Powder Chemical-98 | Marine Chemicals,Tank Cleaning Chemicals,Water Chemicals Products,Cooling Water Treatment Chemicals

Potassium Persulphate

Product Short Description: It is a white solid that is sparingly soluble in cold water but dissolves better in warm water.

Product Technical Specification:

Properties :

Appearance	White, finely crystalline salt
KPS (PPS) content (typically)	99.0 % w/w
Active oxygen (typically)	5.9 % w/w
Acid content (based on H2SO4,typically)	0.05 %
Iron content (typically)	1 mg/kg
Bulk density (typically)	1100 g/l
Melting point	Decomposition At above 65 °C
Solubility in water at 10/20/40/60°C	30/50/105/210 g/l
pH of a 1% solution in water (typically)	3.7
pH of a 10% solution in water (typically)	3.1
Recommended storage temperature	Below 30 °C
Moisture content (typically)%	< 0.03
Molecular Weight	270.3 kg/kmol
Specific Gravity	2,480 kg/m³

Remarks:

Images:

SODIUM PERSULPHATE

Product Short Description: Sodium Persulfate is a white crystalline powder. It is used as a bleaching agent for fats, textiles and hair, a battery depolarizer, and in emulsion polymerization.

Product Technical Specification:

Remarks:

Images:

BARIUM CARBONATE

Product Short Description: Barium carbonate has the empirical formula CBaO3 and a molecular weight of 197.37. It is a tasteless, odorless, heavy white powder with a density of 4.2865. At about 1300°C it decomposes into BaO and CO2. Its vapor pressure is negligible.

Product Technical Specification:

Physical state at 20 °C :	Solid
Odour threshold :	No data available
pH value :	Not applicable.
Melting point [°C] :	811°C
Decomposition point [°C] :	1300°C
Critical temperature [°C] :	N/A
Auto-ignition temperature [°C] :	N/A
Flammability (solid, gas) :	N/A
Flash point [°C] :	N/A
Boiling point [°C] :	N/A
Initial boiling point [°C] :	N/A
Final boiling point [°C] :	N/A
Evaporation rate :	N/A
Vapour pressure [20°C] :	N/A
Vapour pressure mm/Hg :	N/A
Vapour density :	N/A
Density [g/cm3] :	4,43
Relative density, gas (air=1) :	N/A
Relative density, liquid (water=1) :	N/A
Solubility in water [% weight] :	Slightly soluble
Solubility in water :	N/A
Log Pow octanol / water at 20°C :	No data available.
Solubility :	N/A
Viscosity at 40°C [mm2/s] :	N/A
Explosive properties :	N/A
Explosion limits - upper [%] :	N/A
Explosion limits - lower [%] : N/A	N/A
Oxidising properties :	No data available.

Remarks:

Barium may cause constipation or impacted stool after the swallowing test if it isn't completely cleared from your body. You can manage constipation by drinking plenty of fluids and eating foods high in fiber to help the rest of the barium leave your body.

Images:

Phosphorous Acid

Product Short Description: Phosphorous acid is a chemical substance that is used to make other phosphorus compounds.Phosphorous acid appears as a white or yellow crystalline solid (melting point 70.1 deg C) or a solution of the solid. Density 1.651 g /cm3 . Contact may severely irritate skin, eyes, and mucous membranes. Toxic

Product Technical Specification:

Particular	Result
Appearance (Color)	: White to pale cream
Form	: Flakes or crystals or crystalline powder or powder
Assay	: ≥98.0 to ≤102.0%
Formula	: H3PO3
Molecular Weight	: 82
Melting point	: 74°C
Density	: 1.651
Boiling Point	: 200° C
pH	: 1.0

Remarks:

GHS Hazard and Precautionary Statements

Hazard Statements: H290-H302-H314

May be corrosive to metals. Harmful if swallowed. Causes severe skin burns and eye damage.

Precautionary Statements: P264b-P270-P271-P280-P304+P340-P305+P351+P338-P310-P330-P331-P363-P390-P402-P403+P233-P406b-P501c

Wash face, hands and any exposed skin thoroughly after handling Do not eat, drink or smoke when using this product. Use only outdoors or in a well-ventilated area. Wear protective gloves/protective clothing/eye protection/face protection. IF INHALED: Remove to fresh air and keep at rest in a position comfortable for breathing. IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing. Immediately call a POISON CENTER or doctor/physician. Rinse mouth. Do NOT induce vomiting. Wash contaminated clothing before reuse. Absorb spillage to prevent material damage. Store in a dry place. Store in a well-ventilated place. Keep container tightly closed. Store in corrosive resistant polypropylene container with a resistant inliner Dispose of contents/ container to an approved waste disposal plant

Images:

Crystal Glass Etching Acid

Product Short Description: Crystal Glass Etching Acid is the best glass etching chemical for glass work

Product Technical Specification:

Boiling point‎: ‎240 °C (464 °F; 513 K)
EC Number‎: ‎215-676-4

Crystal Glass Etching Acid

Melting point :124.6°C (Sublimes at higher temperature)

Boiling point : 239.5°C
When dissolved in water, cooling takes place. Material is Hygroscopic at 50% humidity.

Analysis

Appearance : White crystalline solid (Orthorhombic crystals)

NH4HF2 : 98.76%*
(NH4)2SO4 : 0.05%
(NH4)2SiF6 :0.20%
Moisture :0.59%

Solubility in water : 60.2 g at 20°C and 156.4g at 60°C per 100ml of water
Solubility in HCl : 10% (w/v) sample is soluble in 15% (w/w) of HCl at 25°C

*Assay: Weigh accurately about 1.0gm of Crystal Glass Etching Acidsample. Dissolve it in 100ml distilled water. Titrate with about 1N NaOH. Use Phenolphthalein as indicator. End point is Colourless to Pink.

% acidity as HF = A / B

1st calculate Consumption of NaOH, B.R. X Normality of NaOH X 0.02 X 100 = A
Then Divided the result with " Weight of the sample " = B

%NH4HF= %acidityasHFx57 / 20

Remarks:

Crystal Glass Etching Acid is a white crystal salt chemically when Crystal Acid comes in contact with water resulting with the formation of HF. It is used to brighten aluminum and other metals.

Images:

Heat Transfer Salt HT 400

Product Short Description: Salt inhibited with the corrosion inhibitor resulting corrosion protection, as well as suitable for High Temperature heat transfer.

Product Technical Specification:

Main Ingredients	:	Salt Mixture with Corrosion Inhibitor
Inhibitors and water 6 Inhibitors	:	6 %
Colour Bright	:	Yellow
Nitrite Content	:	7.5 to 8.5%
Chloride Content	:	0.10% Max.
pH of solution	:	9.5 - 10.5
Odour	:	PRACTICALLY ODOURLESS
Solubility in water	:	SOLUBLE
Working Temp Range	:	> 400 Deg.C
Density @ 20 Deg.C	:	1160 Kg/m3
Reverse Alkalinity	:	Minimm 15.0 ml
Vapour pressure	:	.07 mbar at 20oC
Hear Transfer Salt TR	:	155
Skin absorption/irritation	:	YES
TLV Country	:
Pollution category 1994	:	III

Remarks:

Why use Heat Transfer molten salts?

Heat Transfer Salt extend the upper range of the temperature limits in which a liquid heat transfer media can be used.

Images:

Sodium Lauryl Sulfate Powder

Product Short Description: Sodium lauryl sulfate (SLS) is an anionic surface active agent commonly used in cosmetics.

Product Technical Specification:

CAS NO.	151-21-3
EINECS NO.	205-788-1
FORMULA	CH3(CH2)11OSO3Na
MOL WT.	290 - 310

Appearance	White Powder
Active Matter %	95 Min
pH (1% Aqueous Solution)	8.5 - 10.5
Sodium Sulphate %	4.0 Max
Sodium Chloride %	0 .5 Max
Un-Sulfated Matter %	2.0 Max
Moisture %	2.0 Max

Remarks:

Images:

LiveChat

Search form

Diatomite

Potassium Persulphate

SODIUM PERSULPHATE

BARIUM CARBONATE

Sodium Metal

Potassium Methoxide Powder

Phosphorous Acid

Crystal Glass Etching Acid

Heat Transfer Salt HT 400

Sodium Lauryl Sulfate Powder

RX SOL

LATEST POSTS

Buffer Cleaner

Caustic Soda

Find Us

LiveChat