Buffer Cleaner
Oman Chemical is leading one Largest Supplier, Manufacture a
| Parameter | Unit | Typical Value |
|---|---|---|
| Appearance | – | Clear to pale yellow liquid |
| pH | – | 3.5 – 5.5 |
| Density @ 25°C | g/cm³ | 1.08 +/- 0.05 |
| Solubility | – | Miscible with water and hydrocarbons |
Broad-spectrum CMIT/MIT-based diesel biocide formulated in dipropylene glycol to control bacterial and fungal contamination in fuel storage systems. Prevents sludge formation, corrosion, and fuel degradation. Powerful diesel biocide combining CMIT/MIT actives for long-term microbial protection. Keeps diesel clean, prevents filter clogging, and protects tanks from corrosion. Advanced isothiazolinone biocide for diesel and fuel systems. Controls microbial growth, protects against corrosion, and extends fuel life. Effective fuel preservative that kills bacteria and fungi in diesel storage tanks, preventing sludge and fuel spoilage.


| Parameter | Target / Range |
|---|---|
| Appearance | Free-flowing beige/tan powder |
| Odor | Mild/neutral |
| Moisture (LOD, 105 °C) | ≤ 10% |
| Bulk density | ~0.6–0.9 g/mL |
| pH (1% w/v slurry) | 7.0–9.0 |

CAS Number: 1341-49-7
UN number: 1727
Boiling point: 240 °C (464 °F; 513 K)
EC Number: 215-676-4
Molecular Weight: 57.04 g/mol
Molecular Formula: NH4HF2
Ammonium bifluoride [NH4.HF2]
Melting point :124.6°C (Sublimes at higher temperature)
Boiling point : 239.5°C
When dissolved in water, cooling takes place. Material is Hygroscopic at 50% humidity.
Analysis
Appearance : White crystalline solid (Orthorhombic crystals)
NH4HF2 : 98.76%*
(NH4)2SO4 : 0.05%
(NH4)2SiF6 :0.20%
Moisture :0.59%
Solubility in water : 60.2 g at 20°C and 156.4g at 60°C per 100ml of water
Solubility in HCl : 10% (w/v) sample is soluble in 15% (w/w) of HCl at 25°C
*Assay: Weigh accurately about 1.0gm of Ammonium bi fluoride sample. Dissolve it in 100ml distilled water. Titrate with about 1N NaOH. Use Phenolphthalein as indicator. End point is Colourless to Pink.
% acidity as HF = A / B
1st calculate Consumption of NaOH, B.R. X Normality of NaOH X 0.02 X 100 = A
Then Divided the result with " Weight of the sample " = B
%NH4HF= %acidityasHFx57 / 20
Ammonium bifluoride is a white crystal salt chemically when ammonium bifluoride comes in contact with water resulting with the formation of HF. It is used to brighten aluminum and other metals.

| Form | Liquid |
| Colour | Colourless to slightly Yellow |
| Odour | Sharp |
| Flash Point | > 100 degree C |
| Density | 1.05-1.11 g/cm3 (25C) |
| pH |
3 - 7 |
Non-Flammable
Safe Plant Handling
Low Odor
Provides corrosion protection in the liquid and the vapor phase
When used in hydrostatic testing the product provides protection in liquids below, above and at the liquid levels. Protection of recessed and hard to reach areas. Complicated valves and the interior surfaces of piping and equipment, which are often difficult or impossible to reach, are protected with true Vapor Corrosion Inhibitor action. Can be applied for hydrotest solution, metalworking fluids, coatings, adhesives and water treatment formulations.
Risk of serious damage to eyes. In case of contact with eyes, rinse immediately with plenty of water & seek medical advice. Wear suitable gloves and eye / face protection

| Property | Value |
|---|---|
| Appearance | Amber to brown clear liquid |
| pH (1% solution) | Acidic |
| Density @ 25°C | 0.95 – 1.00 g/cm³ |
| Solubility | Dispersible in HCl and brine |
| Flash Point (closed cup) | ~32°C |
| Pour Point | Below 5°C |
| Shelf Life | 12 months (sealed container) |
General Guidelines to use Acid Corrosion Inhibitor for Hydrochloric Acid


| Parameter | Value |
|---|---|
| Appearance | Slight Hazy Liquid |
| Specific Gravity (@25°C) | >1 |
| Flash Point | > 65°C |
| Solubility | Dispersible in Hydrocarbons |
| pH (Neat) |
Neutral (6.0 – 7.5) |

TYPICAL USES

