Images: Alt
Product Short Description: Acetone can be used on stains caused by substances such as fingernail polish or household cement.
Product Description:

Acetone can be used on stains caused by substances such as fingernail polish or household cement. Although it will not damage either natural fibers or most synthetics, it should be pretested to make sure that dyed fabrics will not be harmed. It should not be used on fabrics containing acetate. Use only pure acetone on stains; although most nail polish removers contain acetone, the other ingredients included in these products can worsen stains. 

Product Application:

 

PRODUCT NAME        : ACETONE
CAS number : 67-64-1
UN number   : 1090
Formula             : CH3COCH3
Odour     : Sweetish
Solubility in water    : partialy not soluble
Density      : 0.80   at 15 oC
Boiling point      : 56 oC
Melting point          : -95oC
Viscosity    : 0.337 cp at 15 oC
Flashpoint               : -9.4 oC
Explosive limits : 2.5- 12.8 Vol%
Vapour pressure       : 233 mbar at 20 oC
Skin absorption/irritation   : YES
TLV      Country NL     Year 1995     : 750 ppm               1780    mg/m3
Pollution category      1994     : III

for PURE GRADE pl. click here ................................
Acetone Tech Grade ,

Product Dose:
Glycerine. Glycerine is sold generically in pharmacies. It is used in the preparation of the wet spotter, which is used to remove many kinds of stains.
 
Oxalic Acid. Effective in treating ink and rust stains, oxalic acid crystals may be found in pharmacies or special-ordered from them. Before using the crystals, you must dissolve them in water (1 tablespoon crystals to 1 cup warm water). You may also be able to purchase liquid oxalic acid at hardware stores, where it is sometimes sold as wood bleach. Pretest the solution on a hidden corner before using it on the stain. Moisten the stained area with the solution. Allow to dry, then reapply, keeping the area moist until the stain is removed. Be sure all traces of the solution are rinsed out. Caution: Oxalic acid is poisonous. Avoid all contact with the skin and eyes and wear rubber gloves and other protective clothing when working with it.
 
Sodium Thiosulfate. Sometimes available in crystal form at drugstores and photo supply houses, sodium thiosulfate is also known as photographic "hypo" or fixer. Although considered safe for all fibers and harmless to dyes, it should be­ tested on an inconspicuous area of fabric before use. Handle carefully, as sodium thiosulfate can cause irritation to the eyes, skin, lungs and digestive tract.
 
Turpentine. Turpentine is commonly found in paint and hardware stores and in art supply houses. Most often used as a thinner for oil-base paints, it is effective on paint and grease stains, but it must be used carefully. Caution: Turpentine is flammable and poisonous. Observe all label precautions.
 
Vinegar. Only white vinegar should be used for stain removal. Cider and wine vinegar have color that can leave a stain. Vinegar can be purchased at grocery stores and pharmacies. It contains a 5% acetic acid solution and should be diluted if you must use it on cotton or linen. Vinegar is safe for all other colorfast fibers, but can change the color of some dyes, so always test its effects on an inconspicuous area first. If a dye changes color, rinse the affected area with water and add a few drops of ammonia. Rinse thoroughly with water again.
Product Note:
Product Technical Specification:
Remarks:

Caution: Acetone is flammable and evaporates rapidly, producing toxic fumes. When using acetone, work outside or in a well-ventilated place. Avoid inhaling fumes. Store in a tightly capped container in a cool place.

prod_useful_area:
Product Supply Location:
stock-clearance.png