Buffer Cleaner
Oman Chemical is leading one Largest Supplier, Manufacture a
Product Code: RXSOL-19-1779-050
Chemical Properties
The chemical properties of water are determined by the polarity of the water molecule and the strength of the hydrogen bond.
Water is a polar molecule, meaning that the electrons in the molecule are not evenly distributed. One end of the molecule is positively charged (the hydrogen atoms) and the other end is negatively charged (the oxygen atom). This polarity allows water to dissolve many different types of molecules.
The hydrogen bond is the attraction between the hydrogen atom in one water molecule and the oxygen atom in another water molecule. This bond is very strong and allows water to dissolve many different types of molecules.
Specification ::
| CAS number | : 7727-73-3 |
| Molecular formula | : Na2SO4•10H2O |
| Molecular weight | : 322.19 (142.04anhy) |
| Appearance (Color) | : Translucent or white |
| Form | : Crystals or crystalline powder |
| Assay (unspecified) | : >98.5% (dry wt. basis) |
| Loss on Drying | : 52.0-57.0% (8.5-10.5 waters, 130°C/const. wt.) |

Product Code: RXSOL-81-8204-025

Product Code: RXSOL-81-8197-220
RXSOL-81-8197-220 is a colourless, slightly viscous liquid with a mild amine odour. It is miscible with water, alcohols, and aromatic hydrocarbons but relatively immiscible with aliphatic hydrocarbons and ethyl ether.
Chemical Names: 2-(2-AMINOETHOXY)ETHANOL, Diglycolamine, 929-06-6, 2-Aminoethoxyethanol, Ethanol, 2-(2-aminoethoxy)-, Diethylene glycol amine

Product Code: RXSOL-81-4049-210
Physical Properties :
- Odour: Odourless
- Appearance: colourless to yellow, miscible with water
- pH 11,5 - 14
- Boiling point 100 °C at 760 mm /Hg
- Density 1,155 - 1,190 g/cm3 at 20 deg C

Product Code: RXSOL-81-2065-250
| Appearance | : Clear Liquid. |
|
Color |
: Colourless to pale yellow |
|
Odour |
: Mild |
|
pH |
: 2.0 - 3.5 Acidic |
|
Boiling point |
: 103.6 °C |
| Flash point | : Non-flammable |
| Flammability | : Non-flammable |
| Solubility in water | : Soluble |
| Density | : 1.20-1.27 g/cm3 |

Product Code: RXSOL-81-1210-220
Description: Mono Ethylene Glycol with inhibitor dipotassium hydrogen phosphate
|
Test Description |
Specification Limits Min. Max. |
Unit of Measure |
Test Method |
|
Acidity (as acetic acid) |
0.001 |
%(w/w) ASTM D-1613 |
|
| Alkalinity | 10 | 10 | |
|
Iron |
0.1 |
ppm ASTM E-202 |
|
|
DEG |
05 |
%(w/w) SD-498 |
|
|
Aldehyde (as acetaldehyde Chloride) |
10 |
ppm |
|
|
Ash |
4 |
3%(w/w) ISI 5295 |
|
|
pH at 20oC |
6.5 |
6.5 |
|
| pH on dilution with 25% water | 8.3 | 8.3 | |
|
Appearance |
Clear |
Clear |
|
| Freezing Point at 25% dilution | -11°C | -11.5 °C | |
|
UV Tansmittance wavelength % |
|||
|
220 |
70 |
nm |
|
|
275 |
90 |
nm |
|
|
350 |
98 |
nm |
|

Product Code: RXSOL-81-2225-210

Product Code: RXSOL-81-2224-210
| Physical state | : | Liquid |
| Appearance | : | Aqueous Solution |
| Odor | : | Alcohol |
| Color | : | Clear Yellow |
| Odor threshold | : | Not applicable |
| pH | : | 9-11 |
| Freezing point | : | 5 °C / 41 °F |
| Boiling point | : | ~ 100 °C / 212 °F |
| Flash Point | : | > 93.3 °C / > 199.4 °F |
| Specific gravity | : | 0.99 - 1.05 g/cm3 |

Product Code: RXSOL-81-1306-050
Specification
ROCK Salt
Sodium Chloride
NaCl
odorless, white color free flowing crystals Solution with water will be transparent
85% between 200 to 600 micron Sodium Chloride 99.6% Min on dry basis
Total calcium salt as Ca by mass Maximum 0.04 %
Total Magnesium salt as Mg by mass Maximum 0.04 %
Total Sulfates as SO4 by mass Maximum 0.1 %
Matter insoluble in water by mass Maximum 0.05 %
Iron compound as Fe Maximum 5 ppm
Non Caking agent Maximum 10 ppm
Alkalinity as Na2CO3 Maximum 500 ppm
Bulk density 1300 Kg/m3
Moisture Maximum 0.1 %
PH of 10% solution 7.5

Product Code: RXSOL-81-8208-025
APPEARANCE : White/off white free flowing powder.
BULK DENSITY 1.0-1.1 gm/CC.
ODOR Oderless.
pH 1% Solution 9.5-10.5.
