Paint and Cleaning solvent-18 | Page 4 | Marine Chemicals,Tank Cleaning Chemicals,Water Chemicals Products,Cooling Water Treatment Chemicals

BITUMEN PAINT

Product Short Description: A multi purpose bituminous product supplied in a paint consistency. Applicable as an adhesive primer, coating or for tree surgery. Good water, acid and alkali resistance. Suitable for protection of galvanised iron gutters, downpipes, metal railings and

Product Technical Specification:

Surfaces must be clean, dry and free from grease, oil, wax or any loose contaminating material.

New metal surfaces should be allowed to weather for a minimum of three months prior to coating.

Over rusted surfaces it is essential to remove loose rust or scale, wire brushing will do, prior to coating.

Appearance:	A thin black liquid, with a strong solvent odor
Solids Content:	Above 35%
Dangerous Goods Class:	3
Poisons Schedule Number:	5

Remarks:

Not suitable for use or as waterproofing membrane/coating.

Do not use in exposed situations, as U.V. rays can affect it. Therefore it must be overpainted with Ormonoid Silvershield.

Precautions should be taken to avoid skin or eye contact or swallowing the product.

Splashes or other accidental skin contact should be washed off immediately.

Wear safety glasses, overalls and impermeable gloves, e.g. PVC.

For a full MSDS contact your Davco state offic

Images:

Wood Varnish cleaner

Product Short Description: Cleaning of Wood varnish For general maintenance is tricky job, first of all wipe varnished wood with a soft dry cloth to remove dust. Then apply a RXSOL-15-1054-010 for complete remover of varnish from surface.

Product Technical Specification:

Remarks:

Images:

RXSOL H (Aromatic Hydrocarbon)

Product Short Description: RXSOL H is a low aromatic white spirit with a flash point above 61ºC, higher than conventional Low Aromatic White Spirit.

Product Technical Specification:

Property	Unit	Method	Value
Density @15°C	kg/l	ASTM D4052	0.785
Cubic Expansion Coefficient @20°C	(10^-4)/°C	Calculated	9
Refractive Index @20°C	-	ASTM D1218	1.437
Color	Saybolt	ASTM D156	+ 30
Bromine Index	mg Br/100g	ASTM D2710	200
Copper Corrosion (3hr @100°C)		ASTM D 130	1
Doctor Test		D 235	Negative
Non Volatile Matter	mg/100ml	ASTM D1353	1
Distillation, IBP	°C	ASTM D86	182
Distillation, EP	°C	ASTM D86	206
Relative Evaporation Rate (nBuAc=1)		ASTM D3539	0.05
Relative Evaporation Rate (Ether=1)		DIN 53170	200
Antoine Constant A #	kPa, °C		6.14569
Antoine Constant B #	kPa, °C		1636.33
Antoine Constant C #	kPa, °C		200.436
Antoine Constants: Temperature range	°C		+50 to +175
Vapor Pressure @20°C	kPa	Calculated	0.05
Saturated Vapor Concentration @20°C	g/m³	Calculated	3
Paraffins	% m/m	GC	47
Naphthenes	% m/m	GC	40
Aromatics	%v/v	ASTM D1319	12
Benzene	mg/kg	GC	< 3
Sulfur	mg/kg	SMS 1897	< 0.5
Flash Point	°C	ASTM D93	64
Auto Ignition Temperature	°C	ASTM E659	281
Explosion Limit: Lower	%v/v	-	0.7
Electrical Conductivity @20°C	pS/m	-	< 1
Pour Point	°C	ASTM D97	<-30
Surface Tension @20°C	mN/m	Du Nouy ring	26
Viscosity @25°C	mm²/s	ASTM D445	1.5
Hildebrand Solubility Parameter	(cal/cm³)^½		7.7
Hydrogen Bonding Index			0.5
Fractional Polarity			0
Heat of Vaporization @Tboil	kJ/kg		270
Heat of Combustion (Net) @25°C	kJ/kg		44500
Specific Heat @20°C	kJ/kg/°C		2.0
Thermal Conductivity @20°C	W/m/°C		0.14
Molecular Weight	g/mol	Calculated	158

For quality control analyses, local test methods may be applied that are different from those mentioned in this datasheet. Such methods have been validated and can be obtained through other. Rxsol H does not contain detectable quantities of polycyclic aromatics, heavy metals or chlorinated compounds.

Remarks:

Storage : Store Cool and Dry Palce. Keep Far away from direct flame.

Images:

Paint Remover 10 Ltr

Product Short Description: Excellent product for removal of paint from tough painted surfaces. Useful in the maintenance of all types of Industrial plant and in the oil field and marine industry.

Product Technical Specification:

Remarks:

Images:

Paint Remover 25 Kg(Liq)

Product Short Description: Excellent product for removal of paint from tough painted surfaces. Useful in the maintenance of all types of Industrial plant and in the marine industry.

Product Technical Specification:

Remarks:

Contact with skin can cause serous chemicals burns .Avoid contact with skin & eyes.Wear PVC gloves while handling. Do not take internally. Spl-ashes of the product or its solutions on the skin or clothing should washed immediately with cupious amount of water . If the eyes are affected should be washed with water for at least 15 minutes and seek medicals attention sought immediately.

Images:

Turbo Cleaner Dry Walnut Shell

Product Short Description: Walnut shell Soft Abrasive for turbo cleaning, filter media, Oil absorption, polishing gems and jewellery and many more.

Product Technical Specification:

Wide range of grades available, including custom orders
Gentle – clean surfaces without damaging underlying material
Porous – can be used to absorb contaminants
Organic: renewable and environmentally friendly
100% silica-free
Re-usable

Specification :
Physical Characteristics

Appearance:	Brown color, solid natural granules
Size:	1 - 1.5 mm. (new tolerance) Also refer above " Description " section
Corrosive action	None
Safety Risk / Advise	None
Specific Gravity:	1.2 – 1.4
Hardness:	3 on MOHS scale
Moisture:	NMT 11% by weight
PH:	7.5
GSA Specification:	AA‐1722 Type 2
Chemical Analysis ‐ % by weight	Nitrogen: .10 Specific Cellulose: 40/60 Lignin: 20/30 Toluene: .5/1.0 Solubility: 6.5
Military Specification:	MIL‐G=5634, Type 3
Methoxyl:	1.0
Chlorine:	1.5
Ash:	1.0

Remarks:

Offer Walnut Shell pieces/walnut shell powder for chemical industrial.

Processing walnut shell pieces, walnut shell powder with any size. We process a large quantity per month and packing as per inquiry.

Product: Walnut shell pieces
Origin: INDIA
Grade:
-walnut shell pieces
-small shell pieces
-walnut shell powder

Packing: 1MT/flexi bag or bulk or as customer’s request in 25 Kg

Supply Location : Fujairah, Mumbai, Kandla, Kolkata, Visakhapatnam, Dubai, Sharjah, Abudhabi
For Export Min quantity: 1x40feet (20MT)
For Local Supply : 25 Kg BAG

Images:

ISO PROPYL ALCOHOL N

Product Short Description: PROPYL ALCOHOL N

Product Technical Specification:

PRODUCT NAME	:	PROPYL ALCOHOL (N-)
CAS number	:	71-23-8
UN number	:	1274
Formula	:	CH3CH2CH2OH
Odour	:	ETHYL ALCOHOL LIKE
Solubility in water	:	COMPLETE
Density	:	0.804 at 20 ^oC
Boiling point	:	97 ^oC
Melting point	:	-127 ^oC
Viscosity	:	2.52 cp at 15 ^oC
Flashpoint	:	15 ^oC
Explosive limits	:	2.1 – 13.5 Vol%
Vapour pressure	:	19 mbar at 20 ^OC
Skin absorption/irritation	:	YES
TLV Country NL Year 1995	:	200 S ppm 500 S mg/m3
Pollution category 1994	:	III

Remarks:

Images:

Xylene

Product Short Description: Xylene

Product Technical Specification:

MIX XYLENE
Test	Unit	ASTM Methods	Results
Appearance		ASTM D-4176	Clear liquid, free from sediments & haze when observed at 18 to 26°C
Colour	APHA	ASTM D-1209	20 max.
Relative density @15.56/15.56°C	-	ASTM D-4052	0.865-0.877
Distillation		ASTM D-850	<1
IBP to DP	°C		7 max.
IBP	°C		136 min.
DP	°C		143 max.
Acid wash Colour	-	ASTM D-848	6 max.
Acidity	mg KOH / 100ml	ASTM D-847	none detected
Flash point	°C	IP - 170	22 min. (Able CC)
Total Aromatics HC (Meta Ortho Para Xylene, +EB)	wt%	ASTM D-2306	99 min.
Non Aromatics	wt%	ASTM D-2306	1 max.
Copper Corrosion	-	ASTM D-849	Pass (1A o 1B)
Total Sulphur	wt ppm	ASTM D-3120	Pass (1A or 1B)

Remarks:

Images:

LiveChat

Search form

BITUMEN PAINT

Wooden Polish Liquid

Vinyl Polish (Thermoplastic Floor Finish)

Wood Varnish cleaner

RXSOL H (Aromatic Hydrocarbon)

Paint Remover 10 Ltr

Paint Remover 25 Kg(Liq)

Turbo Cleaner Dry Walnut Shell

ISO PROPYL ALCOHOL N

Xylene

RX SOL

LATEST POSTS

Buffer Cleaner

Caustic Soda

Find Us

LiveChat