Categories: RIGS Oil Field-34
Images: Alt
Product Short Description: Heavy duty highly concentrated and economical emulsifier. Safe to use on most metal surfaces, painted and coated surfaces and also used as a multipurpose degreaserin extremely hard cleaning conditions.
Product Description:

Coldwash degreaser supplier and exporter.  Coldwash easily emulsifies oil grease from engineering and rigs platform and surface.

Product Application:

Ready to use for tank cleaning or general degreasing.


Complete removal of dirt, oil, carbonized grease, heavy oil, gum , vegetable oil , Lube oil, soot , asphalt ,paraffine, carbon stains etc. Gives clear finish to the surface. Highly effective for the removal of crude and other high melting point stains.
 

PROEDURE OF USE :

SPRAY METHOD

 Mix 1 part of RXSOL-20-2003-210 with 2 -10 parts of water / GAS-OIL ( For heavy oil,greasy surface use  directly)Spray directly on the entire surface to be cleaned. This can be achieved by Hand spray / mechanical spray pump. Immediately after 2 -5 minted of spray the RXSOL-20-2003-210  starts its function. The Dirt, oil grease etc will loosen. 5 to 6 minutes after spraying start rinsing the system with water   (High pressure recommended). Dirt and mud starts vanishing with cleaning media and water                                                                  

Immersion Method             

 Application in immersion process with or without ultrasonic support, manual wipping.

RE-circulation Method

 RXSOL-20-2003-210 is also used in conjunction with alkaline degreasing bath at 2-10% (v/v) concentration for better and quick degreasing action. Eithers the bath is heated to be 70°Cor the solution can be stirred or air agitated. FINALLY RINSE THE SYSTEM WITH FRESH WATER.
 
Product Dose:

Refer to technical datasheet.

Product Note:

Advantages :
RXSOL-20-2003-210 is easily soluble in water Action is quite fast even at low temperature which gives advantages of cleaning under operation And avoid shut down and down time.Non corrosive to most of the metals / plastics. Gives clear finish to the surface .Lower cost due to high concentration

Product Technical Specification:

 

Appearance      Clear amber brown liquid
Density In g/cm3 at 15°C: 0.95b
Flash Point  Above 70°C ( on dilution with water more than 90°C )
Compatibility  
Metal No known effect
Rubber  May swell
Synthetic rubber May swell
PACKAGING  Order No: RXSOL-20-2003-210 Size (in litres): 25,/30,/210
 
Remarks:

AVOID contact of  RXSOL-20-2003-210 with skin or eye Contact. If contact occurs wash with ample quantity of water. NOTE : on dilution RXSOL-20-2003-210 is more effective and safe for use on epoxy, polyurethane, zinc-silicate coatings and stainless steel.

prod_useful_area:
Product Supply Location:
stock-clearance.png