Tank Cleaner-20 | Marine Chemicals,Tank Cleaning Chemicals,Water Chemicals Products,Cooling Water Treatment Chemicals

BALLAST WATER DISINFECTANT SDIC

Product Short Description: Dichlor is a chlorine compound used to purify swimming pool and spa water. Its full name is sodium dichloro s triazinetrione or dichloroisocyanuric acid.

Product Technical Specification:

Appearance	White Powder, Granular,
Chemical Name	Sodium Dichloroisocyanurate
Formula	C3O3N3Cl2Na
Chlorine	>62%
Molecular Weight	219.95
pH (1% solution)	6.0 to 7.0
Moisture	0.5 to 1.00% max
Solubility @ 25°C	Completely soluble in water
Density	Tap density = 0.974 g/mL

Remarks:

The requirements for pool water testing in the application of dichlor based products should be indicated on the product label. The primary parameter to be tested is the level of FAC in the water. The choice of testing methods will vary depending on the type of pool (residential or commercial) and local regulations and standards. The product label should recommend that the pool water quality be properly balanced. This requires testing of the pool water balance parameters of pH, alkalinity, calcium hardness, and stabilizer (i.e. cyanuric acid).

Images:

Caustic Soda Flakes

Product Short Description: White deliquescent solid, chiefly in the form of beads or pellets. Hazard: Corrosive to tissue in the presence of moiture. Strong irritant to tissue (eyes, skin, mucous membrane.) Used as a detergent.

Product Technical Specification:

Remarks:

Images:

Hydro Testing Oxygen Scavenger

Product Short Description: Hydro-testing corrosion protection for Pipeline, Tank

Product Technical Specification:

Form	Liquid
Colour	Colourless to slightly Yellow
Odour	Sharp
Flash Point	> 100C
Density	1.05-1.11 g/cm3 (25C)
pH	3 - 7

Non-Flammable

Safe Plant Handling
Low Odor
Provides corrosion protection in the liquid and the vapor phase
When used in hydrostatic testing the product provides protection in liquids below, above and at the liquid levels. Protection of recessed and hard to reach areas. Complicated valves and the interior surfaces of piping and equipment, which are often difficult or impossible to reach, are protected with true Vapor Corrosion Inhibitor action. Can be applied for hydrotest solution, metalworking fluids, coatings, adhesives and water treatment formulations.

Remarks:

Risk of serious damage to eyes. In case of contact with eyes, rinse immediately with plenty of water & seek medical advice. Wear suitable gloves and eye / face protection

Images:

Alkaline Cleaning Product

Product Short Description: RXSOL heavy duty detergents have proven to be a highly effective agent for maintaining effective levels of cleanliness and hygiene in cargo tanks and on other metal surfaces.

Product Technical Specification:

Remarks:

Images:

Bitumen Remover Cleaner

Product Short Description: Specifically formulated to reduce labour costs by swiftly breaking deposits enabling them to be easily flushed away with water. It can be diluted up to a maximum of 18-1 with paraffin or diesel, or for extra economy it can be diluted up to 6-1 with water.

Product Technical Specification:

Remarks:

Images:

Water Filter Corrosion Preventive

Product Short Description: Specially formulated, silica-based product for reducing corrosion normally associated with marine and offshore potable/fresh water storage systems. Use this product into the storage tank will form a protective barrier-type film on internal metal surfaces.

Product Technical Specification:

Appearance: Clear, viscous liquid

Specific Gravity at 25° C (77° F): 1.4

Flash Point (PMCC): None

Freeze Point: 0° C (32° F)

pH: 11.0

Future & Benefit

Features	Benefits
Odorless/tasteless	Recommended for potable/fresh water tanks
Concentrated liquid	Cost effective and Easy to apply
Forms protective silicate film	Protects potable and fresh water tanks against corrosion.Prevents red water conditions
Drinking Water Additives	Safe to use

Remarks:

Images:

OSPHO Cleaner

Product Short Description: International quality 45% pure Chemical.

Product Technical Specification:

PRODUCT NAME	:	PHOSPHORIC ACID
CAS number	:	7664-38-2
UN number	:	1805
Formula	:	H3PO4
Odour	:
Solubility in water	:	COMPLETE , ( 5.48 g/mL )
Density	:	1.834 at OC
Boiling point	:	213 OC
Melting point	:	42 OC
Viscosity	:	147 cP (100 %)
Flashpoint	:
Explosive limits	:
Vapour pressure	:	0 mbar at 20 OC
Skin absorption/irritation	:	YES
TLV Country NL Year 1995	:	ppm 1 mg/m3
Pollution category 1994	:	D

Properties :
- Molecular formula: H3PO4
- Molar mass : 98.00 g/mol
- Appearance : white solid or colourless, viscous liquid (>42 °C)
- Density : 1.885 g/mL (liquid)1.685 g/mL (85 % solution)2.030 g/mL (crystal at 25 °C)
- Acidity (pKa): 2.148, 7.198, 12.375

Remarks:

Images:

ALKAATUFF HOLD CLEAN

Product Short Description: Very effective Emulsifier - based cleaner for use in hold cleaning and general degreasing. its heavy molecular surfactants rapidly reacts with water and produce effective cleaning solution .May be applied by brush, hand spray and by high and low pressure

Product Technical Specification:

SPECIFICATIONS of PRODUCTS
•   Appearance   : Pale Clear Liquid
•   Specific gravity       : 1.065
•   Flash Point              : None
•   pH-value at 200C   : >12

Remarks:

For degreasing and removal of residues of minerals oil, coal stain and soot from the surface.

All chemical products should be handled with care. Protective clothing and respiratory equipment should be used where necessary.

Images:

LiveChat

Search form

BALLAST WATER DISINFECTANT SDIC

Caustic Soda Flakes

Hydro Testing Oxygen Scavenger

Alkaline Cleaning Product

Blast Off Alkaline

Bitumen Remover Cleaner

Water Filter Corrosion Preventive

OSPHO Cleaner

Plastic Sample Bottle 1000 ml

ALKAATUFF HOLD CLEAN

RX SOL

LATEST POSTS

Buffer Cleaner

Caustic Soda

Find Us

LiveChat