House / HOTEL & CATERING-15 | Marine Chemicals,Tank Cleaning Chemicals,Water Chemicals Products,Cooling Water Treatment Chemicals

Petroleum Jelly

Product Short Description: semisolid jelly-like substance. Petroleum jelly also called petrolatum, white petrolatum, soft paraffin, or multi-hydrocarbon.

Product Technical Specification:

CHARACTERISTICS	:	SPECIFICATION
Description	:	A White Translucent Unctuous Mass, Slightly Fluorescent in daylight when melted, odourless, when wubbed on the skin
Solubility	:	Slightly soluble in Methylene Chloride, insoluble in Water, Ethanol (96%) & Glycerol
Drop Point Deg.C	:	40 – 60
Consistency Dmm	:	100-300
Infrared Absorption of A 0.05 % W/V solution In 2,2,4 – trimethylpentane, at about 290 Nm	:	As per specification
Acidity or Alkalinity	:	As per specification
Polycyclic Aromatic Hydrocarbons	:	As per specification
Sulphated Ash,%	:	0.05 Maximum

Remarks:

HANDLING & STORAGE

Handling: Avoid contact with skin and eyes. Wash thoroughly after handling. Remove contaminated clothing and wash before reuse. Keep away from all ignition sources.

Storage: Store in cool, well- ventilated place away from sources of heat and direct sunlight. Keep container tightly closed. Keep only in the original container.

HEALTH & SAFETY:
Product is unlikely to present any significant health or safety hazards when properly used in the recommended application and good standards of industrial and personal hygiene are maintained.

Images:

Efflorescence Cleaner

Product Short Description: Efflorescence Remover removes white, chalky residue efflorescence and mild rust stains found on concrete and masonry

Product Technical Specification:

Remarks:

Efflorescence remover is a cleaning solution that removes white, powdery efflorescence buildup from hard surfaces like tiles, concrete, bricks, and pavers. Efflorescence is a white substance that results from salts that come from the inside of masonry.

Pressure washer: For fresh efflorescence, you can use a pressure washer to dissolve it quickly. This method is only suitable for exterior walls, and you'll need to dry the wall completely to prevent the salt from reappearing.

Brush and water: For small amounts of loose efflorescence, you can scrub it with a stiff brush or wash it with a power washer.

Images:

COIL Brite C SHINE Alkaline

Product Short Description: Alkaline-based ceaner with a strong foaming action designed to rapidly emulsify greasy soils and oxidation…thereby leaving coils dirt-free and shining. suitable product for cleaning air-cooled condensers, permanent filters and other finned heating and cooling coils.

Product Technical Specification:

PHYSICAL PROPERTIES ::--

APPEARANCE…..Clear Brownish Liquid
ODOR …..Fresh
pH …..13.50
SPECIFICGRAVITY…..1.25

Other Grade of Coil Cleaner :::

Coil Brite Rx Yellow - Part No.- RXSOL-16-1680-005 --- www.rxmarine.com/coil-brite

Coil Cleaner - Part No.- RXSOL-41-8672-025 --- www.rxmarine.com/Coil-Cleaner-RXSOL

Coil Cleaner ( Non Rinsing Type ) - Part No. - RXSOL-16-1697-025 --- www.rxmarine.com/coil-cleaner-non-rinsing

Condenser Coil Cleaner - Part No.- RXSOL-50-5015-025 --- www.rxmarine.com/Condensor-cleaner

Evaporator Coil Cleaner ::: Part No.- RXSOL-51-6004-025 --- www.rxmarine.com/evaporator-coil-cleaner

Coil Cleaner Free from ACID ::: Part No.- RXSOL-16-1082-025 --- http://rxmarine.com/Coil-Cleaner-Free-from-ACID

C-SHINE Alkaline coil cleaner ::: Part No- RXSOL-16-1668-025 --- www.rxmarine.com/C-SHINE-RXSOL-coil-cleaner

Remarks:

C SHINE coil cleaner specialized to remove dirt deposits, oily and greasy deposition from Condenser and Cooling coils. C-shine is specialized cleaning Chemical for Air Conditioner cleaning and Coil Cleaning.

C-Shine contains powerful selected alkaline additives with wetting agent and surfactant which helps to penetrates and remove dirt, grease and oil accumulation on evaporators and condenser coils quickly.

Images:

Copper Stain Remover

Product Short Description: Never USE common acidic materials to clean Copper, As after cleaning of STAIN from Acid it will turn into BLACK

Product Technical Specification:

Remarks:

When copper surface is exposed to atmosphere, Initially, the copper darkens, and takes on a black appearance as the copper oxidises to cupric oxide CuO. Then the carbon dioxide in the air, dissolved in water to form carbonic acid, H2CO3, will attack the basic copper oxide to form hydrated copper carbonate resulting pastel green on copper items.

Images:

Wood Shield Anti Fungal Powder

Product Short Description: Provide robust and long-lasting protection against fungal decay, ensuring your wood stays pristine and durable for years to come

Product Technical Specification:

Appearance: White crystalline solid

Color: White

Odour: None

Taste: Alkaline

Refractive Index: 1.472

Boiling Point/Range : 1460 degree Celcius

Melting Point/Range: <800 degree Celcius

Flash point: Not applicable

Flammability: Not Inflammable

Autoignition temperature: Not applicable

Explosive properties: None

Oxidizing properties: Not applicable

Vapour pressure: None

Density: 2170 kg/m2

Relative Density: 1.7

Heavy atom count: 23

Complexity: 121

Bulk Density: 1030 kg/m2

Solubility in water: 310 g/l (18 degree celcius)

Solubility: Soluble in Glycerol and insoluble in ethanol

pH value: 7.8 (18 degree Celcius) and 9.2 (25 degree Celcius)

Viscosity: Not applicable

Relaive Vapour density (air=1): None

Remarks:

Images:

Silica Gel White Beads 5 Gram

Product Short Description: Silica gel absorbs excess moisture and condensation. Packed as per the specific requirements.

Product Technical Specification:

SPECIFICATION FOR SILICA GEL INDICATING (BLUE) / NON INDICATING (WHITE):

Loss on drying :	Not more that 5% mass
Absorption Capacity :	27% min on the basis of mass
PH :	3.5 to 8.
Chlorides :	0.05% by mass max
Cobalt (as CoCl2) :	0.4 by mass max
Ammonium compounds (as NaH3):	0.5% by mass max
Sulphates (Na2SO4) :	0.5% by mass max
Packing:	25 / 50 kgs M S drum (Smaller packing available).

Remarks:

Images:

Sodium Lauryl Sulphate SLS

Product Short Description: Excellent decontamination, Emulsification and Foaming property. With rich and longstanding foam.

Product Technical Specification:

Item	Specification
Item	95%	92%	30%
Appearance 25`c	White to yellowish powder of needle	White to yellowish powder to needle	Colorless to yellowish transparent liquid
Odor	Characteristic odor	Characteristic odor	Characteristic odor
Active matter, %	95.0 min	92.0 max	30+1
Petroleum ether soluble substance, %	1.5 max.	1.5 max.	1.5 max.
Sodium sulfate, %	3.0 max.	5.0 max.	1.0 max.
pH value (25`C , 1% Am.aq.sol)	7.5-9.5	7.5.9.5	7.5.9.5
Color, Hazen (5%Am.aq.sol)	10 max.	10 max.	10 max.
Water content,%	3.0 max.	5.0 max	/

Remarks:

Sodium Lauryl Sulfate (SLS) 95%

Appearance,25℃: White to yellowish powder or needle
Odor: Characteristic odor
Active matter, %: 95.0 min.
Petroleum ether soluble substance, %: 1.5 max.
Sodium sulfate, %: 3.0 max.
Ph value (25℃, 1% Am.aq.sol): 7.5-9.5
Color, Hazen (5% Am.aq.sol): 10 max.
Water content, %: 3.0 max.

Sodium Lauryl Sulfate (SLS ) 92%
Appearance,25℃: White to yellowish powder or needle
Odor: Characteristic odor
Active matter, %: 92.0 min.
Petroleum ether soluble substance, %: 1.5 max.
Sodium sulfate, %: 5.0 max.
Ph value (25℃, 1% Am.aq.sol): 7.5-9.5
Color, Hazen (5% Am.aq.sol): 10 max.
Water content, %: 5.0 max.

Sodium Lauryl Sulfate (SLS ) 30%
Appearance,25℃: White to yellowish powder or needle
Odor: Characteristic odor
Active matter, %: 30±1
Petroleum ether soluble substance, %: 1.5 max.
Sodium sulfate, %: 1.0 max.
Ph value (25℃, 1% Am.aq.sol): 7.5-9.5
Color, Hazen (5% Am.aq.sol): 10 max.
Water content, %: nill
Packing

Item	Packing	QuantityFCL	N.W/FCL	G.W/FCL
SLS 95 or 92%	20kgs/Bag	525 Bags	10.50MT	10.763MT
SLS 95 or 92%	20kgs/Bag	400 Bags	8.00MT	8.200MT
SLS 30%	200Kgs/Plastic Drum	80 Drums	16.00MT	16.800MT
SLS 30%	1000Kgs/IBC	18 IBCs	18.00MT	19.152MT

SLS 95% or 92%:
1) 20kg/bag, 10.5mt/fcl (N.W.),10.763mt/fcl (G.W.) without pallet
2) 20kg/bag, 8mt/fcl (N.W.),8.2mt/fcl (G.W.) with pallet SLS 30%:
1) 200kg/plastic drum, 16mt/fcl (N.W.), 16.8mt/fcl (G.W.)
2) 1000kg/IBC, 18mt/fcl (N.W.), 19.152mt/fcl (G.W.)

Storage: Stored in dry, cool and ventilated place, kept away from sunshine and rain.

Images:

STICK N SOL

Product Short Description: Fully active cleaner specially formulated for the removal of “STICKER” & tuff oily stains residues. Sticker removed and cleaning is actived with out the need for Scrubbing or Brushing which can cause mechanical damages to discs and result in poor perfor

Product Technical Specification:

Product Properties:-

Product Name	STICNSOL (Wetting EmulsifyingAgent )
Active Matter	100%
Consistency	Liquid
Emulsifying Property	Good for emulsification of Oils , Gum , Wax, Greases , Polymer & Solvents , TETRA CHLOROETHYLENE ( PC )
Wetting Property	Good Wetting & Emulsifying Property
Ionic Nature	Non-Ionic
Colour	Pale Yellow
Appearance	Clear liquid
Odour	Pine based
Moisture	0.5 % (max)
Density	In g/cm³ at 15°C: 0.89
Flash Point	(PMCC)°C: Above 63
Compatibility
Metal	No known effect
Rubber	May swell
Synthetic rubber	May swell
PACKAGING	Order No	Size (in litres)
	RXSOL-15-1017	5,25 , 35

Remarks:

Safety And Handling:- “RXSOL-15-1017” is completely safe to handle, being non-toxic & non corrosive.As with all chemicals general safety and handling procedures apply.Avoid contact with eyes as irritation may occur. Do not take internally in case of contact with eyes, flush eyes immediately and cupiously with clean running water for 15- minutes and seek medical attention.

Images:

LiveChat

Search form

Duct Air Treatment

Petroleum Jelly

Efflorescence Cleaner

COIL Brite C SHINE Alkaline

Copper Stain Remover

Wood Shield Anti Fungal Powder

VALERIC ACID

Silica Gel White Beads 5 Gram

Sodium Lauryl Sulphate SLS

STICK N SOL

RX SOL

LATEST POSTS

Buffer Cleaner

Caustic Soda

Find Us

LiveChat