Buffer Cleaner
Oman Chemical is leading one Largest Supplier, Manufacture a
Your shopping cart is empty.
RXSOL Odor Eliminator is different to nearly all other odour neutralisers or masking agents. The difference lies in the product makeup: nearly every product in the market is a blend of essential oils or plant extracts combined with a standard surfactant while RXSOL Odor Eliminator is made of food and cosmetic grade compounds and contain only 1% essential oils or plant extracts (by total volume of concentrate). Basic chemistry proves all essential oil and plant extract based products cannot truly neutralise odours; they can only mask them or encapsulate them for a period before releasing them again. Essential oils and plant extracts cannot bind to, and react with, a compound such as H2S and change the structure of that volatile compound into a non-volatile compound.
1) Fogging System 2) Vapour Phase System 3) Direct Dosing into liquid
It is worth explaining, that, unlike masking agents,RXSOL Odor Eliminator does not blow away in the wind. Being positively charged, it will seek out target molecules and bond to them resulting in a chemical reaction forming a non-volitile organic salt. If a RXSOL Odor Eliminator molecule does not find a target, it will attach itself to a negatively charged surface and wait for an odorous molecule. As with all gases, the odorous molecules are constantly moving and, given time, will come into contact with a RXSOL Odor Eliminator molecule and be destroyed.
Fogging System:
Fogging systems spraying RXSOL Odor Eliminator are used when odour is from open-air sources.RXSOL Odor Eliminator is sprayed on an interval basis depending on odour type and strength. An example of this is running the system for 30 seconds ON and 2 minutes OFF.
Some examples of facilities where fogging systems can be used:
Fogging systems spraying RXSOL Odor Eliminator is also used in indoor facilities. Some examples are:
Vapour Phase Systems :
Vapour phase systems delivering RXSOL Odor Eliminator is used when odour is from ducted, or confined, air sources. This type of application is designed to inject the vapour into a continuous flow air stream that is part of an exhaust or extraction process. These types of systems are delivering vapour into the air stream continuously. Some examples of these types of problems are:
Direct Dosing:
RXSOL Odor Eliminator is exceptionally effective in capturing its target in a liquid solution. Liquid solutions only produce odours when they reach a point where cavitation occurs, say at the end of the pipe or weir. Odour is produced as a result of the reduction in water pressure and the odorous gases are stripped out of solution.
This method of application is ideal for waste treatment plants, animal and fish processing plants, and pig and chicken farms, which have wash down systems where waste water is collected and stored in a settlement pond system or holding tanks.
RXSOL Odor Eliminator molecules will attach to the odorous compounds to remove toxins from the water and, over about seven days, will spread through the whole anaerobic/facultative/aerobic pond system to remove odours. This action chemically bonds (valency bond) to the odorous compound to form a non-toxic, non-odorous organic salt. Bacteria will then break down this salt. As a result, there is no increase in BOD, and no regeneration of foul odours.
RXSOL Odor Eliminator can best be thought of as a detoxifying catalyst that beneficially affects the pond ecology. It is extremely powerful.
RXSOL Odor Eliminator , which is not required to destroy toxic odorous compounds, will continue in the stream and neutralise any air that is stripped from the stream due to water turbulence at the treatment station or ponds.
| Name of Product | Available Chlorine | Volume of Water to be treated | Packing |
| RX - Chlor 3.5 mg. | 2 mg | 1 litres | 10 x 10 Strips |
| RX-Chlor 8.5 mg. | 5 mg. | 1-2 litres | 10 x 10 Strips |
| RX-Chlor 17 mg. | 10 Mg. | 4-5 litres | 10 x 10 Strips |
| RX-Chlor 33 mg. | 20 Mg. | 8 litres | 10 x 10 Strips |
| RX-Chlor 67 mg. | 40 Mg. | 10-12 litres | 10 x 10 Strips |
| RX-Chlor 75 mg. | 45 Mg. | 20 litres | 10 x 10 Strips |
| RX-Chlor 167 mg. | 100 Mg. | 25-30 litres | 10 x 10 Strips |
| RX-Chlor 400 mg. | 240 Mg. | 50-80 litres | 8 x 8 Strips |
| RX-Chlor 500 mg. | 300 Mg. | 100-120 litres | 50 Tablets Jar |
| RX-Chlor 1.67gm. | 1000 Mg. | 500 litres | 50 Tablets Jar |
| RX-Chlor 2.5gm. | 1500 Mg. | 750 litres | 1000 Tablets Jar |
| RX-Chlor 3.5gm. | 2100 Mg. | 1000 litres | 50 Tablets Jar |
| RX-Chlor 4gm. | 2400 Mg. | 1000 - 1200 litres | 50 Tablets Jar |
| RX-Chlor 15gm. | 9000 Mg. | 4000 litres | 50 Tablets Jar |
| RX-Chlor 8.68gm. | 5000 Mg. | 2000 litres | 50 Tablets Jar |
| RX-Chlor 200gm. | 1,20,000 Mg. | 50000 litres | 50 Tablets Jar |
12.5% wt. SODIUM HYPOCHLORITE - EXTRA - PURE
| Parameters | Specification Range | Typical |
|
Chlorine Mix
|
12.5 - 13.2 | 13.0 |
| Available Chlorine (%wt) | 11.9 - 12.6 | 12.4 |
| Available Chlorine (%vol) | 14.3 - 15.3 | 15.0 |
| Available Chlorine grams/liter | 143 - 153 | 150 |
| Excess Caustic (%wt) | 0.25 - 0.80 | 0.30 |
| Specific Gravity @ 60°F | 1.197 - 1.220 | 1.210 |
| pH | 12.0 - 13.0 | 12.50 |
| Iron (Fe) ppm | <0.5 | 0.05 |
| Nickel (Ni) ppm | <0.2 | 0.02 |
| Copper (Cu) ppm | <0.2 | 0.05 |
| Mercury (Hg) ppb | 0.001 - 0.003 | 0.002 |
| Sodium Chloride (NaCl)% | <15.0 | 12.5 |
Appearance: Clear greenish-yellow liquid miscible in any proportion with water.
This product meets the requirements of NSF standard 60 for drinking water.
Never use materials without proper knowledge and guideline, Refer MSDS and Technical bulletine before uses of this product.
RXSOL-31-3021-010 is a dry organic chlorine in tablet form giving a high available chlorine base, ensuring an effective sterilising and disinfecting action in slow release form. 200g tablet with 90-92% available chlorine. For chlorination of swimming pools, sewage and waste water.Standard tablet size: 75 mm diameter - 25 mm H. For swimming pool water treatment: 4 large tablets every 100 m3 of water to be put in skimmers or in floating trays. For waste water treatment, fill the chlorinating pipes until 2 to 5 PPM of residual active chlorine are obtained. If below 2 PPM, use both chlorinating pipes. Assess residual chlorine level with the appropriate TEST KIT supplied by Rx Marine International Rxsol Chlorine Test kit.
Application :
Purification of Drinking Water.
Treatment for Seawage.
Treatment for Swiming Pool
Dose:
The tablet is dosed to the water supply tank preferably suspended away from the fabric of the tank. The tablets should not be allowed to rest on the bottom of metal tanks. Being in tablet form this is a safer method of administering chlorine than the usual liquid preparations. When used as part of a planned programme of protection it will assist in control of problems associated with such areas as bacterial and organic foulingincluding legionnaires disease.
Dose Rate:
Rates will be determined by the extent of current problems. An initial dose will be required to give a free residual chlorine reserve of 5-50ppm for a minimum of 1 hour. Thereafter a reserve of 0.5-2.0ppm is normally sufficient. Also available as rapid dissolving (Bechlor 126RD) 1 tablet will give 50ppm chlorine in 3.6m3 water.
SPECIFICATION
| Active chlorine % | ≥ 90.0 |
| Chemical Formula | C 3 O 3 N 3 CL 3 |
| Molecular Weight | 232.41 |
| Molecular formula | 143.0 |
| Melting Point | 235 |
| UN No. | 2468 |
| Class | 5.1 |
| CAS No. | 87-90-1 |
| Moisture% | ≤ 0.5 |
| PH (1% solution) | 2.7-3.3 |
| Appearance | tablet (200g) |
| Packing | 10 Kgs |
| Store | Store in cool, dry, well ventilated area. |
12.5% wt. SODIUM HYPOCHLORITE - EXTRA - PURE
| Parameters | Specification Range | Typical |
|
Sodium Hypochlorite as NaOCl (%wt) |
12.5 - 13.2 | 13.0 |
| Available Chlorine (%wt) | 11.9 - 12.6 | 12.4 |
| Available Chlorine (%vol) | 14.3 - 15.3 | 15.0 |
| Available Chlorine grams/liter | 143 - 153 | 150 |
| Excess Caustic (%wt) | 0.25 - 0.80 | 0.30 |
| Specific Gravity @ 60°F | 1.197 - 1.220 | 1.210 |
| pH | 12.0 - 13.0 | 12.50 |
| Iron (Fe) ppm | <0.5 | 0.05 |
| Nickel (Ni) ppm | <0.2 | 0.02 |
| Copper (Cu) ppm | <0.2 | 0.05 |
| Mercury (Hg) ppb | 0.001 - 0.003 | 0.002 |
| Sodium Chloride (NaCl)% | <15.0 | 12.5 |
Appearance: Clear greenish-yellow liquid miscible in any proportion with water.
This product meets the requirements of NSF standard 60 for drinking water.
We are marine chemical supplier since 1996.These Marine Chemicals include different sets of products such as Tank Cleaners, Maintenance Chemicals, Cooling Water Treatment Chemicals, Boiler Water Treatment Chemicals, Fuel Additives, etc.
Oman Chemical is leading one Largest Supplier, Manufacture a
Oman Chemical is leading one Largest Supplier, Manufacture a
