Buffer Cleaner
Oman Chemical is leading one Largest Supplier, Manufacture a
Your shopping cart is empty.
Product Code: RXSOL-22-2210-215
Refer this link for complete set of HOLD CLEANING KIT ::: http://rxmarine.com/Ship-hold-cleaning-kit-set-supplier
SLIPcoat supplier in Sohar Muscat Oman, Fujairah Dubai UAE
Product Code: RXSOL-22-1088-500
This is a well balanced blend of corrosion inhibitors , and surface active highly emulsified acidic materials product for the cleaning of aluminium, copper and removal of rust stains on paint work.
Do not eat, drink or smoke while handling it; wash carefully with soap and water before meals and after work shift as shower is recommended.
R 34 : Causes burns.
S 26 : On contact with eyes,Wash eye ball immediately with plenty of water and seek medical advice.
Product Code: RXSOL-22-2201-220
Safety And Handling :-
“RXSOL-22-2201-210” is completely safe to handle, being non-toxic & non corrosive.As with all chemicals general safety and handling procedures apply. Avoid contact with eyes as irritation may occur. Do not take internally. In case of contact with eyes, flush eyes immediately and cupiously with clean running water for 15- minutes and seek medical attention.
Product Code: RXSOL-22-2220-220
Keep tightly closed coantainer. Avoid direct concentrated product contact with any part of BODY skin. The most important things HOLD BRITE RXSOL doesn't release any gases or smell, this uniquness of product kept in safe category.
Product Code: RXSOL-19-6002-025
| Melting Point | 48°C |
| Boiling Point | 100°C |
| Density | 1.01 g/mL at 25 °C |
| Storage temprature | Store at +5°C to +30°C |
| Solublity | Immiscible with alcohol. |
| Form | Solid |
| Specific gravity | 1.667 |
| Colour | White |
| PH | 6.0-8.5 (25℃, 50mg/mL in H2O) |
| Water solublity | Soluble in water. Insoluble in alcohol |
| Sensitivity | Hygroscopic |
| Stability | Stable.Incompatible with strong acids, strong oxidizing agents, iodine, mercury. |
Product Code: RXSOL-22-2025-220
Use a strainer at the pump stack when circulating any solution.
Tank Lining – Stainless / Zinc / Epoxy / Phenolic (Extreme care must be taken if product other than bleach substitute is to be used in any coated space).
Product Code: RXSOL-22-2202-220
ACTIVE MATTER : 98-100 %
WHY RXSOL-22-2202 is better ?
Biodegradable & non flammable , Economical very cost effective
Non-hazardous
Non-fuming
Safe for paint, chrome, aluminum, glass, rubber, plastic, brass & stainless
Dissolves cured cement, concrete, mortar, grout, stucco
Cleans aluminum
Also comes with a foaming spray nozzle
Will not remove rubberized cement
Suitable for the removal of cement deposits and dry stains.
Due to its higher concentration its chemical reaction is very fast.
It's chemical combination meet the requirements of paragraph 1.8.2 of the P&A Standards.
Excellent , concentrated and very effective cement remover with powerfull dissolving properties used on cement and bulk carriers.
The hardened concrete is saturated with Back-Set, either with a brush or by spraying. After 15-20 minutes, the area is again saturated with the chemical. The concrete typically begins to soften in 20-30 minutes,and can be rinsed off with water.The amount required for dosage can be obtained BY knowing the deposition composition as well as nature of cement to be removed.5 to 20 % recommended .These are recommended values based on experience. For optimum results dose RXSOL-22-2202-025 directly to the surface .
The amount required for dosage can be obtained BY knowing the deposition composition as well as nature of CEMENT to be removed . 5 to 20 % recommended .These are recommended values based on experience.
For optimum results dose RXSOL-22-2202-025 directly to the surface
Undiluted : In cases where we deal with heavy deposit build–up, CEMENT REMOVER must be applied undiluted.
Diluted : In cases of light deposition, on large surface areas, a solution between 10–40% may be used.
METHOD :::
1.For heavy deposition and thick layers of cement, a concentrated and stronger cleaner will be necessary to cut through the layers of cement.
2.Use a scraper, metal scrubber or flat head screwdriver to remove as much of the cement as possible.
3.For the remaining cement, apply this chemical
4.Once the cement loosens, scrub the area with a scrubber until it is all removed from the surface.
5.Rinse the area well with clean water.
6.Clean the area with alkaline soap and water
7.Flush system completely.
It is highly concentrated and powerful penetrating agents materials which is effectively react with cement to loosen the bonding strength . Best results can obtain on dry surface of cement. RXSOL'S R & D has developed this molecular cement dissolver as an alternative to using hazardous acids for concrete removal. Back-Set is a one-of-a-kind formula. It uses an active ingredient found in sugar cane syrup, and is completely biodegradable.
RXSOL-22-2202-025 turned this vulnerability into an opportunity. "Back-Set" safely removes hardened concrete from a variety of difficult to clean surfaces. It break down the ionic bond in portland cement, releasing the cement from any surface to which it has adhered.
Product Code: RXSOL-22-1495-040
Product Code: RXSOL-22-2164-001
Product Code: RXSOL-19-3356-225
We are marine chemical supplier since 1996.These Marine Chemicals include different sets of products such as Tank Cleaners, Maintenance Chemicals, Cooling Water Treatment Chemicals, Boiler Water Treatment Chemicals, Fuel Additives, etc.
Oman Chemical is leading one Largest Supplier, Manufacture a
Oman Chemical is leading one Largest Supplier, Manufacture a
