Flocculant Anionic Polymer DAF

Product Code: RXSOL-81-8163-220

Size:

Color:

Product Short Description: Effective as a flocculant in various liquid/solid separation applications, such as clarification, dissolved air flotation, and sludge dewatering of inorganic sludges.
Product Technical Specification:
 PHYSICAL STATE  Viscous liquid
 APPEARANCE  Off-white
 ODOR  Polymer
 SPECIFIC GRAVITY 1.07 @ 77 °F / 25 °C
 DENSITY  8.9 lb/gal
 VISCOSITY  925 cps @ 77 °F / 25 °C
POUR POINT  0 °F / -17.7 °C
 FREEZING POINT  -47 °F / 8.3 °C
 VOC CONTENT  27.9 % EPA Method 24
 

Ionic Character: Highly anionic
 

Remarks:

Usage: 

1.For industrial wastewater treatment and recycle. It has special efficacy for the Settlement of positive charge metal oxides.The usage amount is Just 1% of traditional flocculating agents and the efficiency is perfect. Such as steel mill,Metallurgical Plant and coal washery waste water. 
2.Settlement of river sediment / streamsediment
3.Retention and drainage aids, as well as dry strength agent in the Papermaking industry 

Images: Alt

Antioxidant A 1076

Product Code: RXSOL-81-8161-025

Size:

Color:

Product Short Description: It is an effective, non-discoloring stabilizer that provides excellent long-term heat stability by preventing thermo-oxidative degradation during processing and service life.
Product Technical Specification:

Appearance:                                      White Crystalline powder

Molecular Weight:                              530.9
Melting Range:                                  49 - 54°C
Color of Toluene Solution:                 25 APHA Max.
Color of Fusion:                                 60 APHA Max.
Volatile Matter:                                  < 0.5%
Ash                                                    < 0.1%
Solubility (10 g/100ml Toluene):        Clear (25C)
% Transmittance:                               425nm – 97% Min
                                                           500nm – 97% Min

Solubility: Solubility at 20 degree C (g/100ml solvent):

Solvent Solubility
Acetone 26%
Benzene 57%
Chloroform 57%
Cyclohexane 40%
Ethanol 1.5%
Ethyl Acetate 42%
n-Hexane 31%
Methanol 0.6%
Toluene 50%
Water < 0.01%

                                

Remarks:

Packaging:

Antioxidant A 1076 is available in powder form in a 25 kg  net weight, with an inner PE liner.

Storage:

This product may be stored up to two years in a sealed container. Containers should be stored in a cool, dry area. Extended storage at elevated temperatures or exposure to direct heat or sunlight could reduce product life. Keep containers sealed when not in use.

Toxicity & Safety:

This material is not intended for use in products for which prolonged contact with mucous membranes or abraded skin, or implantation within the human body is specially intended, unless the finished product has been tested in accordance with the Food and Drug Administration and/or other applicable safety testing requirements. Because of wide range of such potential uses, Rx Marine International is not able to recommend this material as safe and effective for such uses and assumes no liability for any such uses. Read and understand the Material Safety Data Sheet before using or handling this product.

FDA Regulations: Supplement

 

Existing Regulations Maximum Concentration Thickness Food Allowed Temperatures Allowed
Antioxidant for polymers,        
Olefin copolymers complying with 177.1520 (c), excluding primarily non-crystalline copolymers described in items 3.4 and 3.5 0.25% no restrictions no restrictions no restrictions
Olefin polymers complying with 177.1520 (c), item 3.4 0.25% no restrictions all foods for which polymer is approved no restrictions
Olefin polymers complying with 177.1520 (c), item 3.5 0.25% no restrictions non-fatty foods no restrictions
Adhesives complying with 175.105 no restrictions no restrictions no restrictions no restrictions
Semi-rigid and rigid acrylic and modified acrylic plastics complying with 177.1010 0.01% no restrictions no restrictions no restrictions
Semi-rigid and rigid acrylic and modified acrylic plastics complying with 177.1010 0.2% no restrictions foods containing no more than 15% alcohol no restrictions
Polystyrene and rubber-modified polystyrene complying with 177.1640 0.25% no restrictions

no restrictions except for fatty foods

In fatty foods the finished rubber modified polystyrene polymers shall contain not less than 85 weight percent of total polymer units derived from styrene monome

no restrictions
Acrylonitrile-butadiene-styrene copolymers (used in accordance with prior sanction or in compliance with 174-178 and 179.45) 0.5% no restrictions no restrictions no restrictions
Semi-rigid and rigid vinyl chloride plastics modified with methacrylate butadiene-styrene copolymers complying with 178.3790 0.05% no restrictions no restrictions no restrictions
Rigid polyvinyl chloride 178.3790 0.2% no restrictions no restrictions no restrictions
Polycarbonate resins complying with 177.1580 0.3% no restrictions no restrictions room temperature or below fill and storage
Ethylene-vinyl acetate copolymers complying with 177.1350 0.1% no restrictions no restrictions no restrictions
Nitrile rubber-modified acrylonitrile-methyl acrylate copolymers complying with 177.1480 0.2% no restrictions no restrictions 150°F max.
(as for polymer)
Styrene block polymers complying with 177.1810 0.3% no restrictions all foods for which polymer is allowed 150°F max.
Vinylidene chloride homopolymers and/or vinylidene chloride copolymers complying with regulations in Parts 175, 176, 177, 179, and 181. The vinylidene chloride copolymers shall contain not less than 50% of total polymer units derived from vinylidene chloride 0.2% no restrictions no restrictions no restrictions
Chlorinated isobutylene isoprene complying with 177.1420 (a) (3) 0.025% no restrictions no restrictions no restrictions
Rubber articles complying with 177.2600 0.5% no restrictions no restrictions no restrictions
Images: Alt

Zinc Carbonate

Product Code: RXSOL-81-8158-025

Size:

Color:

Product Short Description: The fine particle-size-distribution of zinc carbonate results in a maximum amount of surface area for fast, efficient sulfide scavenging and is effective in water-base and oil- or synthetic-base fluids.
Product Technical Specification:

Typical Physical Properties

Physical appearance White powder
Specific gravity

3.5

Zinc content 55% minimum
Solubility in water Insoluble
 

Packaging and Storage
zinc carbonate is packaged in multi-wall, paper sacks; packing container sizes will vary based on local area of purchase.

Store in a dry location away from sources of heat or ignition, and minimize dust.

Remarks:

The initial treatment of zinc carbonate is usually 1.5 to 3 lb/bbl (3.75 to 8.0 kg/m3), depending on requirements. Subsequent field treatments should be based on approximately 1 lb/bbl (2.85 kg/m3) of zinc carbonate per 800 mg/L of sulfides detected.

One hundred kilograms (kg) of zinc carbonate reacts with approximately 25 kg of hydrogen sulfide. Use a Garrett Gas Train and proper Dräger tubes to measure the sulfide content. Zinccarbonate scavenger should be added through the hopper.

The product has a fine particle size and good dispersibility which minimizes reaction time. The use of excessively high pH (>11.5) should be avoided when using zinc carbonate scavenger in water-base fluids, as extreme viscosity increases are likely.
• Is not pH-dependent; it is effective at alkaline pH, such as 10 to 11, whereas iron materials are less so
• Helps remove the hazard of dangerous H2S gas escaping to the surface
• Lessens the possibility of hydrogen embrittlement occurring on downhole tubulars
• zinc carbonate can be used in oil- and synthetic-base fluids, but pilot testing is recommended

Images: Alt

Demulsifier ORG

Product Code: RXSOL-81-8159-210

Size:

Color:

Product Short Description: Power of Chemical to break EMULSION in two phase hydrocarbon phase (oil) and a water-phase. Dosage and application will vary based on emulsion characteristics. For most crude or fuel oil based emulsions, a starting concentration of 0.1% at 165°F with a minimum heated recirculation contact time of 2
Product Technical Specification:

SPECIFICATIONS:

Color: Opaque white to yellow
Odor: Sweet to Mild chemical odor Specific Gravity: 0.98 @25°C
Flash Point: 200°F
pH (10%): 5.63
Solubility: Water Dispersible
Remarks:
Images: Alt

Potassium Silicate Solution

Product Code: RXSOL-81-8162-260

Size:

Color:

Product Short Description: Suitable for Oilfield applications include well conformance, cementing, treatment/remediation, and enhanced oil recovery.
Product Technical Specification:

Physical Properties :

Appearance : White Color

Solubility : Soluble in water, Increase the Solubility with temperature Insoluble in Alcohol.

pH (10% soln. at 25º) : 11 -11.5

Moisture : NMT 5%

Remarks:
Images: Alt

Iron Control Cetrol 300

Product Code: RXSOL-81-8174-025

Size:

Color:

Product Short Description: Iron Control
Product Technical Specification:
Remarks:
Images: Alt

Water Injection Bactericide (Aldehyde Type)

Product Code: RXSOL-81-8173-220

Size:

Color:

Product Short Description: Bactericide
Product Technical Specification:

PHYSICAL PROPERTIES: 

Appearance :Colourless to Pale Yellow Color Homogeneous Liquid
pH                                                                              :3.0 – 6.0
Viscosity  :< 100 CPS @ 25˚ C
Density :1.00 ± 0.10 gm/ml @ 25˚ C
Solubility :Soluble in Water
 
Remarks:
Images: Alt

Water Injection Bactericide (Amine Type)

Product Code: RXSOL-81-8172-230

Size:

Color:

Product Short Description: Amine Type Bactericide, a complex blend of Quaternary Ammonium Compounds and Ethoxylates Salts
Product Technical Specification:

 

Appearance  

Colourless to Pale Yellow Color Homogeneous Liquid

pH

8.0 – 10.0

Viscosity 

< 200 CPS @ 25˚ C

Density

1.00 ± 0.05 gm/ml @ 25˚ C

Solubility

Soluble in Water

 
Remarks:

 

Appearance

Colourless to Pale Yellow Color Homogeneous Liquid

pH

8.0 – 10.0

Viscosity 

< 200 CPS @ 25˚ C

Density

1.00 ± 0.05 gm/ml @ 25˚ C

Solubility

Soluble in Water

 
Images: Alt

Coil Tubing Lubricant

Product Code: RXSOL-81-8153-210

Size:

Color:

Product Short Description: Drilling Coil Tubing Lubricant is an effective friction reducer and drag reducer
Product Technical Specification:

 

Form

Liquid

Flash Point

>98.3° C

Odor

Characteristic

pH

6 – 8

Sp. Gravity

1.05-108

Solubility Completely Water Soluble

 

Remarks:

What are the advantages of using Coil Tubing Lubricant

  • Excellent friction reduction and drag control
  • Improves rate of penetration (ROP)
  • Enhances tubing life by reducing wear
  • Compatible with most water-based fluid systems
  • Effective in fresh water, brine, and hard water
  • Low foaming characteristics
  • Easy to mix and handle
  • Stable under wide temperature and pressure conditions
  • Environmentally acceptable (non-hydrocarbon based)
Images: Alt

Water Soluble Demulsifier

Product Code: RXSOL-81-8157-210

Size:

Color:

Product Short Description: Water soluble demulsifier is a totally organics surfactants solution with water and soluble in crude oil for the demulsification of oil in water,
Product Technical Specification:

Characteristics

  • Physical Appearance - Homogenous Liquid
  • Density - 0.9+-1.0
  • Solubility - Crude oil, water, methanol, ethanol, and acetone
  • Ph range - 6.0 to 8.0
  • Water solubility - Soluble
Remarks:
Images: Alt
stock-clearance.png