Buffer Cleaner
Oman Chemical is leading one Largest Supplier, Manufacture a
Your shopping cart is empty.
| Property | Typical value |
|---|---|
| Appearance | Clear to slightly opalescent, colorless–pale straw |
| Density | 1.15 - 1.2 kg/L |
| pH (neat) | Acidic |
| Solubility in water | Miscible in all proportions |
| Insolubles | ≤ 0.2 % (water-treatment grade) |
Works best when pH of water is 6-7
Key Features of Coagulant Clear AL
Physical Properties and Tecnical Specification
| Appreance | : | Liquid |
| Colour | : | Clear, Brown |
| Odour | : | Odourless |
| pH | : | Alkaline |
| Flash point | : | Not flamable |
| Boiling Point | 109 °C | |
| Freezing point | NA | |
| Solubility in Water |
Soluble in any ratio |
1) Acidic Radiator Cleaner: For Heavy scales and dirt (PH : 1.0 to 3.0) ::: RXSOL-16-2697-025 ( Acidic )
2) Basic Radiator Cleaner (Conditioner): For Light scale and dirt (PH : 9.0 to 12.0) ::: RXSOL-40-4051-025 ( Alkaline )
3) Special Type of Radiator Cleaner in powder form
| Product Properties | ||
| Appearance | Clear Colourless Liquid | Vapor Density : Heavier than air |
| Flash Point |
63°C (Closed Cup) |
Stability : Very stable understandard,.normalconditions |
| Compatibility | ||
|
Metal
Plastic |
No known effect |
Note: After use the product must always be well sealed in the drum. |
| Packaging | Order No | Size (in kgs./lts.) |
|
RXSOL-16-1077-025 |
7/25 Lts |
RX MARINE INTERNATIONAL are continiously working in water treatement sector, And developed many unique product to avoid corrosion and scale depositon in cooling water system. Here I wants to keep our experiment results with you.Corrosion inhibitor for closed cooling systems containing molybdate/phosphonate ( RXSOL-40-4018-025 ). Sodium molybdate has the advantage in that the dosing of lower ppm's of molybdate allow for lower conductivity of the circulating water. Sodium molybdate at levels of 50-100 ppm offer the same levels of corrosion inhibition that sodium nitrite at levels of 800+ ppm. By utilizing lower concentrations of sodium molybdate, conductivity is kept at a minimum and thus galvanic corrosion potentials are decreased.
Before testing of Nitrite level, Here is some point and guideline, what you need to do. : 1 take the following readings; pH, TDS (uS), and nitrite level.and record. 2 add the Chemical your are using. 3. wait for a period of time for the sysem to circulate.
for a period of time.
If the TDS and Nitrite drop you have a leak/ unknown makeup. if the TDS stays stable and the nitrite drops you have a biological problem. Bacteria that convert nitrite to nitrate.
Solution ::: Use DI water in place of general water, And also use. Algaecide to control Bacterial growth inside water system ... http://rxmarine.com/Biocide-
Characteristics of Paraffin Wax Slab
| Characteristics | Test Method | Standard Results |
| Drop Melting Point, deg C | ASTM D 127 | 58-62 |
| Oil Content, %, MAX | ASTM D 721 | 3-5 |
| Penetration at 25 deg C, 0.1mm MAX | ASTM D 1321 | 15-35 |
| Colour | VISUAL | WHITE to PALE yellow |
Wide range of grades available, including custom orders
Gentle – clean surfaces without damaging underlying material
Porous – can be used to absorb contaminants
Organic: renewable and environmentally friendly
100% silica-free
Re-usable
Specification :
Physical Characteristics
| Appearance: | Brown color, solid natural granules |
| Size: | 1 - 1.5 mm. (new tolerance) Also refer above " Description " section |
| Corrosive action | None |
| Safety Risk / Advise |
None |
| Specific Gravity: | 1.2 – 1.4 |
| Hardness: | 3 on MOHS scale |
| Moisture: | NMT 11% by weight |
| PH: | 7.5 |
| GSA Specification: | AA‐1722 Type 2 |
| Chemical Analysis ‐ % by weight |
Nitrogen: .10 Specific Cellulose: 40/60 Lignin: 20/30 Toluene: .5/1.0 Solubility: 6.5 |
| Military Specification: | MIL‐G=5634, Type 3 |
| Methoxyl: | 1.0 |
| Chlorine: | 1.5 |
| Ash: | 1.0 |
Offer Walnut Shell pieces/walnut shell powder for chemical industrial.
Processing walnut shell pieces, walnut shell powder with any size. We process a large quantity per month and packing as per inquiry.
Product: Walnut shell pieces
Origin: INDIA
Grade:
-walnut shell pieces
-small shell pieces
-walnut shell powder
Packing: 1MT/flexi bag or bulk or as customer’s request in 25 Kg
Supply Location : Fujairah, Mumbai, Kandla, Kolkata, Visakhapatnam, Dubai, Sharjah, Abudhabi
For Export Min quantity: 1x40feet (20MT)
For Local Supply : 25 Kg BAG
We are marine chemical supplier since 1996.These Marine Chemicals include different sets of products such as Tank Cleaners, Maintenance Chemicals, Cooling Water Treatment Chemicals, Boiler Water Treatment Chemicals, Fuel Additives, etc.
Oman Chemical is leading one Largest Supplier, Manufacture a
Oman Chemical is leading one Largest Supplier, Manufacture a
