Buffer Cleaner
Oman Chemical is leading one Largest Supplier, Manufacture a
Your shopping cart is empty.
Physical and Chemical Properties :
|
Appearance |
Colorless To Amber |
|
Physical State |
Liquid |
|
Specific Grav.(70F,21C) |
1.197 |
|
pH As Is (approx.) |
10.9 |
|
Odor |
Slight |
|
Flash Point P-M |
(CC) > 200F > 93C |
|
Vapor Pressure (mmHG) |
~ 18.0 |
|
Freeze Point (F) |
23 |
|
Vapor Density (air=1) |
~ 5.00 |
|
Freeze Point (C) |
-5 |
|
Viscosity(cps 70F,21C) |
99 % |
|
Solubility (water) |
100.0 |
|
Evaporation Rate |
(Ether=1) < 1.00 |
Materials Compatibility:
Corrosion-resistant equipment, such as PVC, should be used for the storage and preparation of this product. Pumping materials coming in contact with the concentrated or diluted products should also be corrosion resistant.
Packaging Information:
ORG MC 511 (Membrane Cleaner) is a liquid material, available in a wide variety of customized containers and delivery methods. Contact your GE representative for details.
Safety Precautions:
A Material Safety Data Sheet containing detailed information about this product is available upon request.
Product Specification:
|
Product Number: |
258148 |
|
CAS Number: |
7647-01-0 |
|
MDL: |
MFCD00011324 |
|
Formula: |
HCl |
|
Formula Weight: |
36.46 g/mol |
| TEST | Specification |
|
Appearance (Clarity) |
Clear |
|
Appearance (Color) |
Colorless |
|
Appearance (Form) |
Liquid |
|
Free from Suspended Matter or Sediment Color Test |
<_ 10 APHA |
|
Titration with NaOH |
<_ 0.01 ppm |
|
Arsenic (As) |
<_ 0.01 ppm |
|
Bromide |
<_ 0.005 % |
|
Iron (Fe) |
<_ 0.2 ppm |
|
Heavy Metals (as Pb) |
<_ 1 ppm |
|
Sulfate |
<_ 1 ppm |
|
Residue on Ignition (ppm) |
<_ 5 ppm |
|
Extractable Organic Substance Not Greater Than 5 ppm |
Pass |
|
Free Chlorine |
<_ 1 ppm |
|
Ammonium |
<_ 3 ppm |
|
Sulfite (ppm) |
<_ 1 ppm |
|
Meets ACS Requirements 10th Edition |
Current ACS Specification |
|
Storage Life |
3 Years |
First Aid
Eye Contact - The eyes should be immediately flushed with large amounts of water continuously for at least 15 minutes. Get immediate medical attention. It is necessary to hold the eyelids apart while flushing to ensure complete irrigation of the eye. Washing eyes within several seconds is essential to achieve maximum effectiveness. A delay of a few moments or incomplete washing can result in partial or permanent blindness. Never attempt to neutralize hydrochloric acid in the eyes with chemicals. Do not apply oils or ointments unless specifically prescribed by a physician.
Skin Contact - Flush the area of contact with large amounts of water. Contaminated clothing should be removed while underneath a safety shower. Get immediate medical attention. Do not attempt to neutralize the acid with alkaline solutions. No oils or ointments should be applied unless specified by a physician.
Inhalation – Remove individual to fresh air and get immediate medical attention. In cases of severe exposure, humidified oxygen should be administered by someone medically trained to administer oxygen. If respiration or pulse has stopped, have a trained person administer Basic Life Support (Cardio-Pulmonary Resuscitation and/or Automatic External Defibrillator) and CALL FOR EMERGENCY SERVICES IMMEDIATELY.
Ingestion - Get immediate medical attention. If individual is a fully conscious, give large amount of water. Do not use sodium bicarbonate in an attempt to neutralize the acid. Do not induce vomiting. Never give anything by mouth to an unconscious person.
Appearance: Clear to slightly yellow liquid
pH: Acidic
Specific Gravity: 1.20 ± 0.1
Solubility: Completely soluble in water
Odor: Mild characteristic odor
Packaging: Available in 25L, 200L drums, and 1000L IBCs
Suggestion ::: Our daily descaling works helps to share helpful tricks to dissolve hard scale easily, Always use 5-10 % our new generation hard scale deposit remover powder RXSOL-11-1102-025 . Addition of RXSOL-11-1102-025 helps to clean 100% scale from system .
#ScaleCleanerchemical
#ScaleMineralCleanerforMarineChemical
#ScaleDissolverChemicalManufacturerUAE
#ScaleDissolverChemicalManufacturerINDIA
#ScaleDissolverChemicalManufacturerOMAN
Compatibility:
Silica Scale remover is inhibited with corrosion inhibitors so it can be used on most common metals such as ms, ss, Cast Iron, Copper, copper alloys and aluminum but not on galvanized surfaces.
Silica scale deposits removal always be challenging task. RXSOL-11-1102-025 having strong new generation formula to clean process equipment.
Never use silca scale remover with glass equipment as this product has ability to dissolve glass or glasswares.
|
Appearance |
Yellowish powder |
|
Density |
in g/cm3 at 15°C: 1.2 |
|
Flash Point |
(PMCC) in °C: N/A |
|
pH |
in 10 wt-%: 1.1 |
|
Compatibility |
|
|
Metal |
Avoid aluminium, zinc, tin and their alloys and galvanised surfaces. |
|
Rubber |
No known effect. |
RXSOL DESCALE POWDER is chemical compound and should be handle with all chemicals handling precaution like use chemical protective goggle, Hand gloves etc... For more details pl. refer RXSOL product MSDS.
Formic acid is also used in place of mineral acids for various cleaning products such as limescale remover and toilet bowl cleaner.
Precaution to be taken while using in non-anodized aluminum.
We are marine chemical supplier since 1996.These Marine Chemicals include different sets of products such as Tank Cleaners, Maintenance Chemicals, Cooling Water Treatment Chemicals, Boiler Water Treatment Chemicals, Fuel Additives, etc.
Oman Chemical is leading one Largest Supplier, Manufacture a
Oman Chemical is leading one Largest Supplier, Manufacture a
