Buffer Cleaner
Oman Chemical is leading one Largest Supplier, Manufacture a
Your shopping cart is empty.
Iron Ore Red Dust Cleaner Usage Directions
Directions for Use
In general Dilute 1 part Iron Ore Red Dust Cleaner with 4 parts water and spray onto the surface being cleaned, And allow Iron Ore Red Dust for 20 to 40 Minutes to penetrate.
And For Hard Deposits Vigorously agitate the on the surface being cleaned with a stiff bristled brush or broom. And allow Iron Ore Red Dust for 20 to 40 Minutes to penetrate. Again, vigorously agitate the surface. The iron ore will begin to break up and be released from the substrate.
Stubborn areas may need to be again saturated and left for a further 10 minutes before vigorously agitating.
Rinse the surface with a high pressure washer or hose until all dissolved concrete and Iron Ore Red Dust Cleaner has been removed from the surface being cleaned.
Safety and Environment Safety Iron Ore Red Dust Cleaner is classified as a skin irritant in its concentrate form and is classified as nonhazardous for transport according to the Australian Dangerous Goods Code. This “non-DG” classification also means less regulated storage of Iron Ore Red Dust Cleaner containers on construction sites and industrial warehouses. Whilst Iron Ore Red Dust Cleaner displays a very low hazard profile for the user in terms of its effect on skin, eyes and respiratory system it is recommended to always wear protective gear including but not limited to chemical proof coveralls, goggles, gloves and rubber boots to minimize exposure to concrete residues and prolonged contact with Iron Ore Red Dust Cleaner
Biodegradation and Aquatic Safety Iron Ore Red Dust Cleaner is readily biodegradable, phosphate free and does not contribute to the eutrophication of waterways.
Waste Water Systems Red Dirt Buster has very low COD and BOD levels making it an excellent choice for use where wastewater processing systems are used. It is, however, recommended that pH readings be taken to ensure that wastewater pH readings comply with board recommendations
|
PRODUCT SPECIFICATION SHEET |
||
|---|---|---|
|
Muriatic Acid |
||
|
Parameters |
Specification Range |
Typical |
|
% Strength |
34.5 – 35.5 |
35.0 |
|
Specific gravity @ 60°F |
1.175 – 1.182 |
1.18 |
|
Degree Baumē (Bē) |
21.8 – 22.2 |
22.0 |
|
Iron (ppm) |
0.5 – 1.5 |
< 0.5 |
|
Color (APHA) |
N/A - 20 |
< 20 |
|
Total organic compound (ppm) |
N/A – 5 |
< 5 |
|
Lead (Pb) (ppm) |
N/A - 1 |
<1 |
|
Oxidizing substance (as cl2 ppm) |
N/A – 30 |
< 30 |
|
Reducing Substances (as SO3) |
N/A - 70 |
<70 |
|
Non-Volatile Residue (wt.%) |
N/A - 0.5 |
<0.5 |
|
Sulfate (SO4) (%) |
N/A - 0.5 |
<0.5 |
Before you remove stains and uses of Muriatic make sure to thoroughly protect yourself. personnel involved must wear full “Personal Protective Equipment”. using a designated cleaning kit.
|
|
|
|
Properties |
|
|
Molecular formula |
HCl in water (H2O) |
|
Molar mass |
36.46 g/mol (HCl) |
|
Appearance |
Clear colorless to light-yellow liquid |
|
Melting point |
−26°C (247 K) 38% solution |
|
Boiling point |
110 °C (383 K), 20.2% solution; |
|
Solubility in water |
Miscible |
|
Acidity (pKa) |
−8.0 |
|
Viscosity |
1.9 mPa s at 25° C, |
|
Flash point |
Non-flammable |
Safety
Hydrochloric acid in high concentrations forms acidic mists. Both the mist and the solution have a corrosive effect on human tissue, with the potential to damage respiratory organs, eyes, skin, and intestines. Upon mixing Muriatic acid with common oxidizing chemicals, such as bleach (NaClO) or permanganate (KMnO4), the toxic gas chlorine is produced. To minimize the risks while working with hydrochloric acid, appropriate precautions should be taken, including wearing rubber or PVC gloves, protective eye goggles, and chemical-resistant clothing.
Nitric Acid (68%) Safety Data Sheet
|
Chemical Identity
|
|
|
|||||||||||||||||||
|
|
|||||||||||||||||||||
|
Physical / Chemical Data
|
|
||||||||||||||||||||
|
|
|||||||||||||||||||||
|
Fire / Explosion Hazard Data
|
|
||||||||||||||||||||
|
Health Hazards / First Aid Measures
|
|
||||||||||||||||||||
|
|
|
||||||||||||||||||||
|
Preventive Measures
Spills |
|
Hazard: Dangerous fire risk in contact with organic materials. Highly toxic by inhalation, corrosive to the skin and mucous membranes. Uses :Organic synthesis (dyes, drugs, explosives, cellulose nitrate, nitrate salts ), photoengraving, etching steel.
Various colour with standard size.
OCCURS OR SYMPTOMS PERSIST.
| INTENDED USE |
DILUTION RATE (Concentrate : Fresh Water) |
BOXES PER HOLD |
HANDYMAX (per week) |
PANAMAX (per week) |
| Bilge Water (Acidic Water) Neutralizer | 1 : 23 (4 ltrs : 92 ltrs water) | 20-25 Ltrs | 100 Ltrs | 125 Ltrs |
FIRST AID MEASURES
SKIN : Wash exposed areas with water.
EYES : Flush eyes with plenty of water for 20 mins.
INHALATION : Remove patient to fresh air.
INGESTION : Do not induce vomiting.
Give patient a glass of water or milk.
GET MEDICAL ATTENTION IF ALLERGIC REACTION
We are marine chemical supplier since 1996.These Marine Chemicals include different sets of products such as Tank Cleaners, Maintenance Chemicals, Cooling Water Treatment Chemicals, Boiler Water Treatment Chemicals, Fuel Additives, etc.
Oman Chemical is leading one Largest Supplier, Manufacture a
Oman Chemical is leading one Largest Supplier, Manufacture a
