Buffer Cleaner
Oman Chemical is leading one Largest Supplier, Manufacture a
CHARACTERISTICS | : | SPECIFICATION |
Description | : | A White Translucent Unctuous Mass, Slightly Fluorescent in daylight when melted, odourless, when wubbed on the skin |
Solubility | : | Slightly soluble in Methylene Chloride, insoluble in Water, Ethanol (96%) & Glycerol |
Drop Point Deg.C | : | 40 – 60 |
Consistency Dmm | : | 100-300 |
Infrared Absorption of A 0.05 % W/V solution In 2,2,4 – trimethylpentane, at about 290 Nm | : | As per specification |
Acidity or Alkalinity | : | As per specification |
Polycyclic Aromatic Hydrocarbons | : | As per specification |
Sulphated Ash,% | : |
0.05 Maximum |
HANDLING & STORAGE
Handling: Avoid contact with skin and eyes. Wash thoroughly after handling. Remove contaminated clothing and wash before reuse. Keep away from all ignition sources.
Storage: Store in cool, well- ventilated place away from sources of heat and direct sunlight. Keep container tightly closed. Keep only in the original container.
HEALTH & SAFETY:
Product is unlikely to present any significant health or safety hazards when properly used in the recommended application and good standards of industrial and personal hygiene are maintained.
PHYSICAL PROPERTIES ::--
APPEARANCE…..Clear Brownish Liquid
ODOR …..Fresh
pH …..13.50
SPECIFICGRAVITY…..1.25
Other Grade of Coil Cleaner :::
Coil Brite Rx Yellow - Part No.- RXSOL-16-1680-005 --- www.rxmarine.com/coil-brite
Coil Cleaner - Part No.- RXSOL-41-8672-025 --- www.rxmarine.com/Coil-Cleaner-RXSOL
Coil Cleaner ( Non Rinsing Type ) - Part No. - RXSOL-16-1697-025 --- www.rxmarine.com/coil-cleaner-non-rinsing
Condenser Coil Cleaner - Part No.- RXSOL-50-5015-025 --- www.rxmarine.com/Condensor-cleaner
Evaporator Coil Cleaner ::: Part No.- RXSOL-51-6004-025 --- www.rxmarine.com/evaporator-coil-cleaner
Coil Cleaner Free from ACID ::: Part No.- RXSOL-16-1082-025 --- http://rxmarine.com/Coil-Cleaner-Free-from-ACID
C-SHINE Alkaline coil cleaner ::: Part No- RXSOL-16-1668-025 --- www.rxmarine.com/C-SHINE-RXSOL-coil-cleaner
C SHINE coil cleaner specialized to remove dirt deposits, oily and greasy deposition from Condenser and Cooling coils. C-shine is specialized cleaning Chemical for Air Conditioner cleaning and Coil Cleaning.
C-Shine contains powerful selected alkaline additives with wetting agent and surfactant which helps to penetrates and remove dirt, grease and oil accumulation on evaporators and condenser coils quickly.
SPECIFICATION FOR SILICA GEL INDICATING (BLUE) / NON INDICATING (WHITE):
Loss on drying : | Not more that 5% mass |
Absorption Capacity : | 27% min on the basis of mass |
PH : | 3.5 to 8. |
Chlorides : | 0.05% by mass max |
Cobalt (as CoCl2) : | 0.4 by mass max |
Ammonium compounds (as NaH3): | 0.5% by mass max |
Sulphates (Na2SO4) : | 0.5% by mass max |
Packing: |
25 / 50 kgs M S drum (Smaller packing available). |
Item |
Specification |
||
95% |
92% |
30% |
|
Appearance 25`c |
White to yellowish powder of needle |
White to yellowish powder to needle |
Colorless to yellowish transparent liquid |
Odor |
Characteristic odor |
Characteristic odor |
Characteristic odor |
Active matter, % |
95.0 min |
92.0 max |
30+1 |
Petroleum ether soluble substance, % |
1.5 max. |
1.5 max. |
1.5 max. |
Sodium sulfate, % |
3.0 max. |
5.0 max. |
1.0 max. |
pH value (25`C , 1% Am.aq.sol) |
7.5-9.5 |
7.5.9.5 |
7.5.9.5 |
Color, Hazen (5%Am.aq.sol) |
10 max. |
10 max. |
10 max. |
Water content,% |
3.0 max. |
5.0 max |
/ |
Sodium Lauryl Sulfate (SLS) 95%
Appearance,25℃: White to yellowish powder or needle
Odor: Characteristic odor
Active matter, %: 95.0 min.
Petroleum ether soluble substance, %: 1.5 max.
Sodium sulfate, %: 3.0 max.
Ph value (25℃, 1% Am.aq.sol): 7.5-9.5
Color, Hazen (5% Am.aq.sol): 10 max.
Water content, %: 3.0 max.
Sodium Lauryl Sulfate (SLS ) 92%
Appearance,25℃: White to yellowish powder or needle
Odor: Characteristic odor
Active matter, %: 92.0 min.
Petroleum ether soluble substance, %: 1.5 max.
Sodium sulfate, %: 5.0 max.
Ph value (25℃, 1% Am.aq.sol): 7.5-9.5
Color, Hazen (5% Am.aq.sol): 10 max.
Water content, %: 5.0 max.
Sodium Lauryl Sulfate (SLS ) 30%
Appearance,25℃: White to yellowish powder or needle
Odor: Characteristic odor
Active matter, %: 30±1
Petroleum ether soluble substance, %: 1.5 max.
Sodium sulfate, %: 1.0 max.
Ph value (25℃, 1% Am.aq.sol): 7.5-9.5
Color, Hazen (5% Am.aq.sol): 10 max.
Water content, %: nill
Packing
Item |
Packing |
QuantityFCL |
N.W/FCL |
G.W/FCL |
SLS 95 or 92% |
20kgs/Bag |
525 Bags |
10.50MT |
10.763MT |
20kgs/Bag |
400 Bags |
8.00MT |
8.200MT |
|
SLS 30% |
200Kgs/Plastic Drum |
80 Drums |
16.00MT |
16.800MT |
1000Kgs/IBC |
18 IBCs |
18.00MT |
19.152MT |
SLS 95% or 92%:
1) 20kg/bag, 10.5mt/fcl (N.W.),10.763mt/fcl (G.W.) without pallet
2) 20kg/bag, 8mt/fcl (N.W.),8.2mt/fcl (G.W.) with pallet SLS 30%:
1) 200kg/plastic drum, 16mt/fcl (N.W.), 16.8mt/fcl (G.W.)
2) 1000kg/IBC, 18mt/fcl (N.W.), 19.152mt/fcl (G.W.)
Storage: Stored in dry, cool and ventilated place, kept away from sunshine and rain.