Rock Salt

Size:

Color:

Product Short Description: Odorless, white color free flowing crystals
Product Technical Specification:

Specification 

ROCK Salt  

Sodium Chloride 

NaCl 

odorless, white color free flowing crystals Solution with water will be transparent 

85% between 200 to 600 micron Sodium Chloride 99.6% Min on dry basis 

  • Total calcium salt as Ca by mass Maximum 0.04 % 

  • Total Magnesium salt as Mg by mass Maximum 0.04 % 

  • Total Sulfates as SO4 by mass Maximum 0.1 % 

  • Matter insoluble in water by mass Maximum 0.05 % 

  • Iron compound as Fe Maximum 5 ppm 

  • Non Caking agent Maximum 10 ppm 

  • Alkalinity as Na2CO3 Maximum 500 ppm 

  • Bulk density 1300 Kg/m3

  • Moisture Maximum 0.1 % 

  • PH of 10% solution 7.5 

Remarks:
Images: Alt



Drilling Fluid MMO MMH

Size:

Color:

Product Short Description: Mixed Metal Oxide (MMO/MMH), is blend of complex chemicals fundamentally different from conventional chemicals
Product Technical Specification:

APPEARANCE :                White/off white free flowing powder.
BULK DENSITY                1.0-1.1 gm/CC.
ODOR                               Oderless.
pH 1% Solution                 9.5-10.5.

Remarks:
Images: Alt



Drilling Foam RXSOL

Size:

Color:

Product Short Description: RXSOL DRILLING FOAM RX is a proprietary mixture of biodegradable surfactants and foam stabilizers which is designed to produce high performance foam using fresh, brackish and sea water for various drilling operations.
Product Technical Specification:

 

Appearance Liquid
State  Viscous liquid
Colour Clear to opaque
pH at 20oC±1°C 6.5 - 8.5
Specific Gravity at 20°C+1°C  1.0 ± 1.05
Pour point (-) 5°C

 

Remarks:
Images: Alt
Get MSDS
Get Technical Bulletin
Connect On Whats App



Asphaltene Inhibitor 2021

Size:

Color:

Product Short Description: ASPHALTENE INHIBITOR helps to control Asphaltene deposits that eventually stop oil flow.
Product Technical Specification:

 

 

 

SPECIFIC GRAVITY@ 20 C

0.851 g/cm3

SOLUBILITY IN WATER

Non Soluble

VAPOR DENSITY (Air=1)

No data

ODOR

Mild

%VOLATILES BY VOLUME @21°C (70°F)

94.3%

EVAPORATION RATE (n-BuAc=1)

<0.1 (nBuAc=1)

MELTING POINT / FREEZING POINT

-45°C (-49°F)

BOILING POINT  

153°C (302°F)

pH  

N/A

APPEARANCE and COLOR  

Light yellow liquid

VAPOUR PRESSURE, mm Hg  

0.2 hPa

Flash Point

64°C (147°F)


 

Remarks:
Images: Alt
Get MSDS
Get Technical Bulletin
Connect On Whats App



Vanadium Inhibitor HFO Fuel Additive GT

Size:

Color:

Product Short Description: Vanadium Inhibitor is specially designed for gas turbine
Product Technical Specification:

 

Appearance  : Liquid
Colour    : Brown to dark bown
Flash Point,COC°C  : 65°C
Specific Gravity 16°C : 1.04 - 1.05
pH Value @ 25°C :  5 - 10
Pour Point : -18°C
Viscosity,mm2/s@  38 °C  : 10 to 30
Water and Sediment (Vol%) : 5 - 10
Magnesium %  :  > 20 Min

 

Remarks:
Images: Alt
Get MSDS
Get Technical Bulletin
Connect On Whats App



ZINC Bromide Solution

Size:

Color:

Product Short Description: Zinc Bromide is a clear, solid-free brine fluid
Product Technical Specification:
Remarks:
Images: Alt
Get MSDS
Get Technical Bulletin
Connect On Whats App



Silica Flour

Size:

Color:

Product Short Description: Silica flour
Product Technical Specification:
Remarks:
Images: Alt
Get MSDS
Get Technical Bulletin
Connect On Whats App



Acrylamide Acrylic Amide

Size:

Color:

Product Short Description: Acrylamide is a chemical used in industries such as the paper and pulp, construction, foundry, oil drilling, textiles, cosmetics
Product Technical Specification:

Product name:Polyacrylamide

Mf:(C3H5NO)n 

CAS NO.:9003-05-8

EINECS No.:201-173-7

Other name:Polyacrylamide absorbent Gel; Polyacrylamide solution; Acrylamide resin ,pam/cpam/apam/polyacrylamide/cationic polyacryamide/anionic polyacrylamide.; 

Acrylamide resin (high M.Wt.); Acrylamide gel solution; Polyacrylamide,hydrolyzed; Polyacrylamide; PAM

Appearance:white powder or granule

Polyacrylamide is, simply called PAM, a water- soluble high polymer and widely used in petroleum, paper-making, metallurgical, textile, chemical and environment protection fields. There are three categories of anionic, cationic and non-ionic type. 

Polyacrylamide according to different uses and users of the product performance requirements can choose to use different molecular weight.

Remarks:
Images: Alt
Get MSDS
Get Technical Bulletin
Connect On Whats App



MPG Antifreeze Heat Transfer Liquid

Size:

Color:

Product Short Description: Heat Transfer water mix propylene glycol liquid
Product Technical Specification:

 

Main Ingredients   : PROPYLENEGLYCOL (1,2-) 94%
Inhibitors and
water
 
6
Inhibitors and water
: 6 %
Colour Bright : Clear
pH of solution : 8.8
Odour            : PRACTICALLY ODOURLESS
Solubility in water        : SOLUBLE
     
Boiling point         : 162 oC
Freezing point       : -32 oC
Viscosity     : 58.1 cp at 20 oC
Reverse Alkalinity         : Minimm 15.0 ml
Vapour pressure    : .07 mbar at 20oC
Skin absorption/irritation       : YES
TLV       Country     :  
Pollution category    1994       : III
 

 

Remarks:

Propylene glycol is tolerated well by the skin and shouldn't cause redness or irritation. Propylene glycol is a penetration-enhancing humectant.
 

Propylene Glycol USP is a widely used ingredient in pharmaceutical, food, cosmetic, personal care, flavors and animal feed applications; an overview of typical uses of Propylene Glycol USP as below.It must be emphasized that it is the user’s responsibility to consult area and country-specific regulations for details of approved use.

  1. Pharmaceuticals - Solvent for active ingredients in oral, and topical products.
     
  2. Cosmetics & Personal Care - Solvent, coupling agent, carrier, emulsion stabilizer, softening agent, viscosity modifier and humectant in many types of cosmetics and personal care products such as skincare, sun care, shampoo, bath/shower products, toothpastes, mouthwashes, shaving products and baby care products.
     
  3. Flavors & Fragrances - Solvent and extraction solvent of flavors and fragrances for applications in food, beverages, perfumes and cosmetics.
     
  4. Food - Various applications as a direct food additive (E 1520) such as a carrier or carrier solvent for colors, emulsifiers, antioxidants and enzymes (in Europe with maximum 1 g/kg in human foodstuffs), and humectant and stabilizer in fruits, vegetables and bakery goods (except in Europe). Propylene Glycol USP is also applied in indirect contact food applications, such as a low temperature heat-transfer fluid in the brewing, dairy and ice cream industries and for food storage facilities, an equipment cleaner fluid or a solvent for printing inks.
     
  5. Pet foods & Animal Feed - Humectant, emulsifier, preservative, solvent foradditives, energy source and aid for prevention of ketosis (acetonemia) in dairycattle. In EMEA a specific tailor made Propylene Glycol Animal Feed is offered forthis application.
Images: Alt
Get MSDS
Get Technical Bulletin
Connect On Whats App



Oil Based Mud Lubricant GLOLUBE

Size:

Color:

Product Short Description: Oil Based Mud Lubricant is an oil-soluble additive specifically engineered for use in all invert-emulsion drilling fluids to decrease the coefficient of friction.
Product Technical Specification:

Physical Properties:

Appearance                             : Brownish Black Liquid
Specific Gravity  : 0.90 to 0.95
PH  : Neutral
Solubility  : Slightly Dispersible in water, Soluble in Oil
Thermal Stability :  >160oC
Lubricity Coefficient :  <0.20
Remarks:
Images: Alt
stock-clearance.png