RXSOL Altreat 400

Size:

Color:

Product Short Description: RXSOL Altreat 400 also impairs crystal growth, modifying the crystal structure to create a soft sludge byproduct that does not adhere to heat transfer surfaces. During the distillation process, the formation of scale on heat transfer surfaces can significantly reduce heat transfer efficiency and inc
Product Technical Specification:
Technical Specifications:
  • Highly concentrated liquid delivers substantial savings since up to 40% less solution than other polymaleates is required to achieve the same effect.
  • Highly effective, but gentle, solution does not harm the environment or heat exchanger tubes, plates, gaskets or glue.
  • Highly versatile scale inhibitor delivers effective performance while operating in temperatures up to 80ºC.Helps maintain heat transfer rates, thus improving process performance, reducing energy costs and prolonging heat exchanger lifetime.Increases the efficiency and performance of the equipment,reducing total operation and maintenance costs.
  • Recommended operating temperatures: 50°–80°C.

 specification:-

Appearance: Light yellowish / brown liquid
Specific gravity (water=1) 1.03

Viscosity:		 600 mm2/s at 23°C
Flash point: >100°C
pH: Approx. 8 at 20°C
Miscibility with water In all proportions
Remarks:

Scale inhibitor for fresh water generators and desalination plants.

Images: Alt


RXSOL 4000

Size:

Color:

Product Short Description: Corrosion inhibitor is a catalyzed liquid oxygen scavenger , This formulation is especially effective way of protecting ferrous and aluminum metals from corrosion due to adverse environmental conditions such as high heat and humidity, seawater or other
Product Technical Specification:
 
Form                                         Liquid
Colour Colourless to slightly Yellow
Odour Sharp
Flash Point  > 100 degree C
Density 1.05-1.11 g/cm3 (25C)
pH 3 - 7
 

 

Non-Flammable

Safe Plant Handling
Low Odor
Provides corrosion protection in the liquid and the vapor phase
When used in hydrostatic testing the product provides protection in liquids below, above and at the liquid levels. Protection of recessed and hard to reach areas. Complicated valves and the interior surfaces of piping and equipment, which are often difficult or impossible to reach, are protected with true Vapor Corrosion Inhibitor action. Can be applied for hydrotest solution, metalworking fluids, coatings, adhesives and water treatment formulations.


 

Remarks:

Risk of serious damage to eyes. In case of contact with eyes, rinse immediately with plenty of water & seek medical advice.  Wear suitable gloves and eye / face protection

Images: Alt


Diesel Engine LiquiGuard NB

Size:

Color:

Product Short Description: Highly concentrated liquid cooling treatment compound, ferrous & Non ferrous corrosion inhibitors, antiscalants , dispersant and buffer solution of non carbonate.Usefull for use in high or low temperature closed cooling water systems for the prevention of
Product Technical Specification:
Remarks:
Images: Alt
Get MSDS
Get Technical Bulletin
Connect On Whats App


Antifouling Liquid

Size:

Color:

Product Short Description: RXSOL Antifouling Liquid is a liquid, slightly foaming, non-ionic, thermally stable biodisperse that has been developed for use in industrial water supply systems, such as cooling systems, evaporative condenser irrigation systems, hydrostatic sterilizers, autoclaves. Rxsol Antifouling Liquid impro
Product Technical Specification:

Physical Proeprties : 

Appearance : Clear or slightly turbid aqueous solution, colorless or slightly yellow in color
Density (kg / m 3 ) :1020
pH : 8.5 - 12.5
Flash Point : None
Freezing Point : <+ 2 0 C
Solubility in Water : Cpmpletely soluble in water
 
Remarks:
Images: Alt
Get MSDS
Get Technical Bulletin
Connect On Whats App


Corrosion Inhibitor Antifoulant Conc.

Size:

Color:

Product Short Description: Formulated to prevent growth rather than remove existing growth of microorganism bacteria , fungi , larvae etc..
Product Technical Specification:
Remarks:

1 . Avoid to use in any food area / food crop ( FARMING PURPOSE ).
2 . It is strongly recommended to clean entire fouled contaminated system prior to its use . 
3.  IT SHOULD ONLY BE DILUTED WITH FRESH WATER .
4. Causes eye and skin irritation , WORKERS must wear all chemical resistant apron and face mask , long pants , shoes. Strictly avoid contamination  of food items.

Images: Alt
Get MSDS
Get Technical Bulletin
Connect On Whats App


Corrosion Inhibitor Antifoulant Marine Anti Algea Insect Seaweed Barnacles

Size:

Color:

Product Short Description: Gives complete protection against corrosion andfouling by marine growth such as algae, moss, shellfish andmicro-organisms in seawater cooling systems. It is also usedas an effective biocide to treat diesel engine cooling watersystems against micro-organis
Product Technical Specification:
Remarks:

1 . Avoid to use in any food area / food crop ( FARMING PURPOSE ).
2 . It is strongly recommended to clean entire fouled contaminated system prior to its use . 
3.  IT SHOULD ONLY BE DILUTED WITH FRESH WATER .
4. Causes eye and skin irritation , WORKERS must wear all chemical resistant apron and face mask , long pants , shoes. Strictly avoid contamination  of food items.

Images: Alt
Get MSDS
Get Technical Bulletin
Connect On Whats App


ENGINE SCALE Guard NB

Size:

Color:

Product Short Description: Diesel Engine Scale Guard NB engine water treatment chemicals with unique formulation of organic corrosion inhibitors and anti-scalants for use in closed cooling water systems.
Product Technical Specification:
Remarks:
Images: Alt
Get MSDS
Get Technical Bulletin
Connect On Whats App


Corrosion Scale Inhibitor for Open Closed Cooling systems ECO

Size:

Color:

Product Short Description: Scale and corrosion inhibitors for open recirculating cooling water systems
Product Technical Specification:
Remarks:

Features of Corrosion Scale Inhibitor which can be used for both Open and Closed Cooling Systems

  • Corrosion Scale Inhibitor for Open Closed Cooling systems ECO is a very efficient dispersant for hardness-salts and metallic-oxides.

  • Corrosion Scale Inhibitor for Open Closed Cooling systems ECO is also a very efficient corrosion-inhibitor.

  • Corrosion Scale Inhibitor for Open Closed Cooling systems ECO contains sequestrants, anionic polymers and wetting-agents.

  • Corrosion Scale Inhibitor for Open Closed Cooling systems ECO has been developed to avoid or remove deposits composed of calcium carbonate, calcium sulphate, magnesium hydroxide, iron oxide, insoluble phosphates and silicates.

  • Corrosion Scale Inhibitor for Open Closed Cooling systems ECO may be applied in closed, open and once-through cooling-water systems, desalinisation plants, phosphoric acid plant and all other systems where above mentioned deposits will occur.

Images: Alt
Get MSDS
Get Technical Bulletin
Connect On Whats App


Corroision Inhibitor for Closed Chilled Systems Concentrate

Size:

Color:

Product Short Description: Multi-functional, nitrite-based chemical treatment used for the control of corrosion in closed cooling systems and chilled water systems RXSOL-40-4021 is a high performance nitrite based closed circuit inhibitor with indicator
Product Technical Specification:

Appearance

Light yellow liquid

Specific Gravity at 25° C (77° F)

1.3

Flash Point (PMCC)

None

pH, Neat

 >10

Freeze Point:

-12.2° C (10° F)

Freeze/Thaw Stability

Complete
Remarks:
Images: Alt
Get MSDS
Get Technical Bulletin
Connect On Whats App


Corrosion Inhibitor Antifoulant for Aluminium cooling system

Size:

Color:

Product Short Description: Superior corrosion inhibitor developed for use in closed water circulating systems containing aluminium
Product Technical Specification:
Remarks:
Images: Alt
stock-clearance.png