Mark Ship Chandler:


BAUXITE Remover

Size:

Color:

Product Short Description: Specifically designed to clean hard cases of bauxite cargo deposits or bauxite stains from CARGO HOLD.
Product Technical Specification:
Remarks:

This is a well balanced blend of corrosion inhibitors , and surface active highly emulsified acidic materials product for the cleaning of aluminium, copper and removal of rust stains on paint work.

Do not eat, drink or smoke while handling it; wash carefully with soap and water before meals and after work shift as shower is recommended.

R 34    : Causes burns.
S 26    : On contact with eyes,Wash eye ball immediately with plenty of water and seek medical advice.

Images: Alt


Cargo Hold Block

Size:

Color:

Product Short Description: Cargo Hold Block is useful to protect from aggressive or corrosive dry bulk cargoes such as fertilizers, salt, coal, or sulphur.
Product Technical Specification:
  • Product metal against corrosive cargo
  • Products paint against cargo penetration
  • Environmentally friendly
  • Safe to  use in occupied / covered areas
  • Reduces turn around times
  • Easy to direct spray
  • If hold cleaning is to be performed from tank top level only powerful equipment designed for cargo hold cleaning will do the job in a minimum of time.
  • Effective cleaning chemicals that can dissolve stains and remove discoloring are required the crew needs to have effective  equipment to apply these chemicals from tank top level personal proactive equipment is required depending on type and condition of hold paint chemical that protect the paint may also be needed
  • And don’t forget procedures  have to be drown up and your
  • Crew  trained for the job Standardization of equipment and chemical onboard you ship will make life easier for your seaman and save your time
Remarks:

Refer this link for complete set of HOLD CLEANING KIT  ::: http://rxmarine.com/Ship-hold-cleaning-kit-set-supplier

SLIPcoat supplier in Sohar Muscat Oman, Fujairah Dubai UAE

Images: Alt


IRON ORE RUST REMOVER

Size:

Color:

Product Short Description: Excellent pre treatment and binder for metal surfaces to be painted. Concentrated blend of RXSOL proprietory formulated various products, which is specifically designed for the rapid removal of rust, while providing phosphatized ferrous metal surface.
Product Technical Specification:
Remarks:
Images: Alt
Get MSDS
Get Technical Bulletin
Connect On Whats App


BAUXITE Remover

Size:

Color:

Product Short Description: Specifically designed to clean hard cases of bauxite cargo deposits or bauxite stains from CARGO HOLD.
Product Technical Specification:
Remarks:

This is a well balanced blend of corrosion inhibitors , and surface active highly emulsified acidic materials product for the cleaning of aluminium, copper and removal of rust stains on paint work.

Do not eat, drink or smoke while handling it; wash carefully with soap and water before meals and after work shift as shower is recommended.

R 34    : Causes burns.
S 26    : On contact with eyes,Wash eye ball immediately with plenty of water and seek medical advice.

Images: Alt
Get MSDS
Get Technical Bulletin
Connect On Whats App


Cement Remover RX Hold

Size:

Color:

Product Short Description: Highly concentrated and powerful penetrating agents materials which is effectively react with cement to loosen the bonding strength . Best results can obtain on dry surface of cement. RXSOL'S R & D has developed this molecular cement dissolver as an alt
Product Technical Specification:
Remarks:
Images: Alt
Get MSDS
Get Technical Bulletin
Connect On Whats App


Sodium Hypo Chlorite 12-15 Percent

Size:

Color:

Product Short Description: High-test hypochlorite (HTH) is sold for chlorination of WATER
Product Technical Specification:

12.5% wt. SODIUM HYPOCHLORITE - EXTRA - PURE

Parameters Specification Range Typical

Sodium Hypochloriteas NaOCl (%wt)

 12.5 - 13.2 13.0
Available Chlorine (%wt) 11.9 - 12.6 12.4
Available Chlorine (%vol) 14.3 - 15.3 15.0
Available Chlorine grams/liter 143 - 153 150
Excess Caustic (%wt) 0.25 - 0.80 0.30
Specific Gravity @ 60°F 1.197 - 1.220 1.210
pH 12.0 - 13.0 12.50
Iron (Fe) ppm <0.5 0.05
Nickel (Ni) ppm <0.2 0.02
Copper (Cu) ppm <0.2 0.05
Mercury (Hg) ppb 0.001 - 0.003 0.002
Sodium Chloride (NaCl)% <15.0 12.5

Appearance: Clear greenish-yellow liquid miscible in any proportion with water.
This product meets the requirements of NSF standard 60 for drinking water.

Remarks:

Sodium Hypo Chlorite

Electrolysis Process ( Pure & Concentrated )
This is an improved version of this method, known as the Hooker process, In the process, sodium hypochlorite (NaClO) formed when chlorine is passed into cold and dilute sodium salt solution. It is prepared with minimal separation between the anode and the cathode .The solution must be kept below 40 °C (by cooling coils) to prevent the undesired formation of sodium chlorate and to keep chlorine concentration up to 15%.

Chloro Alkali process ( Chlorine value is less )

E. S. Smith patented a method of sodium hypochlorite production involving electrolysis of brine to produce sodium hydroxide and chlorine gas, which then mixed to form sodium hypochlorite. This is known as the chloralkali process. Both electric power and brine solution were in cheap supply at the time, and various enterprising marketers took advantage of the situation to satisfy the market's demand for sodium hypochlorite. Bottled solutions of sodium hypochlorite were sold under numerous trade names.

Bye Products ::: NEVER use this product as it contains hazardous mixture.

This is bye products of HEAVY / Metal industries. During treatment of main products, huge quantities of SOD. HYPO Chlorite produce, with mixture of many unwanted toxic impurities . This is completely waste of the plant , but sold by traders to satisfy market demands.

Images: Alt
Get MSDS
Get Technical Bulletin
Connect On Whats App


Calcium Hydroxide

Size:

Color:

Product Short Description: Calcium Hydroxide pure powder
Product Technical Specification:

Chemical Characteristics
 

Parameter                                                Test Method Test Result
Calcium Hydroxide Ca(OH)2 ASTM C-25 98.0 % min
Iron Oxide Fe2O3 ASTM C-25 0.30 % max
Aluminium Oxide Al2O3 ASTM C-25 0.20 % max
Sulfur S LECO 0.16 % max
Insoluble matters   0.5 % max
Chloride ppm Cl LECO 320 max
Magnesium Oxide MgO LECO 0.7 % max
Phosphate ppm PO4 LECO 600 max
Silicon Oxide SiO2 LECO 0.50 % max
Carbon Dioxide, wt % CO2 LECO 0.85 % max
Humidity % H2O  ASTM D-95 1.0 % max.

Appearance

White Powder

Odor

Odorless

Density

2.211 g/cm3, solid
Calcium (Ca) 53.50%
Crystalline Silica <0.1%
Acid Insoluble
Substances		 0.07%
Silica (SiO2) 0.2%
Remarks:

Products based on calcium hydroxide have a surprisingly wide variety of applications. The fact is that slaked lime has been used since time immemorial and with amazing results. Some of imprtant application as below -

  • Waste Water/Water Treatment
  • Construction
  • Flue Gas Treatment
  • Chemical Processes and Chemical Reactions
  • Petrochemicals
  • Calcium Salts (citrates, phosphates, stearates),
  • Acid Neutralization
  • Chemical Reactions
  • Calcium Enrichment (food, pharmaceutical, neutraceutical).

 

Calcium hydroxide can be found in the food industry providing calcium and as a pH modifier, as well as in the management of gases, as it has a high effectivity in the capture of acidic pollutants from industrial smoke and vapours. It is also an additive in feeds improving animal nutrition, and is used in animal-pens for its disinfecting power, lowering the number of pathogens and virus. In the sugar-industry it can be used to precipitate out impurities and to obtain purified sucrose.

It also brings benefits in sludge treatment as it is an exceptional aid in the elimination of micro-organisms and bacteria which at the same time neutralizes bad smells.Its properties are especially useful for water treatment, because it acts as a clarifier, a coagulant, a neutralizer and for the precipitation of dissolved pollutants.

Images: Alt
Get MSDS
Get Technical Bulletin
Connect On Whats App


Slip Barrier Coats HOLD BLOCK

Size:

Color:

Product Short Description: Polymer BASED non reactive coating materials which makes thin film barrier on surface after dry. Due to formation of RXSOL THIN barrier film on surface, the cleaning operation after unloading becomes quicker and easier with optimum results.
Product Technical Specification:
  • Product metal against corrosive cargo
  • Products paint against cargo penetration
  • Environmentally friendly
  • Safe to  use in occupied / covered areas
  • Reduces turn around times
  • Easy to direct spray
  • If hold cleaning is to be performed from tank top level only powerful equipment designed for cargo hold cleaning will do the job in a minimum of time.
  • Effective cleaning chemicals that can dissolve stains and remove discoloring are required the crew needs to have effective  equipment to apply these chemicals from tank top level personal proactive equipment is required depending on type and condition of hold paint chemical that protect the paint may also be needed
  • And don’t forget procedures  have to be drown up and your
  • Crew  trained for the job Standardization of equipment and chemical onboard you ship will make life easier for your seaman and save your time
Remarks:

Refer this link for complete set of HOLD CLEANING KIT  ::: http://rxmarine.com/Ship-hold-cleaning-kit-set-supplier

SLIPcoat supplier in Sohar Muscat Oman, Fujairah Dubai UAE

 

What is Hold Block and why hold block application is better than LIME WASH?

When aggressive or corrosive dry bulk cargoes—such as fertilizers, salt, coal, or sulphur—come into direct contact with the metal surfaces of ship holds, they can cause rapid corrosion and surface degradation due to chemical reactions. This not only weakens the structural integrity of the vessel but also leads to costly repairs and safety risks.

To prevent such reactions and ensure long-lasting surface protection, a polymer-based protective coating is the ideal solution.

Why Use Polymer based HOLD BLOCK Coating in Cargo Holds?

  • Chemical Resistance
    Acts as a barrier against corrosive cargoes, preventing direct metal contact and chemical reaction.

  • Easy Application
    Applied by brush, roller, or spray before cargo loading. Forms a durable, even protective film.

  • Temporary or Voyage-Specific Use
    Perfect for short-term voyages carrying highly reactive cargoes, allowing for easy cleaning and reapplication after discharge.

  • Prevents Pitting & Rust Formation
    Shields steel from moisture, acidic residues, and abrasion, reducing long-term maintenance costs.

 

Field and Typical Applications of HOLD BLOCK

 

  • Sulphur

  • Salt

  • Phosphates

  • Urea

  • Coal & Petcoke

  • Cement

  • Bauxite

Why Hold Block is better choice than LIME COATING

  • Polymer-based water-resistant coating

  • Safe on all standard marine metal surfaces

  • Compatible with hold cleaning chemicals

  • Non-reactive, non-toxic, and easy to remove

  • Protects for the entire duration of cargo voyage

 

Recommended Use of Cargo Hold Block 

 

Apply 1–2 coats uniformly across cargo hold surfaces prior to loading reactive cargo. For enhanced protection, focus on:

  • Tank tops

  • Bulkheads

  • Frames and internal structures

  • Hatch coamings

Cargo Hold Block Available Across Indian UAE Oman coastal:

  • UAE: Dubai, Fujairah, Abu Dhabi, Sharjah, Khor Fakkan

  • Oman: Muscat, Sohar, Duqm, Salalah

  • India: Mumbai, Kandla Mundra Jamnagar Sikka, Kolkata Haldia Paradip, Visakhapatnam, Chennai Manglore

Images: Alt
Get MSDS
Get Technical Bulletin
Connect On Whats App


HP Wash

Size:

Color:

Product Short Description: This is specifically formulated for use with high pressure advanced technology cleaning machine. Copmpatible with most painted surface and dries leaving a good shine. Quickly dissolves and removes grease and dirt deposits after emulsfication. Eco
Product Technical Specification:

 

Product Properties

 

Characteristics

APPEARANCE

Grennish liquid

Versatile for multi purpose cleaning.

DENSITY

In g/cm3 : 1.1 at 15°C

Cuts through heavy grease and grime 

COMPATIBILITY

 

Economical – dilute for most cleaning needs 

Metal

Avoid contact with aluminium, zinc,

tin and their alloys. In concentrated stage . 

Formulated for use with High Pressure cleaning machines.                         Non-flammable.

Rubber

May swell

Suitable with hot or cold high pressure eqp. 

pH Neat

13 - 14

Free from caustic . 

PACKAGING

RXSOL HP 3005 20/25/35/210 Lts

cleaning of cargo holds, tanks and refrigeration vessels. fishing vessels holds and machinery

Note:- After cleaning affects shining property. Can be used for cleaning of outside paintwork and decks .

  **Read the Material Safety Data Sheet before using this product**

Remarks:
Images: Alt
stock-clearance.png