Hold Solution-22 | Page 2 | Marine Chemicals,Tank Cleaning Chemicals,Water Chemicals Products,Cooling Water Treatment Chemicals

Hold Clean XF

Product Short Description: Aqueous Mixture Specifically formulated for the cleaning of ship cargo hold - heavy duty residues. And also can be applied by high pressure spraying equipment. Stock- Vizag, Mumbai, Chennai, Kandla, Kolkata, Fujairah, Dubai

Product Technical Specification:

Physical Properties

Appearance Clear Liquid

Odour Soft

Boiling Point 109 °C

Flash Point None

pH 12-13

Solubility Soluble in Water

Remarks:

Keep tightly closed coantainer. Avoid direct concentrated product contact with any part of BODY skin. The most important things HOLD BRITE RXSOL doesn't release any gases or smell, this uniquness of product kept in safe category.

Images:

IRON ORE RUST REMOVER

Product Short Description: Excellent pre treatment and binder for metal surfaces to be painted. Concentrated blend of RXSOL proprietory formulated various products, which is specifically designed for the rapid removal of rust, while providing phosphatized ferrous metal surface.

Product Technical Specification:

Remarks:

Images:

CARGO Clean Heavy Duty

Product Short Description: Heavy duty Alkaline Cleaner for cargo containing specially selected surfactant and powerful long chain organic syndet , specific salts with surfactants & wetting agents .

Product Technical Specification:

Product Properties:

Appearance	Pale / brownish liquid
Density	In g/cm3 at 20°C: Spec. gravity : 1.035
Compatibility
Metal	No known effect
Rubber	No known effect
pH	Alkaline ( 12.7 - 13 )
Flash point	Not Applicable
Solubility	100% soluble in water
Packaging	Size (in Litres) : 25, 50, 210 Ltr

Remarks:

Images:

PRELOAD Slip HOLD BLOCK

Product Short Description: Polymer BASED non reactive coating materials which makes thin film barrier on surface after dry. Due to formation of RXSOL THIN barrier film on surface, the cleaning operation after unloading becomes quicker and easier with optimum results.

Product Technical Specification:

Product metal against corrosive cargo
Products paint against cargo penetration
Environmentally friendly
Safe to use in occupied / covered areas
Reduces turn around times
Easy to direct spray
If hold cleaning is to be performed from tank top level only powerful equipment designed for cargo hold cleaning will do the job in a minimum of time.
Effective cleaning chemicals that can dissolve stains and remove discoloring are required the crew needs to have effective equipment to apply these chemicals from tank top level personal proactive equipment is required depending on type and condition of hold paint chemical that protect the paint may also be needed
And don’t forget procedures have to be drown up and your
Crew trained for the job Standardization of equipment and chemical onboard you ship will make life easier for your seaman and save your time

Remarks:

Refer this link for complete set of HOLD CLEANING KIT ::: http://rxmarine.com/Ship-hold-cleaning-kit-set-supplier

Images:

Alkaleen Extra Heavy Duty

Product Short Description: Highly concentrated Alkaline Cleaner is a superior Heavy duty Ship Hold Cleaning Chemicals with an exceptional solvency power on soil & oily matter

Product Technical Specification:

Product Properties:

Appearance	Pale Yellow brownish liquid
Density	In g/cm3 at 20°C: Spec. gravity : 1.035
Compatibility
Metal	No known effect
Rubber	No known effect
pH	Alkaline ( 12.7 - 13 )
Flash point	Not Applicable
Solubility	100% soluble in water

Remarks:

Wear safety Gloves and Eye protective Goggle.

Images:

Sodium Hypo Chlorite 12 to 15

Product Short Description: High-test hypochlorite (HTH) is sold for chlorination of WATER

Product Technical Specification:

12.5% wt. SODIUM HYPOCHLORITE - EXTRA - PURE

Parameters	Specification Range	Typical
Sodium Hypochlorite as NaOCl (%wt)	12.5 - 13.2	13.0
Available Chlorine (%wt)	11.9 - 12.6	12.4
Available Chlorine (%vol)	14.3 - 15.3	15.0
Available Chlorine grams/liter	143 - 153	150
Excess Caustic (%wt)	0.25 - 0.80	0.30
Specific Gravity @ 60°F	1.197 - 1.220	1.210
pH	12.0 - 13.0	12.50
Iron (Fe) ppm	<0.5	0.05
Nickel (Ni) ppm	<0.2	0.02
Copper (Cu) ppm	<0.2	0.05
Mercury (Hg) ppb	0.001 - 0.003	0.002
Sodium Chloride (NaCl)%	<15.0	12.5

Appearance: Clear greenish-yellow liquid miscible in any proportion with water.
This product meets the requirements of NSF standard 60 for drinking water.

Remarks:

Sodium Hypo Chlorite

Electrolysis Process ( Pure & Concentrated )
This is an improved version of this method, known as the Hooker process, In the process, sodium hypochlorite (NaClO) formed when chlorine is passed into cold and dilute sodium salt solution. It is prepared with minimal separation between the anode and the cathode .The solution must be kept below 40 °C (by cooling coils) to prevent the undesired formation of sodium chlorate and to keep chlorine concentration up to 15%.

Chloro Alkali process ( Chlorine value is less )

E. S. Smith patented a method of sodium hypochlorite production involving electrolysis of brine to produce sodium hydroxide and chlorine gas, which then mixed to form sodium hypochlorite. This is known as the chloralkali process. Both electric power and brine solution were in cheap supply at the time, and various enterprising marketers took advantage of the situation to satisfy the market's demand for sodium hypochlorite. Bottled solutions of sodium hypochlorite were sold under numerous trade names.

Bye Products ::: NEVER use this product as it contains hazardous mixture.

This is bye products of HEAVY / Metal industries. During treatment of main products, huge quantities of SOD. HYPO Chlorite produce, with mixture of many unwanted toxic impurities . This is completely waste of the plant , but sold by traders to satisfy market demands.

Images:

ALKAATuff High Foam CLEANER

Product Short Description: Very effective alkaline ship hold cleaner also can be use as multi purpose ship hold cleaning and general digressing agent. Stock available at - Kandla, Mumbai, Ennore - Chennai, Visakhapatnam - Gangavaram, Kolkata, Haldia, Fujairah

Product Technical Specification:

Tips for Hold cleaning - Prior to high pressure hold washing, excess cargo residue on the tank top should be removed by hand sweeping and lifted out of the holds via the use of a portable mucking winch. After all excessive cargo residue has been removed then the holds can be washed with salt water using a highpressure hold cleaning gun, supplemented by the deck air line to provide increased pressure. This is the most commonly used method of hold cleaning. Then use ALKAATUFF High Foam CLEANER hold cleaning Marine Chemicals. Cleaning Chemicals; Cargo Hold Cleaning detergent to get optimum result.

Remarks:

Hold Cleaning Preparation and Method :

Preparing Cargo Holds for loading Grain depends on the previous cargo.

1. Cargo Holds must be thoroughly cleaned and dry and trace of previous cargo in frames,

beams, girders, and other structure.

2. There should not be any loose rust and or paint scale anywhere in the Cargo Holds,

Bulkheads, upper and lower hopper spaces, underneath of Hatch Covers and tank top.

3. There should not be traces of live & dead insect & weevils.

4. Bilge covers should be cleaned of any cargo residues and have enough drain holes. Bilge

cover needs to be grain tight but not watertight.

5. Bilge well should be cleaned of previous cargo dray and odour free.

6. Bilge suction should be operational at all the times.

Removal of cargo residue:

Air Blow from top using high pressure air to reach all accessible corners. Cargo to be swept,

scrapped & collected in a drum. Attention to be given

• Australian ladder and its platforms and stanchions

• Beams and girders under cross decks

• Frames, beams, girders, and other structure

• Large pipes holding brackets behind the pipes

Then Cleaning and sweeping coal cargo from the hold as maximum possible by HELPER / Crew member

Loose Rust & Paint Scale:

A sharp hand scraper shall be used to take off the peeling rust & paint scale

Special attention to following areas:

• Australian ladder and its platforms, hand rails and stanchions

• Australian ladder and its platforms and stanchions

• Beams and girders under cross decks

• Frames, beams, girders, and other structure

• Large pipes holding brackets behind the pipes

• Hatch coamings and under hatch covers

• Booby hatches & cover

Tank top loose rust

Tank top should be free of loose rust and cargo residue

Any rust which can be scraped by hand scrapers should be removed.

The tank top should be rinsed with fresh water

Cleanliness of cargo hold bilges :

Hold bilges must be cleaned thoroughly to remove all residue, rust particles and cargo stains etc.

The filter (Rose Box) must be cleaned thoroughly

The bilge well sections shall be washed with continuous running of sea water to remove all odour and later rinsed with fresh water

Images:

ALKAATUFF ALKALINE

Product Short Description: Effectively Cleans Coal, Green Delayed Petcoke, Calcined Petcoke & Sulphur - Alkaline based cleaner with good high foaming nature for use in hold cleaning and general degreasing. its heavy molecular surfactants rapidly reacts with water and produce effective cleaning solution.

Product Technical Specification:

SPECIFICATIONS of PRODUCTS
•   Appearance   : Pale Clear Liquid
•   Specific gravity       : 1.065
•   Flash Point              : None
•   pH-value at 200C   : >12

CLEANING AND MAINTENANCE CHEMICALS ALKAATUFF ALKALINE HIGH FOAM under HS Code 34029011 this products are kept under degreasing preparations, synthetic detergent, detergent powder, surface active, cleaning treatment.

RXSOL brand is largest supplier of ALKAATUFF ALKALINE high foam Nhava Sheva Sea, Mundra and Kandla, Chennai, Visakhapatnam. Ennore, Dhamra, Kolkata, Ennore, Paradip.

Average price of ALKAATUFF high foam per unit is USD 1 and we are providing ready stock of ALKAATUFF ALKALINE in all coastal of INDIA and Middle East.

Remarks:

For degreasing and removal of residues of mimerals oil , coal stain and soot from surface.

Safety Phrases
S-2 Keep out of the reach of children.
S-26 In case of contact with eyes, rinse immediately with plenty of water and seek medical advice.
S-36/37/39 Wear suitable protective clothing, gloves and eye/face protection.
S-45 In case of accident or if you feel unwell, seek medical advice immediately (show the label where possible).

Not suitable for use with soft metal like aluminium, magnesium and zinc silicate coatings.

All chemical products should be handled with care. Protective clothing and respiratory equipment should be used where necessary.

Other Valuable Products for Marine - SHIP industries-

SCALE CLEANING LIQUID

SCALE REMOVING POWDER

DISC FILTER LEAN

ELECTRICAL PARTS CLEANER

NATURAL HAND CLEANER

Invirocleaner

OIL Spill Dispersant Clean O.S.D

COLD Degreaser WASH HD

Sea voyage cleaner

CLEAN SOLUTION BREAK

General Cleaner

Images:

LiveChat

Search form

Hold Clean XF

IRON ORE RUST REMOVER

CARGO Clean Heavy Duty

PRELOAD Slip HOLD BLOCK

Alkaleen Extra Heavy Duty

Air Operated Double Diaphragm Pump

Chemical Discharge Hose 50 Meter

Sodium Hypo Chlorite 12 to 15

ALKAATuff High Foam CLEANER

Removal of cargo residue:

Loose Rust & Paint Scale:

Cleanliness of cargo hold bilges :

ALKAATUFF ALKALINE

RX SOL

LATEST POSTS

Buffer Cleaner

Caustic Soda

Find Us

LiveChat