Buffer Cleaner
Oman Chemical is leading one Largest Supplier, Manufacture a

Chemical Properties :
|
Appearance |
: Dark Blue Powder |
|
Boiling Point |
: 501.1°C |
|
IUPAC Name |
: Sodium 1-Amino-9,10-Dioxo-4-(Phenylamino)-9,10- Dihydroanthracene-2-Sulfonate |
|
Melting Point |
: 223 °C |
|
Molar Mass |
: 416.39 g/mol |
|
Molecular Formula |
: C20H14N2O5S |
|
Solubility |
: 40 g/l |
STORAGE & HANDLING CONDITIONS:
- Store in a cool, dry, well-ventilated, out of direct sunlight.
- Keep away from sunlight and heat sources.
- Wash thoroughly after handling. Avoid contact with eyes. Avoid ingestion.
STORAGE REQUIREMENTS:
- Keep container tightly closed when not in use. Keep out of moisture.
- When using fork lift to load or lift the palletized bags, ensure that only competitive personnel are operating the forklift to avoid damage to the packing of the bags.
SAFETY PRECAUTIONS:
- Has harmful effect on skin and eye.
- After contact with skin and eye wash immediately with water. Avoid breathing the dust


|
Aromatic Content |
: 99.56 %wt |
|
Appearance |
: Clear, Free of Foreign Matter |
|
Benzene |
: < 10 ppm wt |
|
Non-Aromatics |
: 0.44 %wt |
|
Acidity |
: No Free Acid |
|
Copper Strip Corrosion |
: Pass 1A |
|
APHA Color |
: 3 |
|
Initial Boiling Point |
: 164.1°C |
|
Dry Point |
: 177.2°C |
|
Specific Gravity @ 15.6°C |
: 0.8763°C |
|
Density at 15°C (in Vacuum) |
: 0.8759g/mL |
|
Density at 15°C (in Air) |
: 0.8748g/mL |
|
Density at 30°C (in Air) |
: 0.8628g/mL |
|
Density at 30°C (in Vacuum) |
: 0.8639g/mL |
|
Total Sulfur |
: 0.1 ppm wt |

Appearance : Yellow to Green liquid
Content : 29-31 wt%
Density, : 20°C 1.185-1.205 kg/l
Na₂CO₃ : ≤ 0.5 wt%
Na₂S ≤ : 0.3 wt%

| PRODUCT NAME | : | CROTONALDEHYDE |
| CAS number | : | 123-73-9 |
| UN number | : | 1143 |
| Formula | : | CH3CH: CHCHO |
| Odour | : | PUNGENT, SUFFOCATING |
| Soluble in water | : | APPPRECIABLE |
| Density | : | 0.853 at 20 oC |
| Boiling point | : | 104 oC |
| Melting point | : | -74oC |
| Viscosity | : | |
| Flashpoint | : | 13oC |
| Explosive limits | : | 2.1 – 15.5 Vol% |
| Vapour pressure | : | 40 mbar at 20 oC |
| Skin absorption/irritation | : | YES |
| TLV Country NL Year 1995 | : | 2 ppm 6 mg/m3 |
| Pollution category 1994 | : | A |
Crotonaldehyde, stabilized appears as a clear colorless to straw colored liquid with a penetrating pungent odor.
Very toxic by inhalation.
May polymerize with the release of heat under exposure to heat or contamination. If polymerization takes place inside a container, the container may rupture violently.
Less dense than water. Vapors heavier than air.




