Buffer Cleaner
Oman Chemical is leading one Largest Supplier, Manufacture a
Your shopping cart is empty.
Type: Film forming type corrosion Inhibitor
Appearance: Amber liquid
Sp. Gr.: 0.93-0.96
Pour pt: (-)18 deg. C
Flash point ( minimum): 52 deg.C
Viscosity @40 deg. C (cst): 55-95
Min. effective concentration: 6gm/m3
Maximum allowable concentration:22.5g/m3
| PHYSICAL STATE | Viscous liquid |
| APPEARANCE | Off-white |
| ODOR | Polymer |
| SPECIFIC GRAVITY | 1.07 @ 77 °F / 25 °C |
| DENSITY | 8.9 lb/gal |
| VISCOSITY | 925 cps @ 77 °F / 25 °C |
| POUR POINT | 0 °F / -17.7 °C |
| FREEZING POINT | -47 °F / 8.3 °C |
| VOC CONTENT |
27.9 % EPA Method 24 |
Ionic Character: Highly anionic
Usage:
1.For industrial wastewater treatment and recycle. It has special efficacy for the Settlement of positive charge metal oxides.The usage amount is Just 1% of traditional flocculating agents and the efficiency is perfect. Such as steel mill,Metallurgical Plant and coal washery waste water.
2.Settlement of river sediment / streamsediment
3.Retention and drainage aids, as well as dry strength agent in the Papermaking industry
Appearance: White Crystalline powder
Molecular Weight: 530.9
Melting Range: 49 - 54°C
Color of Toluene Solution: 25 APHA Max.
Color of Fusion: 60 APHA Max.
Volatile Matter: < 0.5%
Ash < 0.1%
Solubility (10 g/100ml Toluene): Clear (25C)
% Transmittance: 425nm – 97% Min
500nm – 97% Min
Solubility: Solubility at 20 degree C (g/100ml solvent):
| Solvent | Solubility |
| Acetone | 26% |
| Benzene | 57% |
| Chloroform | 57% |
| Cyclohexane | 40% |
| Ethanol | 1.5% |
| Ethyl Acetate | 42% |
| n-Hexane | 31% |
| Methanol | 0.6% |
| Toluene | 50% |
| Water | < 0.01% |
Packaging:
Antioxidant A 1076 is available in powder form in a 25 kg net weight, with an inner PE liner.
Storage:
This product may be stored up to two years in a sealed container. Containers should be stored in a cool, dry area. Extended storage at elevated temperatures or exposure to direct heat or sunlight could reduce product life. Keep containers sealed when not in use.
Toxicity & Safety:
This material is not intended for use in products for which prolonged contact with mucous membranes or abraded skin, or implantation within the human body is specially intended, unless the finished product has been tested in accordance with the Food and Drug Administration and/or other applicable safety testing requirements. Because of wide range of such potential uses, Rx Marine International is not able to recommend this material as safe and effective for such uses and assumes no liability for any such uses. Read and understand the Material Safety Data Sheet before using or handling this product.
FDA Regulations: Supplement
| Existing Regulations | Maximum Concentration | Thickness | Food Allowed | Temperatures Allowed |
| Antioxidant for polymers, | ||||
| Olefin copolymers complying with 177.1520 (c), excluding primarily non-crystalline copolymers described in items 3.4 and 3.5 | 0.25% | no restrictions | no restrictions | no restrictions |
| Olefin polymers complying with 177.1520 (c), item 3.4 | 0.25% | no restrictions | all foods for which polymer is approved | no restrictions |
| Olefin polymers complying with 177.1520 (c), item 3.5 | 0.25% | no restrictions | non-fatty foods | no restrictions |
| Adhesives complying with 175.105 | no restrictions | no restrictions | no restrictions | no restrictions |
| Semi-rigid and rigid acrylic and modified acrylic plastics complying with 177.1010 | 0.01% | no restrictions | no restrictions | no restrictions |
| Semi-rigid and rigid acrylic and modified acrylic plastics complying with 177.1010 | 0.2% | no restrictions | foods containing no more than 15% alcohol | no restrictions |
| Polystyrene and rubber-modified polystyrene complying with 177.1640 | 0.25% | no restrictions |
no restrictions except for fatty foods In fatty foods the finished rubber modified polystyrene polymers shall contain not less than 85 weight percent of total polymer units derived from styrene monome |
no restrictions |
| Acrylonitrile-butadiene-styrene copolymers (used in accordance with prior sanction or in compliance with 174-178 and 179.45) | 0.5% | no restrictions | no restrictions | no restrictions |
| Semi-rigid and rigid vinyl chloride plastics modified with methacrylate butadiene-styrene copolymers complying with 178.3790 | 0.05% | no restrictions | no restrictions | no restrictions |
| Rigid polyvinyl chloride 178.3790 | 0.2% | no restrictions | no restrictions | no restrictions |
| Polycarbonate resins complying with 177.1580 | 0.3% | no restrictions | no restrictions | room temperature or below fill and storage |
| Ethylene-vinyl acetate copolymers complying with 177.1350 | 0.1% | no restrictions | no restrictions | no restrictions |
| Nitrile rubber-modified acrylonitrile-methyl acrylate copolymers complying with 177.1480 | 0.2% | no restrictions | no restrictions |
150°F max. (as for polymer) |
| Styrene block polymers complying with 177.1810 | 0.3% | no restrictions | all foods for which polymer is allowed | 150°F max. |
| Vinylidene chloride homopolymers and/or vinylidene chloride copolymers complying with regulations in Parts 175, 176, 177, 179, and 181. The vinylidene chloride copolymers shall contain not less than 50% of total polymer units derived from vinylidene chloride | 0.2% | no restrictions | no restrictions | no restrictions |
| Chlorinated isobutylene isoprene complying with 177.1420 (a) (3) | 0.025% | no restrictions | no restrictions | no restrictions |
| Rubber articles complying with 177.2600 | 0.5% | no restrictions | no restrictions | no restrictions |
Characteristic and Property:
| Physical Appearance | Light brown solid 100 Mesh Particale, free from visible impurities |
| Solubility of 10g of the Material in 1 liter of HSD Oil at 24 ± 2 °C | clear solution |
| Melting Point, °C | 150 (Minimum). |
| Specific Gravity | 1.05 |
| Flash Point |
>298°C |
Spurt Loss of Conventional Water :
Base Gel (Gelling Agent Grade 11 in 1% KC1, having 50-55 cP Viscosity at 511 sec-' shear rate) on treatment with 10 g / litre of Sample and subjecting it to a pressure of 1000 psi at 24 ± 2 °C, ml : 50(Maximum).
Physical Properties :
Appearance : White Color
Solubility : Soluble in water, Increase the Solubility with temperature Insoluble in Alcohol.
pH (10% soln. at 25º) : 11 -11.5
Moisture : NMT 5%
SPECIFICATIONS:
| Color: | Opaque white to yellow |
| Odor: | Sweet to Mild chemical odor Specific Gravity: 0.98 @25°C |
| Flash Point: | 200°F |
| pH (10%): | 5.63 |
| Solubility: | Water Dispersible |
PHYSICAL PROPERTIES:
| Appearance | :Colourless to Pale Yellow Color Homogeneous Liquid |
| pH | :3.0 – 6.0 |
| Viscosity | :< 100 CPS @ 25˚ C |
| Density | :1.00 ± 0.10 gm/ml @ 25˚ C |
| Solubility |
:Soluble in Water |
|
Appearance |
Colourless to Pale Yellow Color Homogeneous Liquid |
|
pH |
8.0 – 10.0 |
|
Viscosity |
< 200 CPS @ 25˚ C |
|
Density |
1.00 ± 0.05 gm/ml @ 25˚ C |
|
Solubility |
Soluble in Water |
|
Appearance |
Colourless to Pale Yellow Color Homogeneous Liquid |
|
pH |
8.0 – 10.0 |
|
Viscosity |
< 200 CPS @ 25˚ C |
|
Density |
1.00 ± 0.05 gm/ml @ 25˚ C |
|
Solubility |
Soluble in Water |
Chemical Composition :
| Caco3 | : | 48 % to 56 % |
| Mgco3 | : | 34 % to 43 % |
| Silica | : | 1.05 % |
| Cao | : | 31.08 % |
| Mgo | : |
20.10 % |
We are marine chemical supplier since 1996.These Marine Chemicals include different sets of products such as Tank Cleaners, Maintenance Chemicals, Cooling Water Treatment Chemicals, Boiler Water Treatment Chemicals, Fuel Additives, etc.
Oman Chemical is leading one Largest Supplier, Manufacture a
Oman Chemical is leading one Largest Supplier, Manufacture a
