Buffer Cleaner
Oman Chemical is leading one Largest Supplier, Manufacture a
Your shopping cart is empty.
Product : D I Water. Tech Grade
|
Mol. Formula |
H2O |
|
M.W |
18.015 |
|
Conductivity |
< 2.0 μ S/CM |
|
PH |
6.00 – 7.50 |
|
Total Hardness |
< 0.2 mg/l as CaCo3 |
|
Chloride |
< 0.1 mg/l as Cl |
|
Total Alkalinity |
< 0.1 mg/l as CaCo3 |
|
Iron |
< 0.02 mg/l as Fe |
|
Copper |
< 0.03 mg/l as Cu |
|
Nickel |
< 0.01 mg/l as Ni |
|
Oxygen |
< 0.01 mg/as O2 |
|
Silica |
< 0.005 mg/l as SiO2 |
|
Substances reducing permanganate |
0.00004 |
A wide tolerance for the reaction is allowed because of the readiness with which water absorbs carbon dioxide from the air. Also complies withBS 3978 : 1987
RXSOL-20-2002-210 is an extremely effective liquid blend of concentrated emulsifier with penetrating agents,mild abrasives and wetting agents which makes this an excellent liquid scouring cleansers for cleaning and degreasing of double bottom,deep tanks etc which is used for fuel oils It can also be used for BOILERS,MARINE DIESEL ENGINE COOLING WATER SYSTEM and for local cleaning and degreasing of engine rooms on deck.
Direct Injection Method for Tank cleaning through SOLVENT TANKCLEAN EMULSIFY HEAVY DUTY TANK CLEANER :
Dose value of SOLVENT TANKCLEAN EMULSIFY HEAVY DUTY TANK CLEANER can varies depends up on contamination and deposition of oil on the surface area. For tank cleaning " direct Injection Method " also one of the popular method. In this method, neat SOLVENT TANKCLEAN EMULSIFY HEAVY DUTY TANK CLEANER can be injected directly from the drum through air-operated drum (barrel) pump. During this method this barrel pump can be connected to the pressure side of the automatic tank cleaning system line. Barrel Pump can be fixed at a predetermined rate as an injection rate of 0.1 0.2 liter SOLVENT TANKCLEAN EMULSIFY HEAVY DUTY TANK CLEANER per 100 litres of tank wash water is sufficient. Cleaning time 2-6 hours. Finally wash and rinse the tank with water.
Recirculation Method for ship tank cleaning -
1) First of all heat the remaining oil in tanks .
2) By stripping constantly. flush the tank with sea water,
3) Close all suction and discharge valves .
4) Then make solution SOLVENT TANKCLEAN EMULSIFY HEAVY DUTY TANK CLEANER with water with percentage ratio of 2-6% SOLVENT TANKCLEAN EMULSIFY HEAVY DUTY TANK CLEANER( 2 Ltr to 6 Ltrs in 100 Ltr Water ) concentration value can be increase as per cleaning demand and contamination and condition of tank. Circulate cleaning solution via the automatic tank washing system pump and heater to the tank to be cleaned, wherefrom the solution is returned to the chemical solution tank via the stripping line. The same solution can be repeated for 2 - 3 tanks, then new cleaning solution required if same solution repeated for more then 2-3 tanks. Finally after recirculation the tanks should be rinsed thoroughly with sea water or fresh water depending on availability and requirements.
Rock and Roll Method at sea cleaning for double bottom tank:
Use Handgloves, Goggles and safety mask before using in Tank. Keep container tightly closed and away from direct heat, fire and sunlight.
Product Properties:
|
Appearance |
Pale / Brownish liquid |
|
Density |
In g/cm3 at 20°C: Spec. Gravity : 1.035 |
|
Compatibility |
|
|
Metal |
No known effect |
|
Rubber |
No known effect |
|
pH |
Alkaline ( 12.7 - 13 ) |
|
Flash point |
Not Applicable |
|
Solubility |
100% soluble in water |
Wear safety Gloves and Eye protective Goggle.
| METHANOL | |||
| Test | Unit | Test Method | Results |
|
Purity |
wt% | ASTM E-346 |
99.98
|
|
Water
|
wt% | ASTM D-1364 |
0.0067
|
|
Ethanol
|
wt% | ASTM E-346 |
0.0044
|
|
Specific Gravity @20°/20°
|
- | ASTM D-4052 |
0.7925
|
|
Acetone
|
wt% | ASTM E-346 |
Less than 0.007
|
|
Permanganate time
|
- | ASTM D-1363 |
Greater than 50 ME
|
|
Non Volatile matter
|
- | ASTM D- 1353 |
Less than 0.0005gm
|
|
Distillation range @750 MMHG
|
DEGC | ASTM D-1078 |
0.4 including 64.5°
|
|
Colour, Pt-Cobalt scale
|
- | ASTM D-1209 |
Below 6 Apha
|
|
Carbonizable, Pt-Cobalt scale
|
- | ASTM E-346 |
Below 30 Apha
|
|
Clearance
|
- | - |
Clear and free from suspended matter
|
|
Odour
|
- | ASTM D-1296 |
Non-residual
|
|
Acidity as CH3COOH
|
wt% | ASTM D-1613 |
0.002
|
|
Iron
|
PPM | ASTM E-202 |
0.01
|
|
Chloride
|
PPM | ASTM D-512 |
0.01
|
|
Miscibility
|
- | ASTM D-1722 |
Passes test
|
|
Alkalidity ASNN3
|
wt% | ASTM D-1614 |
NIL
|
Use a strainer at the pump stack when circulating any solution.
Tank Lining – Stainless / Zinc / Epoxy / Phenolic (Extreme care must be taken if product other than bleach substitute is to be used in any coated space).
Characteristics: -
Note:- Completely miscible with sea water.
Cleans and brightens aluminium and copper.
Removes rust stains without risk to paintwork.
Safe on most common metals for Rust Removel & Passivation
We are marine chemical supplier since 1996.These Marine Chemicals include different sets of products such as Tank Cleaners, Maintenance Chemicals, Cooling Water Treatment Chemicals, Boiler Water Treatment Chemicals, Fuel Additives, etc.
Oman Chemical is leading one Largest Supplier, Manufacture a
Oman Chemical is leading one Largest Supplier, Manufacture a
