Buffer Cleaner
Oman Chemical is leading one Largest Supplier, Manufacture a
Your shopping cart is empty.
Product Code: RXSOL-18-1049-025
Product Code: RXSOL-18-1049-005
Product Code: RXSOL-18-1018-025
Product Code: Rxsol-18-1017-020
|
Appearance: |
A thin black liquid, with a strong solvent odor |
|
Solids Content: |
Above 35% |
|
Dangerous Goods Class: |
3 |
|
Poisons Schedule Number: |
5 |
Product Code: RXSOL-15-1054-010
Product Code: RXSOL-16-1558-210
| Property | Unit | Method | Value |
| Density @15°C | kg/l | ASTM D4052 | 0.785 |
| Cubic Expansion Coefficient @20°C | (10^-4)/°C | Calculated | 9 |
| Refractive Index @20°C | - | ASTM D1218 | 1.437 |
| Color | Saybolt | ASTM D156 | + 30 |
| Bromine Index | mg Br/100g | ASTM D2710 | 200 |
| Copper Corrosion (3hr @100°C) | ASTM D 130 | 1 | |
| Doctor Test | D 235 | Negative | |
| Non Volatile Matter | mg/100ml | ASTM D1353 | 1 |
| Distillation, IBP | °C | ASTM D86 | 182 |
| Distillation, EP | °C | ASTM D86 | 206 |
| Relative Evaporation Rate (nBuAc=1) | ASTM D3539 | 0.05 | |
| Relative Evaporation Rate (Ether=1) | DIN 53170 | 200 | |
| Antoine Constant A # | kPa, °C | 6.14569 | |
| Antoine Constant B # | kPa, °C | 1636.33 | |
| Antoine Constant C # | kPa, °C | 200.436 | |
| Antoine Constants: Temperature range | °C | +50 to +175 | |
| Vapor Pressure @20°C | kPa | Calculated | 0.05 |
| Saturated Vapor Concentration @20°C | g/m³ | Calculated | 3 |
| Paraffins | % m/m | GC | 47 |
| Naphthenes | % m/m | GC | 40 |
| Aromatics | %v/v | ASTM D1319 | 12 |
| Benzene | mg/kg | GC | < 3 |
| Sulfur | mg/kg | SMS 1897 | < 0.5 |
| Flash Point | °C | ASTM D93 | 64 |
| Auto Ignition Temperature | °C | ASTM E659 | 281 |
| Explosion Limit: Lower | %v/v | - | 0.7 |
| Electrical Conductivity @20°C | pS/m | - | < 1 |
| Pour Point | °C | ASTM D97 | <-30 |
| Surface Tension @20°C | mN/m | Du Nouy ring | 26 |
| Viscosity @25°C | mm²/s | ASTM D445 | 1.5 |
| Hildebrand Solubility Parameter | (cal/cm³)^½ | 7.7 | |
| Hydrogen Bonding Index | 0.5 | ||
| Fractional Polarity | 0 | ||
| Heat of Vaporization @Tboil | kJ/kg | 270 | |
| Heat of Combustion (Net) @25°C | kJ/kg | 44500 | |
| Specific Heat @20°C | kJ/kg/°C | 2.0 | |
| Thermal Conductivity @20°C | W/m/°C | 0.14 | |
| Molecular Weight | g/mol | Calculated | 158 |
For quality control analyses, local test methods may be applied that are different from those mentioned in this datasheet. Such methods have been validated and can be obtained through other. Rxsol H does not contain detectable quantities of polycyclic aromatics, heavy metals or chlorinated compounds.
Storage : Store Cool and Dry Palce. Keep Far away from direct flame.
Product Code: RXSOL-18-1013-010
RXSOL MPC 1013 is particularly used in aircraft industry because of its non-reactivity with aluminium, copper, brass their alloys.
The condition of metal surface is a vital factor affecting paint adhesion—the greater the surface, the better the adhesion of the coating. The increased area resulting from sandblasting, etched surface, porous castings and from conversion coatings have added to the difficulty of paint removal. Not only do these conversion coatings increase the surface area of the metal, but the porous nature of the inorganic film enables the paint to penetrate into the crevices and form a deep-rooted and firmly bound bond with the surface. The increased surface and the penetration of the paint into the porous inorganic film retards the stripping operation. Using the same paint and the same stripper, the coating on an untreated surface will wrinkle and lift away rapidly in large sheets. On the other hand, the stripping time of the piece having a conversion coating is greatly increased,- and the appearance of the stripped paint coat is considerably altered. Instead of the customary large sheets of paint and a clean surface, the coatings from phosphated, chromatized or anodized work, break away in small uneven pieces, leaving much of the paint coat still clinging to the metal.
Heavily pigmented coatings affect the efficiency of the stripper. The high pigment content plus the density of the pigment retard the solvent stripper from penetrating through the coating to the base metal to break the bond between the metal and the coating. Such coatings are usually found on refrigerators, washing machines, etc., where high chemical and moisture resistance are desirable. The stripping time for these coatings is considerably greater than a coating coning the same resin with a lower pigment content.
Product Code: RXSOL-19-1450-210
|
||||||||||||||||||
| PRODUCT NAME | : | TOLUENEDIISOCYANATE |
| CAS number | : | 584-84-9 |
| UN number | : | 2078 |
| Formula | : | CH3C6H3(NCO)2 |
| Odour | : | PUNGENT |
| Solubility in water | : | REACTION |
| Density | : | 1.22 at 20 oC |
| Boiling point | : | 251oC |
| Melting point | : | 20 oC |
| Viscosity | : | |
| Flashpoint | : | 132 oC |
| Explosive limits | : | 0.9 -9.5 Vol% |
| Vapour pressure | : | .01 mbar at 20 oC |
| Skin absorption/irritation | : | YES |
| TLV Country NL Year 1995 | : | 0.005 ppm 0.04 mg/m3 |
| Pollution category 1994 | : | C |
Product Code: RXSOL-18-1013-025
Contact with skin can cause serous chemicals burns. Avoid contact with skin & eyes.Wear PVC gloves while handling. Do not take internally. Spl-ashes of the product or its solutions on the skin or clothing should washed immediately with cupious amount of water . If the eyes are affected should be washed with water for at least 15 minutes and seek medicals attention sought immediately.
Product Code: RXSOL-16-1035-025
Wide range of grades available, including custom orders
Gentle – clean surfaces without damaging underlying material
Porous – can be used to absorb contaminants
Organic: renewable and environmentally friendly
100% silica-free
Re-usable
Specification :
Physical Characteristics
| Appearance: | Brown color, solid natural granules |
| Size: | 1 - 1.5 mm. (new tolerance) Also refer above " Description " section |
| Corrosive action | None |
| Safety Risk / Advise |
None |
| Specific Gravity: | 1.2 – 1.4 |
| Hardness: | 3 on MOHS scale |
| Moisture: | NMT 11% by weight |
| PH: | 7.5 |
| GSA Specification: | AA‐1722 Type 2 |
| Chemical Analysis ‐ % by weight |
Nitrogen: .10 Specific Cellulose: 40/60 Lignin: 20/30 Toluene: .5/1.0 Solubility: 6.5 |
| Military Specification: | MIL‐G=5634, Type 3 |
| Methoxyl: | 1.0 |
| Chlorine: | 1.5 |
| Ash: | 1.0 |
Offer Walnut Shell pieces/walnut shell powder for chemical industrial.
Processing walnut shell pieces, walnut shell powder with any size. We process a large quantity per month and packing as per inquiry.
Product: Walnut shell pieces
Origin: INDIA
Grade:
-walnut shell pieces
-small shell pieces
-walnut shell powder
Packing: 1MT/flexi bag or bulk or as customer’s request in 25 Kg
Supply Location : Fujairah, Mumbai, Kandla, Kolkata, Visakhapatnam, Dubai, Sharjah, Abudhabi
For Export Min quantity: 1x40feet (20MT)
For Local Supply : 25 Kg BAG
We are marine chemical supplier since 1996.These Marine Chemicals include different sets of products such as Tank Cleaners, Maintenance Chemicals, Cooling Water Treatment Chemicals, Boiler Water Treatment Chemicals, Fuel Additives, etc.
Oman Chemical is leading one Largest Supplier, Manufacture a
Oman Chemical is leading one Largest Supplier, Manufacture a
