Buffer Cleaner
Oman Chemical is leading one Largest Supplier, Manufacture a
|
COOH.2H2O |
OXALIC ACID |
| Molecular Formula | Mol Wt. 126 |
| APPEARANCE |
Fine colourless & Odourless prismatic crystals. (It has appearance of powder form.) |
| CHEMICAL COMPOSITION | |
| OXALIC ACID CONTENT % BY MASS | MIN 99.00% |
| SULPHETED ASH % BY MASS | MAX 0.15% |
| CHLORIDE (as CI) % BY MASS | MAX. 0.005% |
| SULPHETES (as SO4) % BY MASS | MAX 0.10% |
| IRON (as Fe) % BY MASS | MAX 0.05% |
| HEAVY DUTY METALS (as Pb) |
MAX 0.005% |
| SOLUBILITY | Soluble in water, water solution is clear & colourless. |
Handling Procedure ::: ---
Donot contact with skin and eyes. May cause burns or irritation. Harmful if swallowed. Can be Neutralised by use Ammonia or Borax, or wash with water.
DO NOT allow solution to get into gloves or soak through clothing to skin.

Rust convertor RXSOL-28-1011-005 is polymeric reaction based material, After reaction with rusted particle gives inert atmosphere by leaving polymeric pricipitate on metal surface.
| Appearance | Clear Colourless Liquid | |
| Density | g/cm3 at 20°C 1.05 | |
| Solubility | Water soluble | |
| Drying Time | 1-2 HOURS | |
| Coverage | 18-25 Sq. M/ Lts | |
| Packaging | Order No.: RXSOL-28-1011-005 |
Size (in Ltrs) 25 Ltrs |
Personal- Protection:
| Occupational Exposure Limits | This product does not contain any ingredients,which has an established exposure limit. |
| Respiratory Protection | Not normally needed |
| Hand Protection | PVC Acid proof gloves. |
| Eye Protection | Chemicals splash goggles. |
| General Remarks | |
| Materials to Avoids | Acids, Alkalis, Organic materials, Reducing agents & Strong Oxidizing agents |
**Read the Material Safety Data Sheet before using this product**

PRODUCT PROPERTIES :
| APPEARANCE | Clear liquid | |
| DENSITY | g/cm3 at 15°C: 1.2 | |
| pH | 10% solution 1.5-2.5 | |
| COMPATIBILITY | ||
| METAL | Concentrate and long touch may corrode. | |
| RUBBER | No known effect | |
| PACKAGING | Order No. RXSOL-13-1096-050 | Size (in litres) 25 , 35 , 210 |
Rust Brite RUST stain remover manufacturer, supplier and Exporter. We are keeping ready stock of materials in various packing. And we are also one of largest supplier of Rust Brite Rust Stain Remover in Chennai, Mumbai, Kolkata, Vizag, Kandla - Gandhidham, Surat - Hazira.


Physical Properties:
| Melting Point | 17-19 °C (lit.) |
| Boiling Point | 167 °C/10 mmHg (lit.) |
| Density | 1.475-1.485 g/mL at 20 °C 1.481 g/mL at 25 °C (lit.) |
| Vapour density | 3.3 (vs air) |
| Vapour Pressure | 1 mm Hg ( 20 °C) |
| Refractive index |
n |
| Flash Point | >230 °F |
| Storage temprature | 2-8°C |
| Solublity | Water soluble1,000 g/L at 20°C |
| pKa | -2.6(at 25℃) |
| form | Solution |
| Colour | Brown |
| Specific gravity | 1.48 (18/4℃) |
| Water solublity | Miscible with water. Slightly miscible with benzene and toluene. Immiscible with paraffins. |

SPECIFICATION FOR SILICA GEL INDICATING (BLUE) / NON INDICATING (WHITE):
| Loss on drying : | Not more that 5% mass |
| Absorption Capacity : | 27% min on the basis of mass |
| PH : | 3.5 to 8. |
| Chlorides : | 0.05% by mass max |
| Cobalt (as CoCl2) : | 0.4 by mass max |
| Ammonium compounds (as NaH3): | 0.5% by mass max |
| Sulphates (Na2SO4) : | 0.5% by mass max |
| Packing: |
25 / 50 kgs M S drum (Smaller packing available). |

Rust convertor RXSOL-28-1050-025 is polymeric reaction based material, After reaction with rusted particle gives inert atmosphere by leaving polymeric pricipitate on metal surface.
| Appearance | Clear Colourless Liquid | |
| Density | g/cm3 at 20°C 1.05 | |
| Solubility | Water soluble | |
| Drying Time | 1-2 HOURS | |
| Coverage | 18-25 Sq. M/ Lts | |
| Packaging | Order No.: RXSOL-28-1050-025 |
Size (in Ltrs) 25 Ltrs |
Personal- Protection:
| Occupational Exposure Limits | This product does not contain any ingredients,which has an established exposure limit. |
| Respiratory Protection | Not normally needed |
| Hand Protection | PVC Acid proof gloves. |
| Eye Protection | Chemicals splash goggles. |
| General Remarks | |
| Materials to Avoids | Acids, Alkalis, Organic materials, Reducing agents & Strong Oxidizing agents |
**Read the Material Safety Data Sheet before using this product**



