ANTI SCALANT for WASTE WATER

Size:

Color:

Product Short Description: ANTI-SCALANT FOR WASTEWATER TREATMENT SYSTEMS - SLUDGE LINE APPLICATION PHOSPHONATE-BASED
Product Technical Specification:

 

Appearance : Clear, dark yellow liquid
Density : 1.14 – 1.16 g/cm3
Viscosity : Approx. 50 mPa.s
pH-value : 4.8 – 5.3
Boiling Point : 105° C
Freezing Point : -10° C
Solubility in water : unlimited
Remarks:
Images: Alt



Potassium Permanganate Crystals Technical Grade

Size:

Color:

Product Short Description: Potassium Permagnate Also known as KMnO4, Condy’s Crystals and permanganate of potash
Product Technical Specification:

 

Odour : Odourless
Taste : Sweetish, astringent.
Appereance : Solid/Powder/Crystal
Molecular Weight : 158.03 g/mole
pH (1% soln/water) : Not available
Boiling Point : Not available
Melting Point : Decomposes.
 Critical Temperature : Not available.
Specific Gravity : 2.7 @ 15 C (Water = 1)
Solubility : Easily soluble in methanol, acetone. Partially soluble in cold water, hot water. Soluble in Sulfuric Acid.
 

Drinking Water treatment with Potassium Permagnate ::: http://www.dubichem.com/Drinking-Water-treatment-with-Potassium-Permagnate

Remarks:

Proceed with caution, however. The information provided in this article is intended for emergency situations only. Caution should be exercised when using any of the following information.

Potassium permanganate will start a fire when mixed with a couple of different compounds. Glycerin is the most common, but antifreeze will also do the trick. Antifreeze seems to create a reaction that is a little more violent. Be very careful when using either. The reaction is not always immediate. It can take several seconds for the reaction to start a fire – let it be.

After gathering all the necessary fire tinder and large pieces of wood to keep your fire going, place a teaspoon of Potassium permanganate on a flat surface. Carefully add the same amount of Glycerine or Antifreeze evenly on top of your pile. Next, stand back a couple of feet and wait at the ready with your tinder.

Mix sugar in with the Glycerin before adding to your Condy’s Crystals, and you’ll get a decent signal smoke.

For water purification, its use is relatively straight forward. First, if there is any sediment in the water, strain it out. Then add 3 – 4 crystals per liter of water. Stir or shake for a few seconds then let sit for 2 hours. The water should be a light pink (a concentration of 1:10,000) – no darker.

Here are some proportions for killing the different nasty organisms that can find their way into water:

Bacteria requires a minimum of 2.5mg per liter of water.
Viruses require a minimum of 50mg (close to danger levels) per liter.

Potassium permanganate can become toxic in high concentrations, just like anything. The lowest recorded instance of a person poisoned was 100mg per kilogram of body weight. That said, the LD50 scale for Potassium permanganate is 1900mg per kilogram of body weight.

Just remember, as long as it is pink – it’s probably ok to drink.

To use as an antiseptic, anti-fungal treatment, or emergency snow signal, add crystals one by one until the solution turns purple. Shake and use to flush out a wound, soak a fungal infection, or to leave a message in the snow.

Don’t eat snow marked in yellow – just saying.

Ideally, Potassium permanganate should be stored in a nonreactive plastic bottle with a Teflon coated cap. Most plastic bottles and non-coated caps should be fine.

Potassium permanganate is not a perfect option for any of the above-listed purposes. If other more convention options are available  – use them first. What it does do is offer another option should you find yourself with it as your only resource.

Hashtag: #MarineChemical #TankCleaner #OilFieldChemical #ChemicalManufacturer #ChemicalSupplier #WaterTreatmentChemical #ROchemicals #ReverseOsmosisChemical #Dispersant #Demulsifier #WaterlessHandCleaner #AirC
Images: Alt



Anionic Polyacrylamide Flocculant

Size:

Color:

Product Short Description: Polyacrylamide Flocculant to be used as flocculant in direct filtration process for settling of inorganic suspended solids, effluent water.
Product Technical Specification:

Properties : 

Form :Powder
Colour :Off-white
Odour :Odourless
Flash point :Not applicable
Flammability :Not flammable
Bulk density :Approx. 750 kg/m3
Self ignition :Not self-igniting
Explosion hazard :Not explosive
Fire promoting properties :Not fire-propagating
Solubility in water :Forms a viscous solution.
 
Remarks:
Hashtag: #MarineChemical #TankCleaner #OilFieldChemical #ChemicalManufacturer #ChemicalSupplier #WaterTreatmentChemical #ROchemicals #ReverseOsmosisChemical #Dispersant #Demulsifier #WaterlessHandCleaner #AirC
Images: Alt
Get MSDS
Get Technical Bulletin
Connect On Whats App



Anionic Polymer RXFLOC 124

Size:

Color:

Product Short Description: Anionic Polymer Rxfloc 124 is a powder form polyacrylamide based anionic polyelectrolyte. It consists of high negative charge. It is proficient in applications like solid-liquid separation in treatment of effluent water and mining.
Product Technical Specification:

 

Form         Solid
Colour White
Odour None
Odor Threshold Not Applicable
pH 6-8
Melting Point Not Applicable
Flash Point >100°C
Autoignition temperature >200°C
Vapour pressure (mm Hg)  0.13 @ 20°C

 

Remarks:
Hashtag: #MarineChemical #TankCleaner #OilFieldChemical #ChemicalManufacturer #ChemicalSupplier #WaterTreatmentChemical #ROchemicals #ReverseOsmosisChemical #Dispersant #Demulsifier #WaterlessHandCleaner #AirC
Images: Alt
Get MSDS
Get Technical Bulletin
Connect On Whats App



Ferric Chloride

Size:

Color:

Product Short Description: Ferric Chloride is inorganic compound having molecular formula FeCl3
Product Technical Specification:

Feric Chloride contains chlorine, so its characteristic smell is chlorine like hydrochloric acid odor. Due to presence of chlorine Ferric Chloride is Highly corrosive to most metals. 

Specification-
Ferric Chloride CAS NO.7705-08-0
SYSTEMATIC NAME :Ferric chloride
OTHER NAME :Iron(III) chloride, Iron tri chloride, Ferric trichloridde Anhydrous
EMPIRICAL FORMULA :FeCl3
MOLECULAR WT :162.2 g/mol
APPEARANCE :Dark greenish Black, Crystalline Powder extremely hygroscopic
SPECIFICATION :Ferric Chloride (as Fecl3) : 98.00 % min
Matter Insoluble in water :0.50 % max
Free Chlorine (as Cl) :0.01 % max
Ferrous Salts (as Fecls2) :0.10 % max
Sulphates (as SO4) :0.30 % max
Nitrates (as NO3) :0.05 % max
Zinc ( as Zn) :0.01 % max
Arsenic (as As203) :0.0005 % max
Alkalis and Alkaline earths :0.30 % max

Remarks:

Ferric Chloride is Noncombustible materials so esy to transport and storage.

Hashtag: #MarineChemical #TankCleaner #OilFieldChemical #ChemicalManufacturer #ChemicalSupplier #WaterTreatmentChemical #ROchemicals #ReverseOsmosisChemical #Dispersant #Demulsifier #WaterlessHandCleaner #AirC
Images: Alt
Get MSDS
Get Technical Bulletin
Connect On Whats App



Reverse Emulsion Breaker 2366

Size:

Color:

Product Short Description: Reverse Emulsion Breaker 2366 is a formulation of cationic polyelectrolytes and inorganic salts used in theclarification of oil field and industrial waste waters.
Product Technical Specification:

Typical Properties :

Form         Viscous Liquid
Appearance Clear Pale yellow, mobile liquid;
Odour Ammonical
Viscosity @ 20°C 400 - 800 cp
Flash Point >94°C
Boiling Point >100°C
Freezing Point -12°C
pH 3.5 - 4.10
Relative density 1.14 - 1.20
Water solubility Soluble
Remarks:
Hashtag: #MarineChemical #TankCleaner #OilFieldChemical #ChemicalManufacturer #ChemicalSupplier #WaterTreatmentChemical #ROchemicals #ReverseOsmosisChemical #Dispersant #Demulsifier #WaterlessHandCleaner #AirC
Images: Alt
Get MSDS
Get Technical Bulletin
Connect On Whats App



Aluminium Hydroxide ATH

Size:

Color:

Product Short Description: Aluminium Hydroxide is a non-abrasive powder with a Mohs' hardness index of 2.5 - 3.5 and a specific gravity of 2.42. Aluminium Hydroxide is considered as one of the largest volume flame retardant as it can be heated to 200°C and hydrated alumina can be d
Product Technical Specification:

 

Specification of Aluminium Hydroxide

Physical State

Odorless White Powder

Melting Point

300 degreeC

Specific Gravity

2.42

Solubility In Water

Insoluble

              pH                                     

Weak Basic

Vapor Density

Autoignition

NFPA Ratings

Health: 1; Flammability: 0; Reactivity: 0

Refractive Index

Flash Point Not Considered To Be A Fire Hazard

Al(OH)3

99.5% Min

Al2O3

64.0% Min

SiO2

0.015% Max

Fe2O3

0.02% Max

Moisture

0.3% Max

Loss On Ignition

34.0 - 35.0%

Whiteness

96% Min

Particle Shape

Platelet, Pseudo-Hexagonal

Average Particle Size                     

1 - 2 Microns

Remarks:
Hashtag: #MarineChemical #TankCleaner #OilFieldChemical #ChemicalManufacturer #ChemicalSupplier #WaterTreatmentChemical #ROchemicals #ReverseOsmosisChemical #Dispersant #Demulsifier #WaterlessHandCleaner #AirC
Images: Alt
Get MSDS
Get Technical Bulletin
Connect On Whats App



ALUMINIUM SULPHATE

Size:

Color:

Product Short Description: it can act as an coagulant, flocculant, precipitant and emulsion breaker. As coagulant and flocculant, aluminum sulfate successfully removes turbidity, suspended solids and colloidal color,reduces biochemical oxygen demand (BOD) and extremely clarifies po
Product Technical Specification:
 

Item

Index

Aluminum Sulfate

15.8%

17%

A12O3 % ≥

15.8

17

Iron Fe content % ≤

0.50

0.005

Water insoluble matter % ≤

0.15

0.15

PH value 1% aqueous solution ≥

3.0

3.0

Heavy metals as Pb % ≤

0.002

0.002

AS % ≤

0.0005

0.0005

Granularity ≥

-----

15

 

Item

Index

Aluminum Sulfate

15.8%

17%

A12O3 % ≥

15.8

17

Iron Fe content % ≤

0.50

0.005

Water insoluble matter % ≤

0.15

0.15

PH value 1% aqueous solution ≥

3.0

3.0

Heavy metals as Pb % ≤

0.002

0.002

AS % ≤

0.0005

0.0005

Granularity ≥

-----

15

 

Item

Index

Aluminum Sulfate

15.8%

17%

A12O3 % ≥

15.8

17

Iron Fe content % ≤

0.50

0.005

Water insoluble matter % ≤

0.15

0.15

PH value 1% aqueous solution ≥

3.0

3.0

Heavy metals as Pb % ≤

0.002

0.002

AS % ≤

0.0005

0.0005

Granularity ≥

-----

15

 

Remarks:

ALUMINIUM SULFATE Al2(SO4)3

Hashtag: #MarineChemical #TankCleaner #OilFieldChemical #ChemicalManufacturer #ChemicalSupplier #WaterTreatmentChemical #ROchemicals #ReverseOsmosisChemical #Dispersant #Demulsifier #WaterlessHandCleaner #AirC
Images: Alt
Get MSDS
Get Technical Bulletin
Connect On Whats App



Zeolite Granular

Size:

Color:

Product Short Description: Zeolites are microporous, aluminosilicate minerals commonly used as adsorbents
Product Technical Specification:
Remarks:
Hashtag: #MarineChemical #TankCleaner #OilFieldChemical #ChemicalManufacturer #ChemicalSupplier #WaterTreatmentChemical #ROchemicals #ReverseOsmosisChemical #Dispersant #Demulsifier #WaterlessHandCleaner #AirC
Images: Alt
Get MSDS
Get Technical Bulletin
Connect On Whats App



DEFOMAMINE 700

Size:

Color:

Product Short Description: DEFOMAMINE 700 is uniquely formulated to reduce foaming in amine systems using MEA, DEA, MDEA, DGA and formulated amine solvents.
Product Technical Specification:
Remarks:

Feature & Benefit :

  • DEFOMAMINE 700  has been proven to be more cost effective than silicone, polyglycol or alcohol based products.
  • In contrast to silicone based defoamers, DEFOMAMINE 700 does not increase equipment fouling, particulate filtration costs and the emulsification tendency of the amine.
  • In contrast to many polyglycol based defoamers, DEFOMAMINE 700 does not degrade to fatty acid soaps that increase foaming.
  • In contrast to alcohol based defoamers, DEFOMAMINE 700 does not degrade to organic acids. Superior foam control combined with negligible side effects make DEFOMAMINE 700 an excellent product to use for controlling foaming problems in aminen systems.
Hashtag: #MarineChemical #TankCleaner #OilFieldChemical #ChemicalManufacturer #ChemicalSupplier #WaterTreatmentChemical #ROchemicals #ReverseOsmosisChemical #Dispersant #Demulsifier #WaterlessHandCleaner #AirC
Images: Alt
stock-clearance.png