Buffer Cleaner
Oman Chemical is leading one Largest Supplier, Manufacture a
Product Code: RXSOL-43-4092-210
| Appearance : | clear, light green liquid |
| pH : | 3.5 |
| Density (kg/m3) : | 1030 |
| Solubility : | completely miscible in water |
| Flash Point : | none |
These data are to be seen as typical values and should not be considered as specifications.
Wear suitable protective gloves and safety goggles. In case of contact immediately flush with water. After eye contact seekmedicaladvice. If swallowed, drink large quantities of milk, egg whites or a gelatine solution. If these are not available, drink large quantities of water. Do not induce vomiting. Seek medical advice immediately. Small spills can be flushed with water. Large spills should be collected for disposal. Use Biosperse 250 safely. Always read label and product information (M.S.D.S.) before use.
Packaging
This product is available in a variety of packaging sizes.
Important Information
Typical Properties: Refer to the Material Safety Data Sheet (MSDS).
Regulatory Information
Refer to the MSDS or contact your sales representative for any additional regulatory and environmental information.
Safety
Use the health and safety information contained in the MSDS to develop appropriate product handling procedures to protect your employees and customers. Our MSDS should be read and understood by all of your supervisory personnel and employees before using.

Product Code: RXSOL-81-8186-025
OTHER PRODUCTS
Sodium Salt of 2-Acrylamido 2-methypropanesulfonic Acid (50% Aqueous Solution) also known as NaATBS CAS No. 5165-97-9
|
PARAMETERS
|
SPECIFICATIONS |
|
Appearance Water,Weight Percentage Density @ 25 C (77 F) Viscosity @ 25 C (77 F) pH @ 25 C (77 F) Colour APHA @ 25 C (77 F) Iron Inhibitor (MMEHQ)
|
Clear Colourless To Loght Yellow Liquid 48-52 1.20 - 1.21 Kg / Litre 14.0 cPs Max. 8.3 Min. 90 Max. 2 ppm Max. 65-90 ppm
|

Product Code: RXSOL-81-8184-210

Product Code: RXSOL-81-8182-210

Product Code: RXSOL-81-2105-210

Product Code: RXSOL-81-8195-210

Product Code: RXSOL-60-6216-025
Appearance (Colour)White
Solubility (Turbidity) 10% aq. solutionClear
Solubility (Colour) 10% aq. solutionColourless
Assaymin. 99%
Acidity (H2SO4)max. 0.2%
Sulphated Ashmax. 0.05%
Chloride (CI)max. 0.0005%
Iron (Fe)max. 0.001%
Heavy Metals (Pb)max. 0.002%
Manganese (Mn)max. 0.0005%
DNase, RNase, ProteaseNot detected
| C.A.S. | : 7727-54-0 |
| Molecular formula | : (NH4)2S2O8 |
| Molecular weight, g/mol | : 228.18 |
| Appearance | : White crystalline salt |
| APS content (typically) | : 99.2 % w/w |
| Active oxygen (typically) | : 7.0 % w/w |
| Acid content (based on H2SO4,typically) | : 0.05 % |
| Iron content | : 1 mg/kg |
| Bulk density | : 1100 g/l |
| Solubility in water at 10/20/40/60°C | : 550/620/700/835 g/l |
| pH of a 1% solution in water | : 4.0 |
| Decomposition of the product on temperature | : At above 60 °C |
| Moisture Content | : < 0.03 % |
Storage : Ammonium Persulfate is hygroscopic and must be stored under dry conditions. It has to be protected from direct sunlight and from any other source of heat.

Product Code: RXSOL-81-8193-210
Physical Properties :
| Appearance | : Liquid |
| Colour | : Dark Brown |
| Odour | : Amine |
| pH Value (Conc) | : 3.4-5.4 Viscosity 1-20 Cst @ 100f |
| Relative Density | : 1.01-1.21 @ 60f |
| Solubility |
: Soluble In Water |

Product Code: RXSOL-81-8191-025
| Appearance | Liquid |
| Colour | Brown Fluoroscent Greenish orange liquid |
| Solubility | Soluble In Water. |
| Melting Point | 0 °C |
| Relative Density | 1.0-1.07 @ 20c |
| Ph-Value, Conc. | 9-10 |
| Viscosity |
<5 Cps @ 20degc |

Product Code: RXSOL-81-8188-210
