Categories: RO Chemicals-33
Images: Alt
Product Short Description: Antiscalant / Antifoulant - Corrosion Inhibitor 704 is a highly effective liquid an-tiscalant/antifoulant developed to control scale precipitates and reduce particulate fouling within membrane separation systems
Product Description:

Antiscalant / Antifoulant - Corrosion Inhibitor 704 is a highly effective liquid antiscalant / antifoulant developed to control scale precipitates and reduce particulate fouling within membrane separation systems. This highly effective liquid antiscalant/antifoulant is formulated specifically to be used with RXSOL Coagulant. It is imperative that the coagulants used are compatible with the antiscalant/antifoulant being injected as incompatible chemicals may cause membrane fouling.

Product Application:

For maximum effectiveness, Antiscalant / Antifoulant Corrosion Inhibitor 704 should be added prior to the static mixer or cartridge filter housing. For potable applications the maximum dosage is 10 mg/L. Maximum dilution is 10% with RO permeate or DI water. Antiscalant / Antifoulant Corrosion Inhibitor 704 helps Block particles disperse to maintain the reverse osmosis membrane surface clean.

Product Dose:

Typical dosage range is between 1 and 6 mg/L. Maximum dilution is temperature related as shown:

Temperature  Maximum Dilution %
<30°C 10
30 – 35°C 25
>35°C 50

Important Note: Over and under-dosing may cause membrane fouling so please contact RX Marine International representative to define the optimal feed point and dosage rate. Maximum Dilutions

Product Note:

Future & Benefit

  • Excellent results as a replacement for softenerfilters
  • Compatible with SoliSep* MPT150 coagulant
  • Highly effective over a wide-range of waters For calcium-based and sulfate-based scales, notably, barium sulfate.
  • Compatible with all of the leading RO membranes
  •  Maintains cleaner membrane surfaces by inhibition and dispersing particulate foulants
  • Effective over a wide pH range
  • May be fed neat or diluted
  • Compatible with feedwaters that contain aluminum and iron oxides

Handling : 
 
Avoid prolonged exposure. Provide adequate ventilation. Wear appropriate personal protective equipment. Observe good industrial hygiene practices. Use care in handling/storage.

Storage  : Store in a cool, dry place out of direct sunlight. Keep only in the original container.

Product Technical Specification:

Form: Clear liquid

Color: Light yellow

Specific Gravity: >1

pH value: 4.5 - 5.5 ( Effective over a broad pH range 5 - 9 Compatible with feed waters that contain aluminum and iron oxides )

Solubility in water: 100% soluble

Remarks:
prod_useful_area:
RO ANTISCALANT
 
RXSOL Antiscalant Antifoulant Corrosion Inhibitor 704 Effectively control  CaCO3 up to LSI +3.0, CaSO4, SrSO4, BaSO4, CaF2, SiO2, Fe2O3, etc.

Antiscalant Antifoulant Corrosion Inhibitor 704 RXSOL  is compatible with all of the leading reverse osmosis membranes, such as Dow, Filmtec, GE, Hydranautics, TORAY, etc.
Product Supply Location:

Antiscalant Antifoulant Corrosion Inhibitor 704 Exporter, Manufacturer and supplier in India, UAE, Oman, Kenya. Antiscalant Antifoulant Corrosion Inhibitor 704 available ready stock at Mumbai, Nairobi, Kenya, Chennai, Kolkata, Visakhapatnam, Gandhidham, Kandla, Fujairah, Dubai, Ajman, Abudhabi, Dubai, Sharjah UAE Middle East, Canada, Jinja Uganda, Canada

stock-clearance.png