Paint and Cleaning solvent-18 | Page 5 | Marine Chemicals,Tank Cleaning Chemicals,Water Chemicals Products,Cooling Water Treatment Chemicals

BITUMEN PAINT

Product Short Description: A multi purpose bituminous product supplied in a paint consistency. Applicable as an adhesive primer, coating or for tree surgery. Good water, acid and alkali resistance. Suitable for protection of galvanised iron gutters, downpipes, metal railings and

Product Technical Specification:

Surfaces must be clean, dry and free from grease, oil, wax or any loose contaminating material.

New metal surfaces should be allowed to weather for a minimum of three months prior to coating.

Over rusted surfaces it is essential to remove loose rust or scale, wire brushing will do, prior to coating.

Appearance:	A thin black liquid, with a strong solvent odor
Solids Content:	Above 35%
Dangerous Goods Class:	3
Poisons Schedule Number:	5

Remarks:

Not suitable for use or as waterproofing membrane/coating.

Do not use in exposed situations, as U.V. rays can affect it. Therefore it must be overpainted with Ormonoid Silvershield.

Precautions should be taken to avoid skin or eye contact or swallowing the product.

Splashes or other accidental skin contact should be washed off immediately.

Wear safety glasses, overalls and impermeable gloves, e.g. PVC.

For a full MSDS contact your Davco state offic

Images:

Wood Varnish cleaner

Product Short Description: Cleaning of Wood varnish For general maintenance is tricky job, first of all wipe varnished wood with a soft dry cloth to remove dust. Then apply a RXSOL-15-1054-010 for complete remover of varnish from surface.

Product Technical Specification:

Remarks:

Images:

RXSOL H (Aromatic Hydrocarbon)

Product Short Description: RXSOL H is a low aromatic white spirit with a flash point above 61ºC, higher than conventional Low Aromatic White Spirit.

Product Technical Specification:

Property	Unit	Method	Value
Density @15°C	kg/l	ASTM D4052	0.785
Cubic Expansion Coefficient @20°C	(10^-4)/°C	Calculated	9
Refractive Index @20°C	-	ASTM D1218	1.437
Color	Saybolt	ASTM D156	+ 30
Bromine Index	mg Br/100g	ASTM D2710	200
Copper Corrosion (3hr @100°C)		ASTM D 130	1
Doctor Test		D 235	Negative
Non Volatile Matter	mg/100ml	ASTM D1353	1
Distillation, IBP	°C	ASTM D86	182
Distillation, EP	°C	ASTM D86	206
Relative Evaporation Rate (nBuAc=1)		ASTM D3539	0.05
Relative Evaporation Rate (Ether=1)		DIN 53170	200
Antoine Constant A #	kPa, °C		6.14569
Antoine Constant B #	kPa, °C		1636.33
Antoine Constant C #	kPa, °C		200.436
Antoine Constants: Temperature range	°C		+50 to +175
Vapor Pressure @20°C	kPa	Calculated	0.05
Saturated Vapor Concentration @20°C	g/m³	Calculated	3
Paraffins	% m/m	GC	47
Naphthenes	% m/m	GC	40
Aromatics	%v/v	ASTM D1319	12
Benzene	mg/kg	GC	< 3
Sulfur	mg/kg	SMS 1897	< 0.5
Flash Point	°C	ASTM D93	64
Auto Ignition Temperature	°C	ASTM E659	281
Explosion Limit: Lower	%v/v	-	0.7
Electrical Conductivity @20°C	pS/m	-	< 1
Pour Point	°C	ASTM D97	<-30
Surface Tension @20°C	mN/m	Du Nouy ring	26
Viscosity @25°C	mm²/s	ASTM D445	1.5
Hildebrand Solubility Parameter	(cal/cm³)^½		7.7
Hydrogen Bonding Index			0.5
Fractional Polarity			0
Heat of Vaporization @Tboil	kJ/kg		270
Heat of Combustion (Net) @25°C	kJ/kg		44500
Specific Heat @20°C	kJ/kg/°C		2.0
Thermal Conductivity @20°C	W/m/°C		0.14
Molecular Weight	g/mol	Calculated	158

For quality control analyses, local test methods may be applied that are different from those mentioned in this datasheet. Such methods have been validated and can be obtained through other. Rxsol H does not contain detectable quantities of polycyclic aromatics, heavy metals or chlorinated compounds.

Remarks:

Storage : Store Cool and Dry Palce. Keep Far away from direct flame.

Images:

Paint Remover 10 Ltr

Product Short Description: Excellent product for removal of paint from tough painted surfaces. Useful in the maintenance of all types of Industrial plant and in the oil field and marine industry.

Product Technical Specification:

Remarks:

Images:

TOLUENEDIISOCYANATE

Product Short Description: Toluene Diisocyanate TDI, physically colorless to pale-yellow liquid with a sharp, pungent odor used predominantly in the production of Polyurethanes FOAM and COATING.

Product Technical Specification:

TOLUENE DIISOCYANATE
Test	Results
Purity	99.5% Min.
Total Acidity	40 ppm Max.
Hydrolyzable Chlorine	60 ppm Max.
total Chlorine	500 ppm Max.
2,4/2,6 Isomers Ratio	80/20 ± 1
APHA Colour	25 Max.

Remarks:

PRODUCT NAME	:	TOLUENEDIISOCYANATE
CAS number	:	584-84-9
UN number	:	2078
Formula	:	CH3C6H3(NCO)2
Odour	:	PUNGENT
Solubility in water	:	REACTION
Density	:	1.22 at 20 ^oC
Boiling point	:	251^oC
Melting point	:	20 ^oC
Viscosity	:
Flashpoint	:	132 ^oC
Explosive limits	:	0.9 -9.5 Vol%
Vapour pressure	:	.01 mbar at 20 ^oC
Skin absorption/irritation	:	YES
TLV Country NL Year 1995	:	0.005 ppm 0.04 mg/m3
Pollution category 1994	:	C

Images:

Paint Remover

Product Short Description: Excellent product for removal of paint from tough painted surfaces. Useful in the maintenance of all types of Industrial plant and in the marine industry.

Product Technical Specification:

Remarks:

Contact with skin can cause serous chemicals burns. Avoid contact with skin & eyes.Wear PVC gloves while handling. Do not take internally. Spl-ashes of the product or its solutions on the skin or clothing should washed immediately with cupious amount of water . If the eyes are affected should be washed with water for at least 15 minutes and seek medicals attention sought immediately.

Images:

Turbo Cleaner Dry Walnut Shell

Product Short Description: Walnut shell Soft Abrasive for turbo cleaning, filter media, Oil absorption, polishing gems and jewellery and many more.

Product Technical Specification:

Wide range of grades available, including custom orders
Gentle – clean surfaces without damaging underlying material
Porous – can be used to absorb contaminants
Organic: renewable and environmentally friendly
100% silica-free
Re-usable

Specification :
Physical Characteristics

Appearance:	Brown color, solid natural granules
Size:	1 - 1.5 mm. (new tolerance) Also refer above " Description " section
Corrosive action	None
Safety Risk / Advise	None
Specific Gravity:	1.2 – 1.4
Hardness:	3 on MOHS scale
Moisture:	NMT 11% by weight
PH:	7.5
GSA Specification:	AA‐1722 Type 2
Chemical Analysis ‐ % by weight	Nitrogen: .10 Specific Cellulose: 40/60 Lignin: 20/30 Toluene: .5/1.0 Solubility: 6.5
Military Specification:	MIL‐G=5634, Type 3
Methoxyl:	1.0
Chlorine:	1.5
Ash:	1.0

Remarks:

Offer Walnut Shell pieces/walnut shell powder for chemical industrial.

Processing walnut shell pieces, walnut shell powder with any size. We process a large quantity per month and packing as per inquiry.

Product: Walnut shell pieces
Origin: INDIA
Grade:
-walnut shell pieces
-small shell pieces
-walnut shell powder

Packing: 1MT/flexi bag or bulk or as customer’s request in 25 Kg

Supply Location : Fujairah, Mumbai, Kandla, Kolkata, Visakhapatnam, Dubai, Sharjah, Abudhabi
For Export Min quantity: 1x40feet (20MT)
For Local Supply : 25 Kg BAG

Images:

LiveChat

Search form

Vinyl Polish

Vinyl Polish (Thermoplastic Floor Finish)

BITUMEN PAINT

Wooden Polish Liquid

Wood Varnish cleaner

RXSOL H (Aromatic Hydrocarbon)

Paint Remover 10 Ltr

TOLUENEDIISOCYANATE

Paint Remover

Turbo Cleaner Dry Walnut Shell

RX SOL

LATEST POSTS

Buffer Cleaner

Caustic Soda

Find Us

LiveChat