Buffer Cleaner
Oman Chemical is leading one Largest Supplier, Manufacture a
PRODUCT SPECIFICATION/ PROPERTIES
Appearance |
:Liquid |
Colour |
:Clear (Custom Dyes may be added) |
Odour |
:Slightly bitter or Mild |
Specific Gravity |
:1.02-1.10 |
pH |
:11-12 (100% Concentration) |
Stability |
:Stable |
Boiling Point |
:100°C |
Freezing Point |
:-5 °C |
Flash Point |
:Not applicable |
Vapour Pressure |
:Not Applicable |
Stability |
:Stable |
EQUIPMENT
RXSOL ORG LOCO 20™Locomotive Cleaner is best applied to a locomotive with a low-to-moderate pressure foaming mechanism. Line pressure should be in the range recommended by the foam equipment manufacturer. This is usually in the range of city water pressure, or 30-100psig. Therefore, city water pressure can be used as the motive force to both drive water of dilution through an in-line mixer and suck Locomotive Cleaner into the line in advance of the foamer. Alternatively, Locomotive Cleaner can be applied directly to the locomotive at full strength with nearly any type of low-pressure sprayer. Locomotive Cleaner should be rinsed off using a high pressure sprayer/washer that delivers at least 2000psig at the nozzle discharge. Fan spray-type or wedge-type nozzles can be used for both foam-on and rinse-off operations. Material of construction for pumps, lines, valves, etc. should be mild steel, stainless steel, cast iron or plastic/polymeric.
PROTECTIVE EQUIPMENT
Although RXSOL ORG LOCO 20™ Locomotive Cleaner is non-hazardous and has low levels of aggressiveness to human tissue, it is always wise to prevent cleaners from contacting skin and eye tissue for prolonged or repeated periods of time. Skin sensitization is always possible over time. Use of water resistant gloves, boots and clothing and goggles or safety glasses plus a face shield and hard hat are recommended, especially for large jobs such as locomotive cleaning.
FUTURE :
BENEFIT
ADVANTAGE :
KEEP OUT OF REACH OF CHILDREN:
WARNING:Harmful or fatal if swallowed. May irritate eyes. Keep away from high heat. External- Flush with water. Internal- Call Physician immediately. If splashed in eyes, flush eyes and under eyelids with plenty of cool water.
TYPICAL PHYSICAL AND CHEMICAL PROPERTIES:
Physical State | : | Liquid |
Solubility in Water | : | Insoluble |
Boiling Point | : | >190°F |
Flash Point, COC | : | 190°F |
Total Chlorine/Chloride, wt% | : | 0.00/0.00ppm |
Appearance and Odor | : | Opaque/Chemical |
Specific Gravity | : | 0.82 |
VOC Content (ASTM D2369) | : | 58% |
pH Concentrate | : | NA |
Total Sulfur, wt% | : |
0.00 |
FEATURES & BENEFITS
VERSATILE:
Corrosion Inhibitor for metal RUST Preventive rapidly displaces water from metal surfaces leaving a continuous polar protective film between the metal and water.
Corrosion Inhibitor for metal RUST Prevantive is applied with in-process spray or dip tank application where fluid run-off is collected for reuse, water will settle quickly to the bottom of the rust preventative reservoir. The water can then be drained periodically from the bottom.
Corrosion Inhibitor for metal RUST Prevantive can be applied to wet or dry parts. It neutralizes fingerprint residues and protects ferrous and non-ferrous metals from corrosion.
CHARACTERISTICS | TYPICAL VALUES |
Appearance | : Clear, Fluid |
Odor | : Characteristic |
Spcific Gravity | : 0.85 - 0.95 |
% Volatiles | : 95 ± 2 |
Surface Tension (dynes/cm) | : 38 |
Dielectric Strength (kV/mm) | : 20 (min) |
Dielectric Constant | : 1.8 |
Humidity Cabinet Resistance (days) | : 7 (min) |
Degreasing Efficiency (%) | : 98 |
Compliance by FTIR (%) |
: 97 |
Typical Properties
Appearance Visual |
: Clear to Slight Hazy Liquid |
Colour Visual | : Light to Dark Blue |
Odour | : Citrus |
pH (100 % Conc) | : 12 - 14 |
pH 5% Solution with water | : 10 -12 |
Specific Gravity @ 25°C | : 1.0 ± 0.1 (Method ASTM D 1298 ) |
Factor - T | : 220 - 245 |
Refractive Index factor | : 4.4 - 5.2 |
Base number | : 1.5 - 2.5 |
Surface tension @ 20°C | : 30 ± 2.0 |
Chloride Content | : 50ppm max |
Break point |
: Corrosion 5 max |
Cobalt Metal melts at 1493 degrees centigrade and boiling point 3100 degrees centigrade.
Cobalt Metal used as :
For Chemical Products
Petro Refining, Petrochemical Catalysts.
In paints as a paint dryer and various dyes
Cutting tools and diamond cutting
Hybrid car and telephone batteries
Super alloys
Aerospace Industries
High speed Alloys
Glass and Ceramics
Animal feed industry
Main constituent of high temperature and high
performance alloys
Improves strength property and increases melting point
Permanent Magnet
PRODUCT SPECIFICATION/ PROPERTIES
Appearance |
:Liquid |
Colour |
:Clear (Custom Dyes may be added) |
Odour |
:Slightly bitter or Mild |
Specific Gravity |
:1.02-1.10 |
pH |
:11-12 (100% Concentration) |
Stability |
:Stable |
Boiling Point |
:100°C |
Freezing Point |
:-5 °C |
Flash Point |
:Not applicable |
Vapour Pressure |
:Not Applicable |
Stability |
:Stable |
EQUIPMENT
RXSOL ORG LOCO 20™Locomotive Cleaner is best applied to a locomotive with a low-to-moderate pressure foaming mechanism. Line pressure should be in the range recommended by the foam equipment manufacturer. This is usually in the range of city water pressure, or 30-100psig. Therefore, city water pressure can be used as the motive force to both drive water of dilution through an in-line mixer and suck Locomotive Cleaner into the line in advance of the foamer. Alternatively, Locomotive Cleaner can be applied directly to the locomotive at full strength with nearly any type of low-pressure sprayer. Locomotive Cleaner should be rinsed off using a high pressure sprayer/washer that delivers at least 2000psig at the nozzle discharge. Fan spray-type or wedge-type nozzles can be used for both foam-on and rinse-off operations. Material of construction for pumps, lines, valves, etc. should be mild steel, stainless steel, cast iron or plastic/polymeric.
PROTECTIVE EQUIPMENT
Although RXSOL ORG LOCO 20™ Locomotive Cleaner is non-hazardous and has low levels of aggressiveness to human tissue, it is always wise to prevent cleaners from contacting skin and eye tissue for prolonged or repeated periods of time. Skin sensitization is always possible over time. Use of water resistant gloves, boots and clothing and goggles or safety glasses plus a face shield and hard hat are recommended, especially for large jobs such as locomotive cleaning.
FUTURE :
BENEFIT
ADVANTAGE :
Typical Physical Properties | RXSOL-16-3764-210 |
RXSOL-16-3764-210 No Dye
|
Appearance | Clear Dark Green Mobile Fluid | Clear Amber Fluid |
Specific Gravity @15.6°C | 1.063 | 1.063 |
pH (neat) | 10.0 | 10.0 |
pH @ 2% | 9.4 | 9.4 |
Pour Point | -40°C (-40°F) | -40°C (-40°F) |
Kinematic Viscosity (cSt)-20°C (-4°F) | 740 | 740 |
0°C (32°F) | 82 | 82 |
20°C (68°F) | 20 | 20 |
40°C (104°F) | 7 | 7 |
Water-glycol fluids results Lubrication and component life systems containing pumps with plain bearings or lightly loaded ball and roller bearings designed to operate with water glycol fluids. This is best product to reduce its maintenance costs
Suitable for demanding hydraulic applications where there is a high fire risk, such as those found in the Metal and Mining industries.
Form | Liquid |
Colour | Clear |
Odour | Mild |
Odor Threshold | No Information Available |
pH Concentrate | < 1 |
Specific Gravity | 1.38 - 1.43 at 25ºC |
Boiling Point | 101°C |
Flash Point |
Not Applicable |