Buffer Cleaner
Oman Chemical is leading one Largest Supplier, Manufacture a
Your shopping cart is empty.
Muriatic acid in high concentrations forms acidic mists. Both the mist and the solution have a corrosive effect on human tissue, with the potential to damage respiratory organs, eyes, skin, and intestines. Upon mixing Muriatic acid with common oxidizing chemicals, such as bleach (NaClO) or permanganate (KMnO4), the toxic gas chlorine is produced. To minimize the risks while working with Muriatic acid, appropriate precautions should be taken, including wearing rubber or PVC gloves, protective eye goggles, and chemical-resistant clothing.
INGREDIENTS:
Salt
| PHYSICAL SPECIFICATION: | |
| Colour | Crystal is transparent to white opaque solid |
| Texture | Medium crystal |
| Size |
This product is sieved using the following mesh size screens: Lower: 1.66mm Upper: 3.86mm Manual sieve: maximum of 1% >4.16mm and a maximum of 5% <1.55mm. |
| Purity | 99.5% minimum |
| Moisture | 0.2% maximum |
| Insoluble Matter |
0.3% maximum |
Physical Information
| Physical | Min | Target | Max |
| Sodium Chloride (%) | 99.6% | ||
| Ca & Mg as Ca (%) | 0.08 | ||
| Sulfate as SO4 (%) | 0.13 | ||
| Water Insolubles (%) | 0.02 | ||
| Bulk Density (cu/ft) | 66 | 70 | 74 |
| Bulk Density (g/l) | 1060 | 1120 | 1185 |
| Surface Moisture (%) | 0.05 |
12.5% wt. SODIUM HYPOCHLORITE - EXTRA - PURE
| Parameters | Specification Range | Typical |
|
Sodium Hypochlorite as NaOCl (%wt) |
12.5 - 13.2 | 13.0 |
| Available Chlorine (%wt) | 11.9 - 12.6 | 12.4 |
| Available Chlorine (%vol) | 14.3 - 15.3 | 15.0 |
| Available Chlorine grams/liter | 143 - 153 | 150 |
| Excess Caustic (%wt) | 0.25 - 0.80 | 0.30 |
| Specific Gravity @ 60°F | 1.197 - 1.220 | 1.210 |
| pH | 12.0 - 13.0 | 12.50 |
| Iron (Fe) ppm | <0.5 | 0.05 |
| Nickel (Ni) ppm | <0.2 | 0.02 |
| Copper (Cu) ppm | <0.2 | 0.05 |
| Mercury (Hg) ppb | 0.001 - 0.003 | 0.002 |
| Sodium Chloride (NaCl)% | <15.0 | 12.5 |
Appearance: Clear greenish-yellow liquid miscible in any proportion with water.
This product meets the requirements of NSF standard 60 for drinking water.
Appearance: White powder
Odour: Perfumed
pH = 12 – 13 (1% solution)
Vapour Pressure: N/K
Vapour Density: N/K
Boiling Point : N/A
Freezing Point: < 0°C
Solubility in water: Soluble
Specific Gravity : N/K
Evaporation rate: Not applicable
% Volatile by vol: < 15%
We are marine chemical supplier since 1996.These Marine Chemicals include different sets of products such as Tank Cleaners, Maintenance Chemicals, Cooling Water Treatment Chemicals, Boiler Water Treatment Chemicals, Fuel Additives, etc.
Oman Chemical is leading one Largest Supplier, Manufacture a
Oman Chemical is leading one Largest Supplier, Manufacture a
