Drilling Fluids & Mud Oil Field chemicals-81 | Page 18 | Marine Chemicals,Tank Cleaning Chemicals,Water Chemicals Products,Cooling Water Treatment Chemicals

RXSOL ORG - 16 (Flotrol)

Product Short Description: Rxsol ORG - 16 (Flotrol) filtration-control additive is a special starch derivative used in Flo Pro systems

Product Technical Specification:

Physical Proprties :

Physical appearance : White powder
Specific gravity :1.5
Solubility in water :100%

Remarks:

Images:

DEEP CLEAN Drilling Fluids Cleaner

Product Short Description: Rxsol Deep Clean combines the dissolving capacity of powerful hydrocarbon solvents with the water-wetting capability of optimized Hydrophile-Lipophile Balance (HLB) surfactants, creating a double emulsion.

Product Technical Specification:

Physical Properties

Appearance          : Clear yellow to tan liquid
Solubility in water : Dispersible
Specific gravity      : 0.92
Flash point           : 143° F (61° C) (closed cup)

Remarks:

Images:

Mica Loaves Sack

Product Short Description: Mica Loaves Sack

Product Technical Specification:

U.S.S. # 6....................................................<1.0%
Below U.S.S. #100 in Pan......................................20.0%
TYPICAL PHYSICAL/CHEMICAL PROPERTIES
Bulk Density.................................................70 lbs./cu.ft.
Loss on Ignition.............................................1.5 - 2.5
Percent Moisture......................................... ...2% max
Specific Gravity.............................................2.75
pH............................................... ...........8.0
Moh's Hardness...............................................2.5

Stable, virtually inert except to hydrofluoric and concentrated sulfuric acid.
Impervious to water and atmosphere.Unaffected by exposure to extended low and high temperatures.

TYPICAL CHEMICAL ANALYSIS

Silica (SiO2)............................................64.7%
Alumina (Al2O3)..........................................16.3%
Iron (Fe2O3)........................................ .....2.6%
Iron (FeO)................................................0.8%
Soda (Na2O)........................................... ....1.4%
Potash (K2O)...............................................4.6%
Calcium (CaO)..............................................0.3%
Magnesium (MgO)............................................5.5%

Remarks:

Images:

Mica Fine Sack

Product Short Description: Mica Fine Sack

Product Technical Specification:

U.S.S. # 14...........................................................................................<1.0%
Below U.S.S. #100 in Pan............................................................. 30.0%

TYPICAL PHYSICAL/CHEMICAL PROPERTIES
Bulk Density...........................................................68 lbs./cu.ft.
Loss on Ignition....................................................1.5 - 2.5
Percent Moisture....................................................0 - .2% max
Specific Gravity........................................................2.75
pH...............................................................................8.0
Moh's Hardness......................................................2.5
Stable, virtually inert except to hydrofluoric and concentrated sulfuric acid.
Impervious to water and atmosphere.
Unaffected by exposure to extended low and high temperatures

TYPICAL CHEMICAL ANALYSIS
Silica (SiO2)..........................................................64.7%
Alumina (Al2O3)...................................................16.3%
Iron (Fe2O3)..........................................................2.6%
Iron (FeO)...............................................................0.8%
Soda (Na2O)..........................................................1.4%
Potash (K2O)..........................................................4.6%
Calcium (CaO).......................................................0.3%
Magnesium (MgO).................................................5.5%

Remarks:

Images:

Sodium Silicate Water Glass

Product Short Description: We supply both Neutral & Alkaline sodium silicate absolute transparent quality i.e. water white.

Product Technical Specification:

TESTING PROCEDURE :::
ANLYSIS PROCEDEURE OF SODIUM SILICATE : Take 5gm of sodium dilute it to 250ml in SMF with dist. Water , take 50 ml of the diluted solution add 2-4 drops of methyl red indicator. Then titrate it against IN {approx.} HCL Light Pink is the end point. Take this reading as “A” ml. To this solution add 5 gm of sodium fluoride dissolve properly add 6-7 drops of methyl red indicator titrate against IN HCL appearance of slight pink colour is the end point . Take this reading as “B” ml

CALCULATION For Na2O

“A”ml x 3.1 x normality of HCl = C%

Wt. Of sample

For Sio₂

_{“B”ml x 15.02 x normality of HCl}

Wt. Of sample X 10

Ratio of sodium silicate

% of SiO₂ i.e D%

% of Na₂o C%

Viscosity- AS PER IS 3944 B4 CUP

DETERMINATION OF IRON (as per Fe)

Botanic Potassium Thiocynate ;- dissolve 1.0gm of potassium thiocynate in10ml of water. Add sufficient n-butano to makeup to 100ml. Shake vigorously until the solution is clear.
Dilute H2SO4 :- approx.10%
Standard Iron solution : weight 0.702gm of Ferrus Ammonium sulfate. Dissolve in 10ml dilute H2SO4 then make up 1000ml with water. Transfer 10 ml of this solution in 100ml M.Flask and make up 100ml with water. 1ml of this solution is equivalent to 0.01mg of iron

PRCEDURE :

Sample Reading: take about 5gm of the sample accurately weighted. Dissolve it in distilled water and make the solution exactly 100ml. Take 10 ml of this solution add 1ml concentrated Nitric acid. Boil the solution and cool. Then transfer it into a nessler cylinder and add 30mg of Ammonium Persulfate and 15 ml of Botanic Potassium Thiocynate solution. Shake for 30 sec and allow the liquid to separate.
Blank reading : take 10 ml distilled water. Add 1ml concentrated Nitric acid boil the solution and cool. Then transfer it into a nesseler cylinder and add 30 mg of Ammonium Persulfate and 15 ml of Botanic Potassium Thiocynate solution . Shake for 30 sec. And allow the liquid to separate. Then add Standard Iron Solution until the colour of Butanol Layers in Both Cylinder (Sample & Blank)
CALCULATION :

Iron as Fe (%w) = 0.001 V

Where,

V= Volume in ml of Standard Iron Solution to add in Blank Reading

W= Weight in gm of sample

Remarks:

Sodium Silicate Liquid Neutral, Sodium Silicate Liquid Alkaline & Sodium Silicate Powder Neutral Manufacturer. We also keeping ready stock of these materials...
Sodium Silicate Liquid Neutral

Sodium Silicate Liquid Alkaline
Sodium Silicate Powder Neutral
Sodium Silicate Powder Alkaline
Sodium Silicate Glass Neutral
Sodium Silicate Glass Alkaline
Silica Gel
Sodium Silicate
Activated Carbon
Sodium Metasilicate
Silicate Chemicals

Images:

Barite - Barium Sulphate

Product Short Description: Barium Sulphate low absorption high density oil drilling compound

Product Technical Specification:

Appearance	: Free Flowing Powder
Specific Gravity	:4.2 g /cm3 Min
Water soluble earth alkaline metals as Calcium	: 90 - 100 o F
Character	: Non – Ionic
Wet screen Analysis%
Residue on us sieve no.200	: 6-8
Residue on us sieve no.325	: 6-8

Remarks:

Applications

Used widely as a filler in plastics
Ideal for making putties, primers, undercoat, epoxy paints, powder coatings and floor coating
Recommended for water proofing compounds and sealants

Chemical Composition
BaSO4	97% (± 2%) (Typical)
SiO2	1%
Fe2O3	0.10%
Al2O3	0.05%
CaO	0.20%
MgO	0.09%
LOI	0.65%

Physical Properties
Specific Gravity	4.4
Hardness	3 to 3.5 (mohs)
Whiteness	(Brightness) - 94
Oil absorption value	10
Moisture and volatile matter max	0.5% by Wt. (105 deg. C)
Water soluble matter max	0.5%
MgO	0.09%
Refractive index	1.64
Bulk Density	1.8

Images:

Potassium Chloride

Product Short Description: Potassium Chloride Exporter, Manufacturer

Product Technical Specification:

Appearance White free flowing crystalline powder

Density 1.98 SG

Bulk Density 71 to 78 Ib/ ft³

Aqueous Solubility Up to 24%, 278.9 gL of solution at 68˚F (20˚C)

Purity 98.83%-99%

K20 62% and above

Remarks:

Product Details:

Color White

Grade Standard Reagent Grade, Technical Grade

Packaging Size 50kg

Packaging Type HDPE bags

Physical State Powder, Granules, Crystals

Usage Industrial

Purity 99%

Images:

LiveChat

Search form

Corrosion Inhibitor for External

Corrosion Inhibitor Preteratment Filming Agent

RXSOL ORG - 16 (Flotrol)

DEEP CLEAN Drilling Fluids Cleaner

Mica Loaves Sack

Mica Mideum Sack

Mica Fine Sack

Sodium Silicate Water Glass

Barite - Barium Sulphate

Potassium Chloride

RX SOL

LATEST POSTS

Buffer Cleaner

Caustic Soda

Find Us

LiveChat