Ship Hold Cleaner-22

Sodium Hypo Chlorite 12-15 Percent

Product Short Description: High-test hypochlorite (HTH) is sold for chlorination of WATER

Product Technical Specification:

12.5% wt. SODIUM HYPOCHLORITE - EXTRA - PURE

Parameters	Specification Range	Typical
Sodium Hypochloriteas NaOCl (%wt)	12.5 - 13.2	13.0
Available Chlorine (%wt)	11.9 - 12.6	12.4
Available Chlorine (%vol)	14.3 - 15.3	15.0
Available Chlorine grams/liter	143 - 153	150
Excess Caustic (%wt)	0.25 - 0.80	0.30
Specific Gravity @ 60°F	1.197 - 1.220	1.210
pH	12.0 - 13.0	12.50
Iron (Fe) ppm	<0.5	0.05
Nickel (Ni) ppm	<0.2	0.02
Copper (Cu) ppm	<0.2	0.05
Mercury (Hg) ppb	0.001 - 0.003	0.002
Sodium Chloride (NaCl)%	<15.0	12.5

Appearance: Clear greenish-yellow liquid miscible in any proportion with water.
This product meets the requirements of NSF standard 60 for drinking water.

Remarks:

Sodium Hypo Chlorite

Electrolysis Process ( Pure & Concentrated )
This is an improved version of this method, known as the Hooker process, In the process, sodium hypochlorite (NaClO) formed when chlorine is passed into cold and dilute sodium salt solution. It is prepared with minimal separation between the anode and the cathode .The solution must be kept below 40 °C (by cooling coils) to prevent the undesired formation of sodium chlorate and to keep chlorine concentration up to 15%.

Chloro Alkali process ( Chlorine value is less )

E. S. Smith patented a method of sodium hypochlorite production involving electrolysis of brine to produce sodium hydroxide and chlorine gas, which then mixed to form sodium hypochlorite. This is known as the chloralkali process. Both electric power and brine solution were in cheap supply at the time, and various enterprising marketers took advantage of the situation to satisfy the market's demand for sodium hypochlorite. Bottled solutions of sodium hypochlorite were sold under numerous trade names.

Bye Products ::: NEVER use this product as it contains hazardous mixture.

This is bye products of HEAVY / Metal industries. During treatment of main products, huge quantities of SOD. HYPO Chlorite produce, with mixture of many unwanted toxic impurities . This is completely waste of the plant , but sold by traders to satisfy market demands.

Images:

Aquaa Clean Break

Product Short Description: New technology surfactant degreaser for removal of grease, oil, sludge, carbon deposits, general dirt and grime. designed to clean Animal / Vegetables oils, Fats, Hydrocarbon removes Dirt, Iink, Carbonized grease, Oil, Heavy oils etc.

Product Technical Specification:

Product Properties:-

Appearance	Pale yellow clear liquid
Odour / Solubility	NONE / INFINITE IN WATER.
Density	In g/cm³ at 15°C: 1.0 +/- 0.05
Compatibility
Metal Rubber	May Attack Zinc at concentrated solutions No known effect
pH Neat	10-11
Packaging	Order No:RXSOL-16-3003-025	Size Ltrs:25 , 210

Characteristics:-

Compatible with oily water separators.
Releasing the oil phase for reclamation. Suitable for all types of floors. Deodorizing nature
Eliminates the need to buy & stock duplicate productsdue to its effectiveness.
An economic highly concentrated product.
Also used for gas and hydrocarbon freeing of tanks. Free from caustic & hydrcarbon , Non flammable. Water based , Biodegradable .Safe to metal

Remarks:

Refer MSDS of Aqua clean break before its uses.
SPOT cleaning : Spray 20% concentration directly on SPOTED area and give 30 - 45 Minutes to work, Then finally rinse the surface area with WATER.

Images:

HCF Remover HD TANK Cleaner

Product Short Description: Especially formulated for tank cleaning where Hydro Carbon Free techniques are employed to soften up / remove baked on drying oils and also used after animal and vegetable oils, fish oils, tall oils,tug oil etc. It is low toxic product with an exceptional

Product Technical Specification:

Characteristics:

Removes grease, oil, carbon deposits, soil and grime.
Keeps loosened deposits in suspension preventing re-deposition.
Low toxic. , Non-flammable.
Free from hydrocarbon solvents.
Effective and economical in use , Water-based cleaner.
RXSOL-20-2013-210 has numerous cleaning applications including removal of greases, waxes, oil, sludge, soot, carbon deposits and general dirt and grime.
Non-corrosive to ferrous metals. Suitable for all tank-coatings.
Can be used for gas and hydrocarbon freeing of tanks.
Can be used for deodorizing
Contains wetting agents.

Note:- Completely miscible with sea water.

Remarks:

Keep Container tightly closed. And before using of this product refer our MSDS to avoid any critical problem.

Images:

Calcium Hydroxide

Product Short Description: Calcium Hydroxide pure powder

Product Technical Specification:

Chemical Characteristics

Parameter	Test Method	Test Result
Calcium Hydroxide Ca(OH)2	ASTM C-25	98.0 % min
Iron Oxide Fe2O3	ASTM C-25	0.30 % max
Aluminium Oxide Al2O3	ASTM C-25	0.20 % max
Sulfur S	LECO	0.16 % max
Insoluble matters		0.5 % max
Chloride ppm Cl	LECO	320 max
Magnesium Oxide MgO	LECO	0.7 % max
Phosphate ppm PO4	LECO	600 max
Silicon Oxide SiO2	LECO	0.50 % max
Carbon Dioxide, wt % CO2	LECO	0.85 % max
Humidity % H2O	ASTM D-95	1.0 % max.

Appearance	White Powder
Odor	Odorless
Density	2.211 g/cm3, solid
Calcium (Ca)	53.50%
Crystalline Silica	<0.1%
Acid Insoluble Substances	0.07%
Silica (SiO2)	0.2%

Remarks:

Products based on calcium hydroxide have a surprisingly wide variety of applications. The fact is that slaked lime has been used since time immemorial and with amazing results. Some of imprtant application as below -

Waste Water/Water Treatment
Construction
Flue Gas Treatment
Chemical Processes and Chemical Reactions
Petrochemicals
Calcium Salts (citrates, phosphates, stearates),
Acid Neutralization
Chemical Reactions
Calcium Enrichment (food, pharmaceutical, neutraceutical).

Calcium hydroxide can be found in the food industry providing calcium and as a pH modifier, as well as in the management of gases, as it has a high effectivity in the capture of acidic pollutants from industrial smoke and vapours. It is also an additive in feeds improving animal nutrition, and is used in animal-pens for its disinfecting power, lowering the number of pathogens and virus. In the sugar-industry it can be used to precipitate out impurities and to obtain purified sucrose.

It also brings benefits in sludge treatment as it is an exceptional aid in the elimination of micro-organisms and bacteria which at the same time neutralizes bad smells.Its properties are especially useful for water treatment, because it acts as a clarifier, a coagulant, a neutralizer and for the precipitation of dissolved pollutants.

Images:

Slip Barrier Coats HOLD BLOCK

Product Short Description: Polymer BASED non reactive coating materials which makes thin film barrier on surface after dry. Due to formation of RXSOL THIN barrier film on surface, the cleaning operation after unloading becomes quicker and easier with optimum results.

Product Technical Specification:

Product metal against corrosive cargo
Products paint against cargo penetration
Environmentally friendly
Safe to use in occupied / covered areas
Reduces turn around times
Easy to direct spray
If hold cleaning is to be performed from tank top level only powerful equipment designed for cargo hold cleaning will do the job in a minimum of time.
Effective cleaning chemicals that can dissolve stains and remove discoloring are required the crew needs to have effective equipment to apply these chemicals from tank top level personal proactive equipment is required depending on type and condition of hold paint chemical that protect the paint may also be needed
And don’t forget procedures have to be drown up and your
Crew trained for the job Standardization of equipment and chemical onboard you ship will make life easier for your seaman and save your time

Remarks:

Refer this link for complete set of HOLD CLEANING KIT ::: http://rxmarine.com/Ship-hold-cleaning-kit-set-supplier

SLIPcoat supplier in Sohar Muscat Oman, Fujairah Dubai UAE

What is Hold Block and why hold block application is better than LIME WASH?

When aggressive or corrosive dry bulk cargoes—such as fertilizers, salt, coal, or sulphur—come into direct contact with the metal surfaces of ship holds, they can cause rapid corrosion and surface degradation due to chemical reactions. This not only weakens the structural integrity of the vessel but also leads to costly repairs and safety risks.

To prevent such reactions and ensure long-lasting surface protection, a polymer-based protective coating is the ideal solution.

Why Use Polymer based HOLD BLOCK Coating in Cargo Holds?

Chemical Resistance
Acts as a barrier against corrosive cargoes, preventing direct metal contact and chemical reaction.
Easy Application
Applied by brush, roller, or spray before cargo loading. Forms a durable, even protective film.
Temporary or Voyage-Specific Use
Perfect for short-term voyages carrying highly reactive cargoes, allowing for easy cleaning and reapplication after discharge.
Prevents Pitting & Rust Formation
Shields steel from moisture, acidic residues, and abrasion, reducing long-term maintenance costs.

Field and Typical Applications of HOLD BLOCK

Sulphur
Salt
Phosphates
Urea
Coal & Petcoke
Cement
Bauxite

Why Hold Block is better choice than LIME COATING

Polymer-based water-resistant coating
Safe on all standard marine metal surfaces
Compatible with hold cleaning chemicals
Non-reactive, non-toxic, and easy to remove
Protects for the entire duration of cargo voyage

Recommended Use of Cargo Hold Block

Apply 1–2 coats uniformly across cargo hold surfaces prior to loading reactive cargo. For enhanced protection, focus on:

Tank tops
Bulkheads
Frames and internal structures
Hatch coamings

Cargo Hold Block Available Across Indian UAE Oman coastal:

UAE: Dubai, Fujairah, Abu Dhabi, Sharjah, Khor Fakkan
Oman: Muscat, Sohar, Duqm, Salalah
India: Mumbai, Kandla Mundra Jamnagar Sikka, Kolkata Haldia Paradip, Visakhapatnam, Chennai Manglore

Images:

HP Wash

Product Short Description: This is specifically formulated for use with high pressure advanced technology cleaning machine. Copmpatible with most painted surface and dries leaving a good shine. Quickly dissolves and removes grease and dirt deposits after emulsfication. Eco

Product Technical Specification:

Product Properties		Characteristics
APPEARANCE	Grennish liquid	Versatile for multi purpose cleaning.
DENSITY	In g/cm3 : 1.1 at 15°C	Cuts through heavy grease and grime
COMPATIBILITY		Economical – dilute for most cleaning needs
Metal	Avoid contact with aluminium, zinc, tin and their alloys. In concentrated stage .	Formulated for use with High Pressure cleaning machines. Non-flammable.
Rubber	May swell	Suitable with hot or cold high pressure eqp.
pH Neat	13 - 14	Free from caustic .
PACKAGING	RXSOL HP 3005 20/25/35/210 Lts	cleaning of cargo holds, tanks and refrigeration vessels. fishing vessels holds and machinery

Note:- After cleaning affects shining property. Can be used for cleaning of outside paintwork and decks .

**Read the Material Safety Data Sheet before using this product**

Remarks:

Images: