Buffer Cleaner
Oman Chemical is leading one Largest Supplier, Manufacture a
Your shopping cart is empty.
Product Code: RXSOL-81-8158-025
Typical Physical Properties
| Physical appearance | White powder |
| Specific gravity |
3.5 |
| Zinc content | 55% minimum |
| Solubility in water |
Insoluble |
Packaging and Storage
zinc carbonate is packaged in multi-wall, paper sacks; packing container sizes will vary based on local area of purchase.
Store in a dry location away from sources of heat or ignition, and minimize dust.
The initial treatment of zinc carbonate is usually 1.5 to 3 lb/bbl (3.75 to 8.0 kg/m3), depending on requirements. Subsequent field treatments should be based on approximately 1 lb/bbl (2.85 kg/m3) of zinc carbonate per 800 mg/L of sulfides detected.
One hundred kilograms (kg) of zinc carbonate reacts with approximately 25 kg of hydrogen sulfide. Use a Garrett Gas Train and proper Dräger tubes to measure the sulfide content. Zinccarbonate scavenger should be added through the hopper.
The product has a fine particle size and good dispersibility which minimizes reaction time. The use of excessively high pH (>11.5) should be avoided when using zinc carbonate scavenger in water-base fluids, as extreme viscosity increases are likely.
• Is not pH-dependent; it is effective at alkaline pH, such as 10 to 11, whereas iron materials are less so
• Helps remove the hazard of dangerous H2S gas escaping to the surface
• Lessens the possibility of hydrogen embrittlement occurring on downhole tubulars
• zinc carbonate can be used in oil- and synthetic-base fluids, but pilot testing is recommended
Product Code: RXSOL-81-8159-210
SPECIFICATIONS:
| Color: | Opaque white to yellow |
| Odor: | Sweet to Mild chemical odor Specific Gravity: 0.98 @25°C |
| Flash Point: | 200°F |
| pH (10%): | 5.63 |
| Solubility: | Water Dispersible |
Product Code: RXSOL-81-8162-260
Physical Properties :
Appearance : White Color
Solubility : Soluble in water, Increase the Solubility with temperature Insoluble in Alcohol.
pH (10% soln. at 25º) : 11 -11.5
Moisture : NMT 5%
Product Code: RXSOL-81-8174-025
Product Code: RXSOL-81-8173-220
PHYSICAL PROPERTIES:
| Appearance | :Colourless to Pale Yellow Color Homogeneous Liquid |
| pH | :3.0 – 6.0 |
| Viscosity | :< 100 CPS @ 25˚ C |
| Density | :1.00 ± 0.10 gm/ml @ 25˚ C |
| Solubility |
:Soluble in Water |
Product Code: RXSOL-81-8172-230
|
Appearance |
Colourless to Pale Yellow Color Homogeneous Liquid |
|
pH |
8.0 – 10.0 |
|
Viscosity |
< 200 CPS @ 25˚ C |
|
Density |
1.00 ± 0.05 gm/ml @ 25˚ C |
|
Solubility |
Soluble in Water |
|
Appearance |
Colourless to Pale Yellow Color Homogeneous Liquid |
|
pH |
8.0 – 10.0 |
|
Viscosity |
< 200 CPS @ 25˚ C |
|
Density |
1.00 ± 0.05 gm/ml @ 25˚ C |
|
Solubility |
Soluble in Water |
Product Code: RXSOL-81-8157-210
Characteristics
Product Code: RXSOL-81-8156-050
Chemical Composition :
| Caco3 | : | 48 % to 56 % |
| Mgco3 | : | 34 % to 43 % |
| Silica | : | 1.05 % |
| Cao | : | 31.08 % |
| Mgo | : |
20.10 % |
Product Code: RXSOL-81-8155-025
Avoid eye contact with vapors, mists, or spray. Wear Safety Glasses with Side Shields when eye contact is possible. Gloves not normally required. If prolonged or repeated skin contact is expected, gloves made from the following material(s) arerecommended: Neoprene, Nitrile Rubber. Dispense SLUDZA (Nonstop Cleaning Agent) 8 with cold water using the appropriate dispensing system into a buddy jug, Easy Scrub Express Systembottles, mop bucket or directly into an auto scrubber.
Product Code: RXSOL-81-8153-210
|
Form |
Liquid |
|
Appearance |
Clear liquid |
|
Flash Point |
>98.3° C |
|
Odor |
Characteristic |
|
pH |
6 – 8 |
|
Sp. Gravity |
1.05-108 |
We are marine chemical supplier since 1996.These Marine Chemicals include different sets of products such as Tank Cleaners, Maintenance Chemicals, Cooling Water Treatment Chemicals, Boiler Water Treatment Chemicals, Fuel Additives, etc.
Oman Chemical is leading one Largest Supplier, Manufacture a
Oman Chemical is leading one Largest Supplier, Manufacture a
