Buffer Cleaner
Oman Chemical is leading one Largest Supplier, Manufacture a
Your shopping cart is empty.
Help full link to test bacterials growth in drinking water http://www.rxmarine.com/H2S-vial-Bacteriological-Kit-manufacturer-supplier-test-kit , This test is very simple and can be tested by unskilled / skilled helper both.
|
Identification |
|
|
Properties |
|
|
Na2CO3 |
|
|
105.9784 g/mol |
|
|
Appearance |
White solid, hygroscopic |
|
Odorless |
|
|
2.54 g/cm3 |
|
|
851 °C |
|
|
1633 °C |
|
|
Solubility in water |
7 g/100 mL (0 °C) |
|
Basicity (pKb) |
4.67 |
|
Refractive index (nD) |
1.485 |
|
Irritant (Xi) |
|
|
0 1 1 |
|
|
Non-flammable |
|
|
4090 mg/kg (rat, oral) |
|
Sodium carbonate (also known as Carbonato Di Sodio), Na2CO3 is a sodium salt of carbonic acid. It most commonly occurs as a crystalline heptahydrate, which readily effloresces to form a white powder . Sodium carbonate is domestically well known for its everyday use as a water softener.
RXSOL-31-3021-001 is a dry organic chlorine in tablet form giving a high available chlorine base, ensuring an effective sterilising and disinfecting action in slow release form. 200g tablet with 90-92% available chlorine. For chlorination of swimming pools, sewage and waste water.Standard tablet size: 75 mm diameter - 25 mm H. For swimming pool water treatment: 4 large tablets every 100 m3 of water to be put in skimmers or in floating trays. For waste water treatment, fill the chlorinating pipes until 2 to 5 PPM of residual active chlorine are obtained. If below 2 PPM, use both chlorinating pipes. Assess residual chlorine level with the appropriate TEST KIT supplied by Rx Marine International Rxsol Chlorine Test kit.
Application :
Purification of Drinking Water.
Treatment for Seawage.
Treatment for Swiming Pool
Dose:
The tablet is dosed to the water supply tank preferably suspended away from the fabric of the tank. The tablets should not be allowed to rest on the bottom of metal tanks. Being in tablet form this is a safer method of administering chlorine than the usual liquid preparations. When used as part of a planned programme of protection it will assist in control of problems associated with such areas as bacterial and organic foulingincluding legionnaires disease.
Dose Rate:
Rates will be determined by the extent of current problems. An initial dose will be required to give a free residual chlorine reserve of 5-50ppm for a minimum of 1 hour. Thereafter a reserve of 0.5-2.0ppm is normally sufficient. Also available as rapid dissolving (Bechlor 126RD) 1 tablet will give 50ppm chlorine in 3.6m3 water.
SPECIFICATION
| Active chlorine % | ≥ 90.0 |
| Chemical Formula | C 3 O 3 N 3 CL 3 |
| Molecular Weight | 232.41 |
| Molecular formula | 143.0 |
| Melting Point | 235 |
| UN No. | 2468 |
| Class | 5.1 |
| CAS No. | 87-90-1 |
| Moisture% | ≤ 0.5 |
| PH (1% solution) | 2.7-3.3 |
| Appearance | tablet (200g) |
| Packing | 10 Kgs |
| Store | Store in cool, dry, well ventilated area. |
12.5% wt. SODIUM HYPOCHLORITE - EXTRA - PURE
| Parameters | Specification Range | Typical |
|
Sodium Hypochlorite as NaOCl (%wt) |
12.5 - 13.2 | 13.0 |
| Available Chlorine (%wt) | 11.9 - 12.6 | 12.4 |
| Available Chlorine (%vol) | 14.3 - 15.3 | 15.0 |
| Available Chlorine grams/liter | 143 - 153 | 150 |
| Excess Caustic (%wt) | 0.25 - 0.80 | 0.30 |
| Specific Gravity @ 60°F | 1.197 - 1.220 | 1.210 |
| pH | 12.0 - 13.0 | 12.50 |
| Iron (Fe) ppm | <0.5 | 0.05 |
| Nickel (Ni) ppm | <0.2 | 0.02 |
| Copper (Cu) ppm | <0.2 | 0.05 |
| Mercury (Hg) ppb | 0.001 - 0.003 | 0.002 |
| Sodium Chloride (NaCl)% | <15.0 | 12.5 |
Appearance: Clear greenish-yellow liquid miscible in any proportion with water.
This product meets the requirements of NSF standard 60 for drinking water.
|
1 |
Available Chlorine |
14-16% |
|
2 |
Ph |
11-13. |
|
3 |
Sp.Gravity |
1.23 - 1.40 |
|
4 |
Free Alkali (Per Lts ) |
0.42to0.5% |
|
5 |
Stability |
2 to 3 Month ( GENERAL ATMOSPHRIC TEMP ) OR more stable Below 18°C |
|
6 |
Viscocity |
0.98 |
|
7 |
Alkalinity |
1.99 |
|
8 |
Appearance |
Pale yellow / green |
|
9 |
Flash point |
None |
|
10 |
Turbidity |
nil |
|
11 |
CU |
NIL |
|
12 |
Biodegradable |
Completely biodegradable |
|
13 |
Free Acid |
None |
|
1 |
Available Chlorine |
14-16% |
|
2 |
Ph |
11-13. |
|
3 |
Sp.Gravity |
1.23 - 1.40 |
|
4 |
Free Alkali (Per Lts ) |
0.42to0.5% |
|
5 |
Stability |
2 to 3 Month ( GENERAL ATMOSPHRIC TEMP ) OR more stable Below 18°C |
|
6 |
Viscocity |
0.98 |
|
7 |
Alkalinity |
1.99 |
|
8 |
Appearance |
Pale yellow / green |
|
9 |
Flash point |
None |
|
10 |
Turbidity |
nil |
|
11 |
CU |
NIL |
|
12 |
Biodegradable |
Completely biodegradable |
|
13 |
Free Acid |
None |
We are marine chemical supplier since 1996.These Marine Chemicals include different sets of products such as Tank Cleaners, Maintenance Chemicals, Cooling Water Treatment Chemicals, Boiler Water Treatment Chemicals, Fuel Additives, etc.
Oman Chemical is leading one Largest Supplier, Manufacture a
Oman Chemical is leading one Largest Supplier, Manufacture a
