Buffer Cleaner
Oman Chemical is leading one Largest Supplier, Manufacture a
Your shopping cart is empty.
Product Code: RXSOL-40-4090-025
Physical Properties
Density 1.06
Packing, Type 25 Ltrs
Colour Colourless
Appearance Liquid
Product Code: RXSOL-40-4092-025
| Appearance : | clear, light green liquid |
| pH : | 3.5 |
| Density (kg/m3) : | 1030 |
| Solubility : | completely miscible in water |
| Flash Point : | none |
These data are to be seen as typical values and should not be considered as specifications.
Biosperse biocide for control of bacteria, fungi and algae in industrial water systems such as recirculating water systems, pasteurizers, air washer systems, membrane separation systems, coatings, emulsion polymers and adhesives. Biosperse 250 provides long lasting killing effects and is recommended in systems with a pH between 6-9,5. Biosperse 250 is easily detoxified so it can be applied even in environmentally sensitive areas.
Features
Is a broad-spectrum biocide, which very effectively controls spore and non-spore forming bacteria, SRB’s, Fe-bacteria, algae and fungi. Provides a long lasting killing effect, which enables less frequent biocide additions.
| Appearance : | clear, light green liquid |
| pH : | 3.5 |
| Density (kg/m3) : | 1030 |
| Solubility : | completely miscible in water |
| Flash Point : | none |
These data are to be seen as typical values and should not be considered as specifications.
Feeding
The quantity of Biosperse required for any given application will depend on such factors as the type and volume of the system, the extent of microbiological contamination and the degree of control required. Biosperse 250 may be fed directly from the drum or diluted with water and fed by any suitable chemical feed system. Biosperse should be dosed directly into the sump or basin or any location where good distribution can be assured.
Handling Precautions
Wear suitable protective gloves and safety goggles. In case of contact immediately flush with water. After eye contact seek medical advice. If swallowed, drink large quantities of milk, egg whites or a gelatine solution. If these are not available, drink large quantities of water. Do not induce vomiting. Seek medical advice immediately. Small spills can be flushed with water. Large spills should be collected for disposal. Use Biosperse safely. Always read label and product information (M.S.D.S.) before use.
Packaging
This product is available in a variety of packaging sizes.
Important Information
Typical Properties: Refer to the Material Safety Data Sheet (MSDS).
Regulatory Information
Refer to the MSDS or contact your sales representative for any additional regulatory and environmental information.
Safety
Use the health and safety information contained in the MSDS to develop appropriate product handling procedures to protect your employees and customers.
Product Code: RXSOL-40-4038-025
Physical Proeprties :
| Appearance | : Clear or slightly turbid aqueous solution, colorless or slightly yellow in color |
| Density (kg / m 3 ) | :1020 |
| pH | : 8.5 - 12.5 |
| Flash Point | : None |
| Freezing Point | : <+ 2 0 C |
| Solubility in Water |
: Cpmpletely soluble in water |
Very effective cleaner that is clear, yellowish green with anti fungal properties. Its a dispersing cleaner for the control of fouling smell by marine growth such as algae, shellfish, mussels, barnacles, micro-organisms and fungal growth in the sea water. Also effective in cleaning sides of cooling.
Product Code: RXSOL-60-6164-250
Product Code: RXSOL-40-4091-025
Physical Proerties
| Appereance | : Liquid |
| Colour | : Yellow |
| Odour | : None |
| Boiling Point | : 100 °C |
| Freezing Point | : 0 °C |
| pH | : 2.5 |
| Solubility In Water |
: Soluble |
Scale and Corrosion Inhibitor for Cooling Water Treatment chemicals.
Compatibility of Scale and Corrosion Inhibitor for Cooling Water
Product Code: RXSOL-40-4008-027
Chemical Type : Organic/Inorganic Chemical Compound (TCF).
Form : Liquid.
Specific Gravity : Ranges from 1.0 – 1.2 depending upon product
Solubility : Completely Soluble in Water.
Another very important reason for using RXSOL-40-4008-027 Biocides in cooling towers is to prevent the growth of Legionella, including species that cause legionellosis or Legionnaires' disease, most notably L. pneumophila, or Mycobacterium avium. The various Legionella species are the cause of Legionnaires' disease in humans and transmission is via exposure to aerosols—the inhalation of mist droplets containing the bacteria. Common sources of Legionella include cooling towers used in open recirculating evaporative cooling water systems, domestic hot water systems, fountains, and similar disseminators that tap into a public water supply.
RXSOL-40-4008-027 biocides function in eradication of sulfate reducing bacteria, aerobic and anaerobic bacteria that are formed and found in Cooling Tower Water.Micro Biocides are very vital for Closed and Open Circuit Cooling Water Treatment.
TCF (Totally Chlorine Free) micro biocides are compatible with heat transfer fluids (HTF) and can be used without any fear of corrosion of chlorine addition to the system or depletion or degradation of HTF and corrosion of PHE (plate type heat exchangers)
Product Code: RXSOL-40-4094-025
Appearance: Clear, viscous liquid
Specific Gravity at 25° C (77° F): 1.4
Flash Point (PMCC): None
Freeze Point: 0° C (32° F)
pH: 11.0
Future & Benefit
|
Features |
Benefits |
|
Odorless/tasteless |
Recommended for potable/fresh water tanks |
|
Concentrated liquid |
Cost effective and Easy to apply |
|
Forms protective silicate film |
Protects potable and fresh water tanks against corrosion.Prevents red water conditions |
|
Drinking Water Additives |
Safe to use |
Product Code: RXSOL-40-4040-060
Product Code: RXSOL-40-1630-025
|
Spec Item |
35%H2O2 |
50%H2O2 |
|
pH |
1.20~2.50 |
1.20~2.50 |
|
Purity wt% |
35~36 |
50~51 |
|
Specific Gravity 20/4℃ |
1.130min |
1.195min |
|
Free Acid as h2so4 wt% |
0.05max |
0.05max |
|
Residual wt% |
0.20max |
0.20max |
|
Stability % |
97.0min |
97.0min |
Keep locked up.. Keep container dry. Keep away from heat. Keep away from sources of ignition. Keep away from combustible material.. Do not ingest. Do not breathe gas/fumes/ vapor/spray. Never add water to this product. In case of insufficient ventilation, wear suitable respiratory equipment. If ingested, seek medical advice immediately and show the container or the label. Avoid contact with skin and eyes. Keep away from incompatibles such as oxidizing agents, reducing agents, combustible materials, organic materials, metals, acids, alkalis
Product Code: RXSOL-40-4037-210
Physical Properties :
| Physical State | : | Liquid |
| Appearance | : | Dark Red |
| Odor | : | Mild |
| Ph (100 %) | : | 11.2 - 12 Astm E-70 |
| Vapor Pressure | : | No Data Available. |
| Vapor Density | : | No Data Available |
| Specific Gravity | : | 1.17 - 1.2 (15.6 °C) |
| Density | : | No Data Available |
| Solubility In Water | : | Complete |
| Melting Point | : | No Data Available |
We are marine chemical supplier since 1996.These Marine Chemicals include different sets of products such as Tank Cleaners, Maintenance Chemicals, Cooling Water Treatment Chemicals, Boiler Water Treatment Chemicals, Fuel Additives, etc.
Oman Chemical is leading one Largest Supplier, Manufacture a
Oman Chemical is leading one Largest Supplier, Manufacture a
