Fuel Treatment-70 | Marine Chemicals,Tank Cleaning Chemicals,Water Chemicals Products,Cooling Water Treatment Chemicals

Fuel M15 RXSOL

Product Short Description: Blend of 15 % methanol and 85 % Gasoline.

Product Technical Specification:

Appearance :: Water white to Light yellow transparent liquid

Density g/cm3 (20 ℃) :: 0.760～0.770

Actual colloids mg/100 ML :: ≤ 5

Copper strip corrosion(50 ℃, 3h) :: 1a

Water content %(volume fraction) :: ≤ 0.20

≤ 0.01Appearance

water white to light yellow transparent liquid

Density g/cm3 (20 ℃)

0.760～0.770

Actual colloids mg/100 ML

≤ 5

Copper strip corrosion(50 ℃, 3h)

Water content %(volume fraction)

≤ 0.20

Mechanical impurities%

≤ 0.01

Remarks:

Hashtag: #MarineChemical #TankCleaner #OilFieldChemical #ChemicalManufacturer #ChemicalSupplier #WaterTreatmentChemical #ROchemicals #ReverseOsmosisChemical #Dispersant #Demulsifier #WaterlessHandCleaner #AirC

Images:

Hydrazine Hydrate 24

Product Short Description: Hydrazine Hydrate Amine 24 Percent customized packing

Product Technical Specification:

HYDRAZINE HYDRATE
Test	Results
Appearance	Colourless and clear
Sulfate : as SO4	0.0001% max.
Chloride : as Cl	0.0001% max.
Iron : as Fe	0.00005% max.
Heavy metals : as Pb	0.0001% max.
Non volatile matter	0.005% max.
N2H4.2H2O	24.5% W/W

Remarks:

Linear Formula: H4N2 · 2H2O

For water Treatment, Hydrazine Hydrate GRADE :

Concentration : 24-28 %

Physical state at 20 °C : Liquid.

Colour : Clear Colorless

Odour : Ammonia like

Odour threshold : No data available.

pH value : No data available.

Melting point [°C] : -570C

Decomposition point [°C] : N/A

Critical temperature [°C] : N/A

Auto-ignition temperature [°C] : 310 °C

Flammability (solid, gas) : N/A

Flash point [°C] : NA

Boiling point [°C] : 1170C

Initial boiling point [°C] : N/A

Images:

Fuel Additive RXSOL 4500

Product Short Description: Fuel Additive RXSOL 4500 is a non-metallic product that increases the electrical conductivity of distillate fuels and helps reduce hazards associated with mixing, transfer, and shipment of distillate fuels.

Product Technical Specification:

Remarks:

Images:

Cold Flow Improver Middle Distillates Diesel

Product Short Description: Highly effective flow improver Stop Gelling, Increase Lubricity PREVENTS DEPOSITIONfor heating oil, diesel and super diesel.

Product Technical Specification:

Form	Liquid
Colour	Clear to Light Yellow
Odour	Hydrocarbon-like.
Specific Gravity20 °C	0.90
pH	Not Applicable
Pour Point	-6°С
Flush Point	> 60°С
Solubility	Soluble in Hydrocarbon and Aromatic Solvents

Remarks:

Images:

DEF Blue Diesel Exhaust Fluid

Product Short Description: Diesel Exhaust Fluid Blue DEF eliminates nitrogen oxide emissions.

Product Technical Specification:

Chemical & Physical Properties

Chemical Formula	CO(NH2)2
CAS Number	57-13-6
Molecular Weight	60.056
Specific Gravity	1.140
pH	6.5 - 8.5
Salt-Out Temp	62°F (18°C)
Colour	Clear Liquid
Odor	slight ammonia smell

Typical Analysis :

Urea 23% Nitrogen	50%
Turbidity	5 ppm
pH	8.5 Max
Ammonia	0.03%
Biuret	< 0.25%
Ash	35 ppm
Iron	2 ppm
Chloride	10 ppm
Color - Max	0 (APHA)
Alkalinity - wt (NH3) Max	0.05%

Remarks:

Diesel Exhaust Fluid Blue DEF eliminates nitrogen oxide emissions. We are one of largest supplier of Diesel Exhaust Fluid Blue DEF in Mumbai, Surat, Gandhidham, Chennai, Visakhapatnam, Kolkata, Dubai - Fujairah - Sharjah - Abudhabi.

Images:

Gas Side Cleaner RXSOL

Product Short Description: GAS SIDE CLEANER is sprayed undiluted on a completely dry area on to the upper most point of the system.

Product Technical Specification:

Form	Liquid
Colour	Yellow
Odour	Charastics .
Odor Threshold	No Information Available
pH	11 - 12
Relative density	1.14 to 1.16
Boiling Point	100 °C

Remarks:

CLEANING PROCEDURE

Check if the casing drains to the bilge are open and clear (as applicable)
Open the turbocharger casing drain to the bilge (as applicable)
Prepare spray equipment and connect gas side cleaner drum
Spray gas side cleaner starting from the highest points, ensuring that enough product is applied to allow thorough wetting of tubes/fins below and especially out of sight
Allow soaking for 30 - 60 minutes
Wash off deposits, starting from the highest point, using a fresh water jet
Keep checking the drains of the casings during wash down
Inspect system thoroughly, repeat if necessary

Images:

Cold Flow Improver and Pour Point Dispersant

Product Short Description: Improve the flow in winter (Low temperature). This also reduced risk of fuel waxing and solidification. This product reduces pour point and cold filter plugging point (CFPP), by an average of 15°C and 10°C respectively.

Product Technical Specification:

Appearance:


Colour	: Slightly hazy
Density	: 0.895 kg/ltr
Flash Point	: 60°C
Pour Point	: -30°C

Remarks:

Features & Benefits

Cold flow improver and pour point depressant
Delays the onset of paraffin crystallization to improve cold flow properties
Enables you to handle the fuel at lower temperatures
Adds safety in handling of the fuel by reducing the pour point of the fuel
Keep the wax crystals in suspension preventing wax fallout and accumulation

Images:

Bottle Glass for Fuel Sampling

Product Short Description: Glass Bottle with Cap

Product Technical Specification:

Remarks:

Images:

LiveChat

Search form

Fuel M15 RXSOL

Hydrazine Hydrate 24

Fuel System Icing Inhibitor FSII

Fuel System Icing Inhibitor FSII

Fuel Additive RXSOL 4500

Cold Flow Improver Middle Distillates Diesel

DEF Blue Diesel Exhaust Fluid

Gas Side Cleaner RXSOL

Cold Flow Improver and Pour Point Dispersant

Bottle Glass for Fuel Sampling

RX SOL

LATEST POSTS

Buffer Cleaner

Caustic Soda

Find Us

LiveChat