Categories: Ballast Tank Chem-23
Images: Alt
Product Short Description: A POWERFULL corrosive preventive to prevent corrosion from seawater in ship BALLAST TANK. It contains organic and inorganic inhibitors.
Product Description:

A POWERFULL corrosive preventive to prevent corrosion from seawater in ship BALLAST TANK. It contains organic and inorganic inhibitors with Zinc.

Product Application:

Corroision Inhibitor for METAL Ballast Tank resulting film formation and provide Zinc ppm level inside the Ballast Tank.   It contains no chromates and is completely soluble in sea water. Corrosion Inhibitor for Ballast Tank.

Product Dose:

Directions for use :

Corroision Inhibitor for METALis best fed neat from the drum continuously to the water used to fill the tank or system. Strict proportioning is not required, so long as the turbulence on filling is sufficient to provide effective distribution throughout the system. Where the system to be treated is already full and draining and refilling is impractical, distribution of the Ballast Tank. Corroision Inhibitor for METAL in an open vessel can be achieved by air-agitation or pump circulation. Ballast Tank.Corroision Inhibitor for METAL is recommended for systems in which dissolved oxygen is present and the use of air to encourage mixing will not impair corrosion protection.

Dosing an Control :

The recommended initial dosage of Ballast Tank Inhibitor 9-933 is 100mls.ton of water. This will provide 2 to 4ppm zinc in the water system. For Ballast tanks or systems which are frequently emptied and refilled, the initial charge of 100ml per ton of water should be supplemented by a dosage of 50ml per ton each time the system is refilled.

Product Note:

RXSOL-23-2901-025 is film-forming corrosion inhibitor. RXSOL-23-2901-025 is useful for Ballast Tanks, Bilges, Voids, Cofferdams and Barges.


Features & Benefits :

  • Effective for use in ballast tanks, cofferdams, barges and  voids
  • Forms tightly bonded protective film on all metal surfaces below water level
  • Protective film is stable over a wide pH and temperature range
  • Formulated to give reduced pollution problems if accidentally discharged to sea
  • Ideally suited for ballast and other tank protection during ship lay-up periods
Product Technical Specification:
Corroision Inhibitor for METAL appearance Clear to light amber liquid. Its Density is 1.38 kg/l and pH Value < 1.0

Technical Data

Form        

 Liquid
Colour Clear to Light Amber
Density 1.38
pH <1.0
Freezing Point -45°C
Compatibility Materials N, Hypalon, Neoprene, Polyethylene, Polypropylene, Polyurethane, PVC, Teflon, Vinyl, Viton.
Not compatible Aluminium, Brass, Carbon Steel, Nickel, Stainless Steel 304/316, Plasite 4005/6000 and 7122
Water solubility Soluble
Remarks:

Corroision Inhibitor for METAL is a liquid film-forming corrosion inhibitor. For use in ballast tanks, bilges, voids, cofferdams and barges. It  is a blend of organic and inorganic inhibitors. It contains no chromates and is completely soluble in sea water.

prod_useful_area:
Product Supply Location:

Corroision Inhibitor for Ballast Tank Exporter, manufacturer and supplier in Mumbai, Gandhiddham, Chennai, Visakhapatnam, Kolkata, Fujairah, Oman, Ajmna, Dubai, Sharjah, Abudhabi, Muscat Sohar

stock-clearance.png