Ethyl Titanate

Size:

Color:

Product Short Description: Ethyl titanate, also known as titanium ethoxide, is a chemical compound with the formula Ti(OC2H5)4, a colorless liquid soluble in organic solvents
Product Technical Specification:

TECHNICAL SPECIFICATION::

  • Chemical Formula: Ti(OEt)4 or Ti(C2H5O)4
  • Molecular Weight: 228.111 g/mol
  • CAS Number: 3087-36-3
  • Appearance: Colorless liquid
  • Solubility: Miscible in most organic solvents, decomposes quickly in water
  • Density: 1.088 g/mL at 25 °C
  • Boiling Point: 150-152 °C (at 10 mmHg)
  • Refractive Index: 1.505 (n 20/D)
  • Flash Point: 40 °C
  • Viscosity: 70 mPa*s (at 20 °C)
  • Stability: Incompatible with strong oxidizing agents and strong acids. May decompose upon exposure to air or moisture 
Remarks:

PRECAUTION::

General Precautions:

  • Flammability: Ethyl titanate is a flammable liquid and vapor, so keep it away from heat, sparks, open flames, and other ignition sources. 
  • Storage: Store in a cool, well-ventilated place, away from incompatible materials. 
  • Container: Keep containers tightly closed to prevent evaporation and potential ignition. 
  • Ventilation: Ensure adequate ventilation, especially in confined areas, to prevent the buildup of flammable vapors. 
  • Static Discharge: Take precautionary measures against static discharge, as this can cause ignition. 
  • Tools: Use only non-sparking tools when handling ethyl titanate. 
  • Eye and Skin Contact: Avoid contact with skin and eyes. 
  • Inhalation: Avoid inhaling vapors or mist. 

Personal Protective Equipment (PPE):

  • Gloves: Wear appropriate protective gloves to prevent skin contact.
  • Eye Protection: Wear protective eyeglasses or chemical safety goggles.
  • Face Protection: Use face protection if there is a risk of splashing or spraying.
  • Respirator: Use a NIOSH/MSHA or European Standard EN 149 approved respirator if exposure limits are exceeded or if irritation or other symptoms are experienced. 
Images: Alt

Benzoic Acid

Size:

Color:

Product Short Description: Benzoic Acid used in the manufacture of alkyd resins and drilling mud additive for crude oil recovery applications. It is also used as a rubber polymerization activator, retardant, resins, alkyd paint, plasticizers, dyestuffs, and fibers.
Product Technical Specification:
Remarks:

Uses of Benzoic Acid

Some important uses of C6H5COOH are listed below.

  • The production of phenol involves the use of benzoic acid.
  • This compound is used in ointments that prevent or treat fungal skin diseases.
  • C6H5COOH is used as a preservative in the food industry.
  • Benzoic acid is an ingredient in many cosmetic products, such as lipsticks.
  • It is also a precursor to benzoyl chloride, which finds its application in making other chemicals, dyes, perfumes, herbicides and medicines.
  • One of the components of toothpaste, mouthwash, and face wash creams is C6H5
  • This compound is also used in the manufacture of dyes and in insect repellants.
Images: Alt

EPICHLOROHYDRIN

Size:

Color:

Product Short Description: PURE EPICHLORHYDRIN used extensively as an industrial intermediate, a laboratory reagent, and as an insecticide.
Product Technical Specification:
 Physical Properties:
 
Melting point -57 °C
Boiling point 115-117 °C(lit.)
Density 1.183 g/mL at 25 °C(lit.)
Vapour density  3.2 (vs air)
Vapour pressure  13.8 mm Hg ( 21.1 °C)
Refractive index  n20/D 1.438(lit.)
Flash point  93 °F
Storage temprature  Store below +30°C.
Solublity  65.9g/l
Form Liquid
Specific gravity 1.183 (20/4℃)
Explosive limit  3.8-21%(V)
Water solublity  6 g/100 mL (10 ºC)
Dielectric constant 22.9(20℃)
Stability Unstable. Flammable - note wide explosion limits and low flash point.
Remarks:
Images: Alt

2-Methylimidazole

Size:

Color:

Product Short Description: 2 Methylimidazole is an organic compound white or colorless solid that is highly soluble in polar organic solvents and water.
Product Technical Specification:

Physical Properties:

Melting Point  142-143 °C lit.
Boiling Point  267-268 °C lit.
Density 1.0500  rough estimate
Vapour pressure  <1 mm Hg ( 0 °C
Refractive index 1.4970  estimate
Flash Point 155 °C
Solublity 780g/l
Storage temprature  2-8°C
pKa 14.44±0.10 Predicted
Form Crystalline Powder
Colour White to light yellow
PH 10.5-11.5
Solublity Soluble in water and ethanol
Remarks:
    Uses:
  • 2-Methylimidazole is used as a raw material for the preparation of nitroimidazole antibiotics, which is useful in combat anaerobic bacterial and parasitic infections. It acts as a ligand in coordination chemistry.
  • It is also employed as a hardener or accelerator for epoxy resin and auxiliary agent for textile dyes. Further, it acts as a catalyst for refolding of enhanced colored fluorescent protein.
  • It is also useful as a building block in the synthesis of biologically active compounds. In addition to this, it is used as an active pharmaceutical ingredient intermediate such as metronidazole and dimetridazole. 
  • 2-Methylimidazole is a monomethylated imidazole that can be used as a building block in the preparation of a wide range of biologically active compounds.
  • 2-Methylimidazole as well as other imidazoles can be use as catalyst for refolding of enhanced coloured fluorescent protein.
  • 2-Methylimidazole has been identified as a byproduct of fermentation and is detected in foods and mainstream and side-str eam tobacco smoke.
Images: Alt

Dimethyl Sulfoxide

Size:

Color:

Product Short Description: This colorless liquid is an important polar aprotic solvent that dissolves both polar and nonpolar compounds and is miscible in a wide range of organic solvents as well as water.
Product Technical Specification:

Boiling point: 189 °C
Density: 1.10 g/cm³
Formula: C2H6OS
Melting point: 19 °C
Molar mass: 78.13 g/mol

Remarks:
Images: Alt

Paint Remover Water Based

Size:

Color:

Product Short Description: Paint remover water based chemical free from solvent which has strong paint dissolving properties
Product Technical Specification:

Chemical Name

Percent

Value

Test Method

Sodium hydroxide(NaOH),min.

percent

48-55

STAS3068

Sodium carbonate (Na2CO3), max

percent

0.7

STAS3068

Proprietory Blend of paint remover chemicals

percent

45-52 

-

Remarks:
Images: Alt

SYNTHETIC THINNER

Size:

Color:

Product Short Description: Synthetic Thinner is used for thinning synthetic enamels and, thanks to its slow evaporation rate, ensures shine and good spreadability of the coating.
Product Technical Specification:
Remarks:
Images: Alt

Anti Rusting Liquid Solution

Size:

Color:

Product Short Description: Anti Rust Liquis Solution is used on ferrous surfaces as a rust inhibiting treatment to protect parts during in-plant storage or handling. Steel components continually immersed in aqueous solutions of Anti Rust Liquis Solution will not rust. Anti Rust Liquis Solution is valuable as a rust inhibiti
Product Technical Specification:

 

Appearance Clear liquid
Specific Gravity 0.95-1.10
Odour Pleasent
pH@5% 9.50-10.50
Volatile by % <0.12 - 0.15
Flash Point 220 °C
Solubility in Water 100% Soluble

 

Remarks:

 ANTI RUSTING LIQUID SOLUTION allows flexibility to customize the length of protection required and the applied cost per square foot (or m2). ANTI RUSTING LIQUID SOLUTION  forms a solution in water and is applied to metal surfaces by spraying or dipping. It is easly soluble in water and provide resistance against bactria and proterct fungus also.

Images: Alt

Mordant Pre Treatment Etching Wash

Size:

Color:

Product Short Description: Changes colour to black to indicate effectiveness
Product Technical Specification:
PRODUCT NAME : Mordant Pre Treatment Etching Wash
Odour : Characteristic Odour
Solubility in water : COMPLETE , ( 5.48 g/mL )
Density : > 1 g/cm3
Flashpoint : 31 deg C
Skin absorption/irritation : YES
Remarks:
Images: Alt

Acetone cyanohydrin

Size:

Color:

Product Short Description: 2-hydroxy-2-methylpropanenitrile is a cyanohydrin. Acetone cyanohydrin (ACH) is an organic compound used in the production of acrylic
Product Technical Specification:

 

PRODUCT NAME : ACETONECYANOHYDRIN
CAS number : 75-86-5
UN number : 1541
Formula : (CH3)2COHON
Odour :  
Solubility in water : COMPLETE
Density : 0.932 at 19 oC
Boiling point : 95 oC
Melting point : 20  oC
Viscosity :  
Flashpoint : 74 oC
Explosive limits : 2 – 11 Vol %
Vapour pressure : 1.1 mbar at 20 oC
Skin absorption/irriation : YES
TLV      Country :  
Pollution category      1994 :  A

 

Remarks:
Images: Alt
stock-clearance.png