Buffer Cleaner
Oman Chemical is leading one Largest Supplier, Manufacture a
Your shopping cart is empty.
Before handling the chemical products used in this process, the first aid and handling recommendations on the Material Safety Data Sheet for should be read, understood and followed. The industrial cleaning bath is strongly acid and can burn skin and eyes. Refer to the Material Safety Data Sheet for hydrochloric acid for recommendations for protective action.
| Form | Liquid |
| Colour | Colourless to slightly Yellow |
| Odour | Sharp |
| Flash Point | > 100 degree C |
| Density | 1.05-1.11 g/cm3 (25C) |
| pH |
3 - 7 |
Non-Flammable
Safe Plant Handling
Low Odor
Provides corrosion protection in the liquid and the vapor phase
When used in hydrostatic testing the product provides protection in liquids below, above and at the liquid levels. Protection of recessed and hard to reach areas. Complicated valves and the interior surfaces of piping and equipment, which are often difficult or impossible to reach, are protected with true Vapor Corrosion Inhibitor action. Can be applied for hydrotest solution, metalworking fluids, coatings, adhesives and water treatment formulations.
Risk of serious damage to eyes. In case of contact with eyes, rinse immediately with plenty of water & seek medical advice. Wear suitable gloves and eye / face protection
ACID inhibitor for HCl, Hydrochloric Acid.
Acids and corrosive materials are used to enhance production and to stimulate reservoirs therefore special care is required to ensure that casing, tubing strings and downhole equipment are not damaged. Blend of ACID with Acid corrosion Inhibitor RXSOL 213 protect your downhole equipment and metal tubulars.
TYPICAL PHYSICAL AND CHEMICAL PROPERTIES:
| Physical State | : | Liquid |
| Solubility in Water | : | Insoluble |
| Boiling Point | : | >190°F |
| Flash Point, COC | : | 190°F |
| Total Chlorine/Chloride, wt% | : | 0.00/0.00ppm |
| Appearance and Odor | : | Opaque/Chemical |
| Specific Gravity | : | 0.82 |
| VOC Content (ASTM D2369) | : | 58% |
| pH Concentrate | : | NA |
| Total Sulfur, wt% | : |
0.00 |
How Rust Preventive Works?
Corrosion Inhibitor for metal RUST Preventive rapidly displaces water from metal surfaces leaving a continuous polar protective film between the metal and water. This solvent-based rust preventive forms a durable protective layer on metal surfaces, effectively blocking moisture and oxygen. This corrosion & rust preventive provides strong adhesion, ensuring long-lasting corrosion resistance in harsh environments. It penetrates into pores and crevices, safeguarding even difficult-to-reach areas from rust formation. The product is easy to apply by spray, brush, or dip methods, leaving a thin, uniform film. Ideal for storage, shipping, and industrial use, it ensures metal components remain clean and rust-free.
This product also contails Benzotriazole , which is very effective effective corrosion inhibitor for copper and its alloys by preventing undesirable surface reactions. It is known that a passive layer, consisting of a complex between copper and benzotriazole, is formed when copper is immersed in a solution containing benzotriazole. The passive layer is insoluble in aqueous and many organic solutions. There is a positive correlation between the thickness of the passive layer and the efficiency of preventing corrosion. The exact structure of the copper-BTA complex is controversial and many proposals have been suggested.
AREAS OF APPLICATION :
•Automobile.
•Heavy Equipment.
•Generators, Marine Engines.
•Ship or Rig Equipment.
Keep in a tightly closed container in storage closed area . Recommended storage temperature is 500C
We are marine chemical supplier since 1996.These Marine Chemicals include different sets of products such as Tank Cleaners, Maintenance Chemicals, Cooling Water Treatment Chemicals, Boiler Water Treatment Chemicals, Fuel Additives, etc.
Oman Chemical is leading one Largest Supplier, Manufacture a
Oman Chemical is leading one Largest Supplier, Manufacture a
