Buffer Cleaner
Oman Chemical is leading one Largest Supplier, Manufacture a
Your shopping cart is empty.
Product Code: RXSOL-33-1102-100
Citric Acid is a water treatment chemical used as pH control and for the removal of iron and other elements from fouled water softeners. Removes hard water built up, scale and lime. Citric Acid 50% Solution is used as a preservative, acidifier, chelator, and flavoring in various sections of the food and beverage industry.
PRODUCT SAFETY INFORMATION Keep containers tightly closed when not in use. Avoid contact with skin, eyes, and clothing. Avoid breathing vapors or mists. Remove contaminated clothing and wash thoroughly after handling. Hand protection: Use of gloves impermeable to the specific material handled, if necessary Eye protection: Chemical goggles or safety glasses. Face shield, if necessary Respiratory protection: Wear a NIOSH approved or equivalent dust respirator, if necessary DOT CODE GHS CODE Acute Toxicity, Dermal Category 5 Skin Irritation Category 3 Eye Irritation Category 2A HMIS CODE N/A
PHYSICAL PROPERTIES INFORMATION Physical state: Liquid Color: Clear colorless liquid Odor: Odorless pH: 2.2 (0.1 N sol) Specific Gravity: 1.24 – 1.26 STORAGE INFORMATION Keep container(s) tightly closed. Store this material in cool, dry, well ventilated areas. Protect container(s) against physical damage. Containers of this material may be hazardous when empty since they retain product residues (vapors, liquid). Shelf life: Stored under controlled conditions 1 year.
DELIVERY Containers: 55 Gal Plastic drums / 250 Gal Tote bin / Bulk tank trucks. NOTE Refer to the SDS for further health, safety and environmental information regarding this product. Information and recommendations in this technical data sheet are based on information believed to be reliable. However, the use of the product is beyond our control, and no guarantee expressed or implied is made as to the effects of such the results to be obtained id not used in accordance with directions or established safe practice. The buyer must assume all responsibility including injury or damage, resulting from misuse of the product as such, or combination with other materials. Issue date: March 1, 2016
Product Code: RXSOL-22-2205-060
|
PRODUCT SPECIFICATION SHEET |
||
|---|---|---|
|
Muriatic Acid |
||
|
Parameters |
Specification Range |
Typical |
|
% Strength |
34.5 – 35.5 |
35.0 |
|
Specific gravity @ 60°F |
1.175 – 1.182 |
1.18 |
|
Degree Baumē (Bē) |
21.8 – 22.2 |
22.0 |
|
Iron (ppm) |
0.5 – 1.5 |
< 0.5 |
|
Color (APHA) |
N/A - 20 |
< 20 |
|
Total organic compound (ppm) |
N/A – 5 |
< 5 |
|
Lead (Pb) (ppm) |
N/A - 1 |
<1 |
|
Oxidizing substance (as cl2 ppm) |
N/A – 30 |
< 30 |
|
Reducing Substances (as SO3) |
N/A - 70 |
<70 |
|
Non-Volatile Residue (wt.%) |
N/A - 0.5 |
<0.5 |
|
Sulfate (SO4) (%) |
N/A - 0.5 |
<0.5 |
Before you remove stains and uses of Muriatic make sure to thoroughly protect yourself. personnel involved must wear full “Personal Protective Equipment”. using a designated cleaning kit.
Product Code: RXSOL-20-2006-020
Product Code: RXSOL-19-1101-060
|
|
|
|
Properties |
|
|
Molecular formula |
HCl in water (H2O) |
|
Molar mass |
36.46 g/mol (HCl) |
|
Appearance |
Clear colorless to light-yellow liquid |
|
Melting point |
−26°C (247 K) 38% solution |
|
Boiling point |
110 °C (383 K), 20.2% solution; |
|
Solubility in water |
Miscible |
|
Acidity (pKa) |
−8.0 |
|
Viscosity |
1.9 mPa s at 25° C, |
|
Flash point |
Non-flammable |
Safety
Hydrochloric acid in high concentrations forms acidic mists. Both the mist and the solution have a corrosive effect on human tissue, with the potential to damage respiratory organs, eyes, skin, and intestines. Upon mixing Muriatic acid with common oxidizing chemicals, such as bleach (NaClO) or permanganate (KMnO4), the toxic gas chlorine is produced. To minimize the risks while working with hydrochloric acid, appropriate precautions should be taken, including wearing rubber or PVC gloves, protective eye goggles, and chemical-resistant clothing.
Product Code: RXSOL-19-1106-060
Nitric Acid (68%) Safety Data Sheet
|
Chemical Identity
|
|
|
|||||||||||||||||||
|
|
|||||||||||||||||||||
|
Physical / Chemical Data
|
|
||||||||||||||||||||
|
|
|||||||||||||||||||||
|
Fire / Explosion Hazard Data
|
|
||||||||||||||||||||
|
Health Hazards / First Aid Measures
|
|
||||||||||||||||||||
|
|
|
||||||||||||||||||||
|
Preventive Measures
Spills |
|
Hazard: Dangerous fire risk in contact with organic materials. Highly toxic by inhalation, corrosive to the skin and mucous membranes. Uses :Organic synthesis (dyes, drugs, explosives, cellulose nitrate, nitrate salts ), photoengraving, etching steel.
Product Code: RXSOL-64-2623-001
Various colour with standard size.
Product Code: RXSOL-15-T300-025
Product Code: RXSOL-22-2209-025
OCCURS OR SYMPTOMS PERSIST.
| INTENDED USE |
DILUTION RATE (Concentrate : Fresh Water) |
BOXES PER HOLD |
HANDYMAX (per week) |
PANAMAX (per week) |
| Bilge Water (Acidic Water) Neutralizer | 1 : 23 (4 ltrs : 92 ltrs water) | 20-25 Ltrs | 100 Ltrs | 125 Ltrs |
FIRST AID MEASURES
SKIN : Wash exposed areas with water.
EYES : Flush eyes with plenty of water for 20 mins.
INHALATION : Remove patient to fresh air.
INGESTION : Do not induce vomiting.
Give patient a glass of water or milk.
GET MEDICAL ATTENTION IF ALLERGIC REACTION
We are marine chemical supplier since 1996.These Marine Chemicals include different sets of products such as Tank Cleaners, Maintenance Chemicals, Cooling Water Treatment Chemicals, Boiler Water Treatment Chemicals, Fuel Additives, etc.
Oman Chemical is leading one Largest Supplier, Manufacture a
Oman Chemical is leading one Largest Supplier, Manufacture a
