATIBILITY

 

Metal

No known effect

Rubber

No known effect

Synthetic rubber

No known effect

Remarks:
Images: Alt
Get MSDS
Get Technical Bulletin
Connect On Whats App



ANTI SCALANT for WASTE WATER

Size:

Color:

Product Short Description: ANTI-SCALANT FOR WASTEWATER TREATMENT SYSTEMS - SLUDGE LINE APPLICATION PHOSPHONATE-BASED
Product Technical Specification:

 

Appearance : Clear, dark yellow liquid
Density : 1.14 – 1.16 g/cm3
Viscosity : Approx. 50 mPa.s
pH-value : 4.8 – 5.3
Boiling Point : 105° C
Freezing Point : -10° C
Solubility in water : unlimited
Remarks:
Images: Alt
Get MSDS
Get Technical Bulletin
Connect On Whats App



Potassium Permanganate Crystals Technical Grade

Size:

Color:

Product Short Description: Potassium Permagnate Also known as KMnO4, Condy’s Crystals and permanganate of potash
Product Technical Specification:

 

Odour : Odourless
Taste : Sweetish, astringent.
Appereance : Solid/Powder/Crystal
Molecular Weight : 158.03 g/mole
pH (1% soln/water) : Not available
Boiling Point : Not available
Melting Point : Decomposes.
 Critical Temperature : Not available.
Specific Gravity : 2.7 @ 15 C (Water = 1)
Solubility : Easily soluble in methanol, acetone. Partially soluble in cold water, hot water. Soluble in Sulfuric Acid.
 

Drinking Water treatment with Potassium Permagnate ::: http://www.dubichem.com/Drinking-Water-treatment-with-Potassium-Permagnate

Remarks:

Proceed with caution, however. The information provided in this article is intended for emergency situations only. Caution should be exercised when using any of the following information.

Potassium permanganate will start a fire when mixed with a couple of different compounds. Glycerin is the most common, but antifreeze will also do the trick. Antifreeze seems to create a reaction that is a little more violent. Be very careful when using either. The reaction is not always immediate. It can take several seconds for the reaction to start a fire – let it be.

After gathering all the necessary fire tinder and large pieces of wood to keep your fire going, place a teaspoon of Potassium permanganate on a flat surface. Carefully add the same amount of Glycerine or Antifreeze evenly on top of your pile. Next, stand back a couple of feet and wait at the ready with your tinder.

Mix sugar in with the Glycerin before adding to your Condy’s Crystals, and you’ll get a decent signal smoke.

For water purification, its use is relatively straight forward. First, if there is any sediment in the water, strain it out. Then add 3 – 4 crystals per liter of water. Stir or shake for a few seconds then let sit for 2 hours. The water should be a light pink (a concentration of 1:10,000) – no darker.

Here are some proportions for killing the different nasty organisms that can find their way into water:

Bacteria requires a minimum of 2.5mg per liter of water.
Viruses require a minimum of 50mg (close to danger levels) per liter.

Potassium permanganate can become toxic in high concentrations, just like anything. The lowest recorded instance of a person poisoned was 100mg per kilogram of body weight. That said, the LD50 scale for Potassium permanganate is 1900mg per kilogram of body weight.

Just remember, as long as it is pink – it’s probably ok to drink.

To use as an antiseptic, anti-fungal treatment, or emergency snow signal, add crystals one by one until the solution turns purple. Shake and use to flush out a wound, soak a fungal infection, or to leave a message in the snow.

Don’t eat snow marked in yellow – just saying.

Ideally, Potassium permanganate should be stored in a nonreactive plastic bottle with a Teflon coated cap. Most plastic bottles and non-coated caps should be fine.

Potassium permanganate is not a perfect option for any of the above-listed purposes. If other more convention options are available  – use them first. What it does do is offer another option should you find yourself with it as your only resource.

Images: Alt
stock-clearance.png