Oman Chemical is leading one Largest Supplier, Manufacture and Exporter of Tank Cleaner like Fatty Acid Oil Cleaner in Oman, Sultan Qaboos, Qulhat, Shannah, Duqm, Salalah, Sohar, Gulf of Oman,Khatmat Malaha, Suwaiq ,Muscat, Hutchison, Alliwa, Rusayl Industrial Area, Sur, Nizwa and Buraimi Industrial Area.
Fatty Acid Oil Cleaner contains a Strong emulsifier which is specialized for emulsification of Fatty Acid. It is a very strong cleaner, which can be used to soften up / remove baked-on drying oils and also used after animal and vegetable oils, fish oils, tall oils, tung oil etc.This product is an exceptional solvency power on soil & oily matter. It is free from Hydrocarbon solvents, Biodegradable and minimizes the extreme hazards to personnel in handling materials. These are highly acknowledged due to their accurate composition and effectiveness.
Procedure:
Fatty acid oils/fats will react with seawater as well as with untreated fresh water and will format magnesium and calcium soaps (white residues). If possible seawater or untreated freshwater (high water hardness) should not be used for pre-cleaning.
1. Butter worth the tanks 1-1,5 hour with a treated freshwater, which should be prepared in a separate tank. The cleaning temperature should be approx. 20-25 Degree Calcius above the melting point of the product.
      If the use of seawater cannot be avoided Butter worth the tank for 1-1, 5 hour with seawater of a temperature of 10 -150 C above the melting point of the product. After a sufficient pre-cleaning the temperature can be increased to 20-250 C above          the melting point of the product.
2. If seawater was used in STEP 1: Flush the tank 10 minutes with fresh water to remove the residues of seawater.
3. Prepare the following cleaning solution in fresh water:
        0.4% RXSOL CTC-VOLC
        5% RXSOL AL 2005 Butter worth the tank 1.5 hours with the prepared solution by recirculation. The temperature should be approx. 70-80°C.
4. Butter worth the tank for 1 hour with hot seawater (60-800 C)
5. Flush the tank with fresh water Inspect the tank: If white residues are present Butter worth the tank with on of the following solution:
       3-5% Phosphoric acid and 0.4% RXSOL CTC-VOLC ; or
       3-5% Nitric acid and 0.4% RXSOL CTC-VOLC ; or
       2-5% of a metallic brightener RXSOL MB 1011 and 0, 4% RXSOL CTC-VOLC The cleaning temperature should be moderate (50°C.) Use heating coils not the Butter worth heater.
6. Butter worth the tank 0, 5 hours with fresh water.
7. Ventilate, mop and dry the tank.
Available packing Size : 10, 20, 25, 210 Ltrs.
Oman Chemical offers highest quality products in Tank cleaning, Hold Solution, Detergent, Degreaser & Floor care chemical.Our in house lab and QC department is strong in equipment, knowledge and system to meet the international standards. We produce superior range of Fatty Acid Oil Cleaner using advanced manufactured technology and using superior quality raw materials. We assure for quality and ensure that only the best is catered to the customers.Our basic motto of the company is to give a better product to the customer at the lowest rate. We are keeping ready stock of Fatty Acid Oil Cleaner, for more information, any support and price, Feel free to contact us through our Email id theomanchem@gmail.com